Resolved! Change WiFi network on Ignite TV cable box
How do I change the WiFi settings on a Rogers Ignite TV cable box? **Labels Added**
How do I change the WiFi settings on a Rogers Ignite TV cable box? **Labels Added**
I just switched to rogers ignite. The one thing I was was I wanted to make sure the switch didn't interfere with working from home. I never had any issues prior to switching. Now, my VPN disconnects and reconnects every few seconds, causing all of my...
Greetings Everyone, Go ahead and call me . , I'm sure that is what I am right now. Switched over to ignite TV with the new Xione box. Connected via ethernet cable. Happy with the wired connection. Is there a way to turn off the wifi? Some ad...
Is it still possible to access advanced settings and for example set the wifi channel on the ignite modem - Technicolor XB6? I have a feeling Rogers has completely disabled the ability to change advanced settings. ***Edited Labels***
Hi, lately I have had to reboot the TV box a number of times each week, sometime multiple times a day. I notice the WiFi icon on the Rogers (Guide, Saved, etc) screen has one "bar" only & I wonder if that is the problem. I also notice the WiFi on my ...
The Xi6-A stb is connected via wifi and has an excellent signal strength. When viewing a channel, the screen will turn black after a couple of hours. There is still.a signal to the tv. The menu still works, and I can access options. Turning the stb/t...
Hi everyone, I have an XB7 modem and Ignite TV and Internet. For several years I have placed my modem (this one and prior my XB6) in Bridge mode and used first an Asus router then a Linksys mesh. Both had IPv6 enabled and I had no issues with Ign...
Within the past month certain, mainly U.S., channels are no longer available via Ignite TV on my desktop PC computer, iPhone or iPad, when I am using my home WiFi network. When I select CBS, NBC, ABC, PBS, FOX etc an error message appears advising me...
Hi everyone, I want to change my Rogers Ignite TV box from Wifi to ethernet connection, does anyone know how this is done? Thanks! ***Added Labels***
I have had terrible wifi issues with my Ignite tv. Always freezes and cuts out. The old style cable boxes never had these issues. I have called into your service techs with no luck resolving the issue. I am sitting here watching a black screen. No pi...
I currently have a setup where I have digital cable, three cable boxes, Home Phone, and cable modem in bridge mode that is connected to a Mesh router. I am being offered Rogers Ignite with three Entertainment boxes for each of the TVs. I am th...
I have some questions about Ignite TV, moving form a Legacy setup. I'm assuming the XI6-A and XI6-T are the newest TV boxes for Ignite TV, and the XB7/XB8 is the latest modem. Can the XB7/XB8 be put into bridge mode with all WiFi disabled? Or is...
This evening, we had a power brown out. All the TVs reconnected to WIFI, without intervention, except one required to select WIFI name and password. What could be the reason that only one TV did not connect automatically? Thanks in advance. *...
Hi, I've upgraded to Ignite TV today /w 1.5 Gb internet and will be receiving my new equipment tomorrow. My house is pre-wired with CAT5E ethernet and all those cables exit in a cabinet in the basement. My current config is 1Gb with a CODA-4582U...
My condo is switching from digital cable (Netbox etc) to Ignite TV May 1st. Is Ignite ALL delivered over the internet? At least now when Rogers (frequent) internet down episodes occur and my Smart TV no longer gives me Netflix, I can go to cable TV...