CGN3 status led is off!
CGN3 status led is off, US led is flashing and other leds are working well, is my CGN3 broken?
CGN3 status led is off, US led is flashing and other leds are working well, is my CGN3 broken?
Hi, I recently moved to Rogers, and am now the proud renter of a Hitron CGN3. However, I am unable to set it up such that I can have 2 xbox 360s with 'open' NATs. With my previous Bell Aliant modem, I set the uPNP setting on, had both of the xbox...
Good Day Ladies and Gentlemen, Posted on the DSLReports site at 2:28 pm Mon 20 Feb, is the following post from Netdog, an Arris engineer: Re: SB6190 Puma6 TCP/UDP Network Latency Issue Discussion Ok I have a new engineering build with some TCP/UD...
Hello I am on the rogers ignite 250u package and the internet has been very unstable lately over the past month. There are many disconnects daily on average. Most of the disconnects occur in the evenings from about 8 PM to 2AM but the timing is very ...
Ok, now for a little technical info that might help. First and foremost the CGN3ACR has been accessed by using 192.168.100.1 when the modem is operating in Bridge mode. So, it is possible in that case to access the DOCSIS WAN signal level and signa...
I have just upgraded my internet and was given a Hitron CGN3 modem and ever since i have been having problems with xbox live and getting kick from the net .. I have tried to port forward but is stays at nat : moderate and sometimes goes strict I hav...