Ignite TV™
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

New Ignite IPTV box - XiOne

For the past couple of weeks, I have been part of a group testing the new XiONE IPTV box.  It's similar to the Xi6, but is a bit smaller and uses about half the power.   Here are some differences between the XiONE and (Xi6).   AV1 CODEC4 GB memory (2...

JKnott by I'm a Reliable Contributor
  • 7 replies

Resolved! Ignite TV Box connect to an AORUS Monitor?

I was trying to connect an Ignite TV box to an AORUS FI32U gaming monitor via the HDMI cable.  The welcome screen displays then its followed by a snowy picture not allowing me to setup the box.   Has anyone ever connected an Ignite TV box to a gaming...

hector316 by I Plan to Stick Around
  • 4 replies


I cannot get ignite tv app to stream video content when using Firestick.  The app functions right up to choosing program to watch.  I get a message to disconnect HDMI, but the Firestick is using HDMI. How do I get this to function properly ken     **...

kenunny by I've Been Around
  • 1 replies

Requirements for HDMI switch and cables

I have Ignite box connected to my Denon receiver and currently get 4K HDR, through the whole chain.  Have the receiver set up so that Ignite connection is passed through when the Denon is turned off.  We got a record player for Xmas, but when listeni...

reed935 by I Plan to Stick Around
  • 5 replies

Ignite STB loses connection over HDMI extender

Setting up my Ignite service.  Ignite STB (Xi6-T) connected to TV via HDMI Ethernet extender (similar to https://www.monoprice.com/product?p_id=8009) shows “welcome” message from STB and then loses signal.  I’ve read a bit that it may be HDMI “handsh...

3rdparty by I Plan to Stick Around
  • 4 replies

Resolved! XR15v2-RQ Ignite TV external device input issues

Hi everyone, I am having difficulty to get my external devices to passthrough hdmi signal using the rogers box.   My setup is, rogers ignite box is directly connected to the only HDMI port I have on my screen and is able to stream TV channels OK. My ...

vulture by I Plan to Stick Around
  • 3 replies

Resolved! New Ignite TV Customer, Green Square of Death

I just got Rogers Ignite TV and Internet 3 days ago.  I have 4 TV's, and I have been able to set up my Ignite boxes on all but 1 TV.  When I try on this Sony TV (purchased in 2007), I get a square green screen.  This is what I have tried so far:   Un...

Giraffee66 by I Plan to Stick Around
  • 6 replies

Ignite tv ethernet port.

What would happen if I connected my PC to my set top box with an ethernet cable? My tv only has 1 hdmi port.   *** Edited Labels ***

Markt2 by I've Been Around
  • 1 replies

Looking for Guidance on Intel NUC boxes and Configuration

I currently have Rogers Communications Inc. providing Home Telephone, Cable TV and Internet Services through their Rogers Ignite TV bundled service.  These work off a single Arris Modem Model G3482ER3, Part No. TG02DCW3482RG and a copper coax drop fr...

Philip144 by I Plan to Stick Around
  • 10 replies

Ignite TV set-top boxes now support HDMI-CEC

Looks like a new feature recently got added to the Ignite TV set-top boxes: HDMI Device Control (HDMI-CEC)   It always kinda bugged me that the Power button on the Rogers Ignite (XR15) Remote (All Power on the older XR11 model) issued a "power on/off...

-G- by Resident Expert
  • 10 replies

Difficulty connecting to TV without HDMI

Not connecting to LG TVRecently got ignite TV. Tech hooked up the gateway and box to main tv.  told us was easy to hook remaining TV.  One tv required a VGA to HDMI adapter - which tech gave us, however we can't get the two to connect ( talk to each ...

littlegirl by I've Been Here Awhile
  • 7 replies

Resolved! Samsung tv issues with Rogers ignite TV

Hello, I have a 1-year old 55' Samsung UHD TV model RU7100 with latest software update installed. I had Rogers NextBox working fine on this TV for many months. I upgraded to Ignite TV and the technician installed the newest TV box and it worked fine ...

bargotti by I've Been Here Awhile
  • 8 replies

Resolved! Can't get 4K channels on my RCA 4K Smart TV Model RNSMU5836

I recently purchased a 58" RCA 4K UHD Smart TV. The HDMI ports are labeled HDCP 2.2 (one is also ARC capable). The Ignite TV box is plugged into one of the non-ARC ports.   I have gone into the TV settings Feature menu and enabled HDMI EDID 4K, but w...

HDCP Errors

Hey everyone, I noticed I'm having issues with watching 4k content on my Xi6 going through a Yamaha receiver. I get an error saying the box cannot output 4k because of a HDCP issue. If I unplug or restart the box with the TV and Receiver both on, the...

gp-se by I'm an Advisor
  • 4 replies

No signal on Rogers Box --> Projector?

I recently purchased an Epson 5050ub projector for my home theater, routed power and HDMI cables, all for it to be in vain because the Rogers Xi6-T box doesn't seem to want to connect to the projector. Other devices work fine, such as an XBOX 360 and...

Ignite Remote and Yamaha Amplifier

I'm looking to control a Yamaha HTR-6160 with my Rogers Ignite Remote.  The Yamaha is in a cupboard behind a door.  The TV is connected via HDMI cable to the Yamaha HTR-6160 and the volume is controlled by the Yamaha.  I want to be able to turn on th...

dgreensp by I've Been Around
  • 1 replies

Ignite HDMI handshake issues

I have my Ignite cable box > Sony AV Receiver > Samsung Plasma TV all through HDMI and I'm not getting a signal with the tv on, if I turn off the tv audio will go through my receiver but turning back on TV will give me no video or audio.   Ignite > T...

Constant reboot with Sanyo TV + Ignite TV

Hi I have a Sanyo model number is FW50C78F and this past week everytime I turn on the tv I have to unplug the HDMI connecter and replug it to be able to watch the tv . The technician came here yesterday said that theres 2 tv brand that has problem wi...

Unable to connect Ignite TV service to Plasma TV

Hi, I just converted to Ignite TV and the tech dropped off 3 tv boxes. I tried to hook one up to my 15 year old Pioneer Plasma TV (PDP-5060HD) that has its own media receiver box (which is the only way to connect to the TV panel through the Pioneer r...