Archived Posts
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Ignite Modem (Arris XB6) Overheating

Ignite Modem (Arris XB6)I just got the ignite modem installed 2 days ago, and since then when I touch the modem it’s burning hot.. is that normal? It’s in open space, it has my home phone and smart home monitoring connected to the modem and nothing e...

Fearme by I Plan to Stick Around
  • 5305 Views
  • 8 replies
  • 0 likes

Arris XB6 Noisy

Just had Ignite TV with 150U installed this weekend. Has anyone noticed the Arris XB6 a little noisey. I can squeeze the modem casing and the noise stops. It is most likely a vibration from an internal fan. Wondering if it is worth my time to have th...

Pronk14 by I've Been Around
  • 4466 Views
  • 21 replies
  • 0 likes

Ignite TV - eero bridge/AP mode issues

Question?  Maybe someone else has seen this and can help me figure it out.   My current setup:   Rogers Modem (in router mode with wifi disabled) Connected to Eero mesh to distribute wifi in house.  Was running in bridge mode now it's now (see below)...

dperry by I've Been Here Awhile
  • 3833 Views
  • 21 replies
  • 0 likes

Ignite TV - WiFi Disconnects Randomly

I recent switched to rogers and have had the service for a few weeks now. The problem started last week  the WiFi would just shut off and be off for 3-5 mins every 2-4 hours. Restarted the modem would stop it from occurring for about one day. When th...

Azsune by I'm Here A Lot
  • 13147 Views
  • 71 replies
  • 0 likes

Resolved! Disabled WiFi on XB6 is getting enabled spontaneously

Something really weird started happening recently: the WiFi on my Technicolor XB6 is getting enabled spontaneously.  I have my own mesh network, so I have WiFi on the XB6 disabled.  What’s even worse is that my XB6 is also currently in bridge mode!  ...

-G- by Resident Expert
  • 4661 Views
  • 24 replies
  • 0 likes

Coax to Ethernet with Ignite TV?

Moving to an apartment and upgrading to Ignite. The set-top box/modem will be in a different room than my desktop computer which I want to hardwire into the network with Ethernet. There is a coaxial outlet in the computer location. Is there a coax-to...

edhovanec by I Plan to Stick Around
  • 4260 Views
  • 12 replies
  • 0 likes

Technicolor XB6 - Block a Device from Internet Access

Hey guys, I have a quick question, how do I block a device from internet access? I have the Technicolor XB6 and would like to block some of my IoT from internet access, but let them still have lan access. With my old Synology Router this was simple, ...

gp-se by I'm an Advisor
  • 1927 Views
  • 5 replies
  • 0 likes

Resolved! XB6 - Channels and Power levels

Hey, does anyone know if the Technicolor XB6 transmits at 1watt for both channels 149+ and the lower channels (36-48)? I know the Hitron would use lower power levels on channels 36-48, but full power for 149+.   *Added Labels*

gp-se by I'm an Advisor
  • 2062 Views
  • 5 replies
  • 0 likes

Resolved! Ignite TV - Pending Install : Arris XB6 vs. Technicolor XB6

First of all the Rogers Community Forums are a wealth of knowledge,  thank you to everyone for their experience good or bad,  and solutions provided.   My adventure into the  Rogers Ignite Tv  experience happens this Saturday, fingers crossed for a g...

Mike3023 by I Plan to Stick Around
  • 3283 Views
  • 4 replies
  • 0 likes
Labels