cancel
Showing results for 
Search instead for 
Did you mean: 

Rogers Hitron CODA-4582 Hardware

Double_K
I'm a Reliable Contributor
2,050 REPLIES 2,050

Re: Rogers Hitron CODA-4582 Hardware

Mayoo
I Plan to Stick Around

How do i get into Modem Trial for this ?

Re: Rogers Hitron CODA-4582 Hardware

14N
I Plan to Stick Around

Modem was updated to .14. did factory reset on both my router (archer C2600) and modem, still the same issue when bridge mode


@AaronMT wrote:

Count me as one who just ran into a DHCP issue in bridge mode with my RT-AC87U which seemed to happen after I manually rebooted the modem. I was able to resolve this issue by factory restoring my CODA-4582.

 

Seemingly at the same time, a new firmware update was available for my Asus RT-AC87U. Applying that, factory restoring the modem, I am now back online.

 

Speeds are still pretty dismal on the .14 firmware update with my Gigabit connection only reaching peak ~700Mbps on Rogers Speedtest.


 

Re: Rogers Hitron CODA-4582 Hardware

tyreman
I Plan to Stick Around

14ms ping    331.34 Mbps     21.14Mbps

 

All good here

 

Everybody using using quality etherent cables I hope

Re: Rogers Hitron CODA-4582 Hardware

stuartcoelho
I've Been Here Awhile

i can never acheive those numbers with the right power levels and correct equipment. tried everything as a technician and speedtest would give me random numbers. 

Re: Rogers Hitron CODA-4582 Hardware

 


@stuartcoelho wrote:

i can never acheive those numbers with the right power levels and correct equipment. tried everything as a technician and speedtest would give me random numbers. 


 

Re: Rogers Hitron CODA-4582 Hardware

FelipeVancim
I Plan to Stick Around

Capture (2).JPG

 

Bridge mode with Synology RT1900AC

 

Re: Rogers Hitron CODA-4582 Hardware

Have something similar

Re: Rogers Hitron CODA-4582 Hardware

bonanza
I Plan to Stick Around

Got upgraded to 2.0.10.17 from .13 and bufferbloat went from F to D level and Quality went from A to C. My speedtests are still giving me 50/15 and WiFi signal on both frequencies are weak

Re: Rogers Hitron CODA-4582 Hardware

Triple_Helix
I Plan to Stick Around

@RogersDave I guess not everyone is getting the .17 or .18 firmware? I'm still on .14 and I sent you all my modem details via PM when I first got it.

 

Hitron CODA Series

Models: CODA-4582
Current production firmware: 2.0.10.14 (and 2.0.10.17-18 targeted to certain customers)
Current trial firmware: Trial program not started
 
Version history
  • 2.0.10.13 (December 13, 2016)
    • Initial release
    • IPv6 disabled

 

  • 2.0.10.14 (December 21, 2016)
    • Improvement to 5 GHz WiFi
    • Fix to guest network

 

  • 2.0.10.17 (December 23, 2016)
    • Fix to handle degraded speeds due to external and/or WiFi interference
    • Improvement to 2.4 GHz WiFi
    • Improvement to 5 GHz WiFi
    • IPv6 handling of SLAAC temporary and secure addresses*
    • IPv6 ICMP improvement*

 

  • 2.0.10.18 (December 23, 2016)
    • Improvement to LAN switch port autonegociation protocol

 

    *IPv6 remains disabled on this modem until all modems are upgraded

 

 

TIA,

 

Daniel Smiley Wink

Re: Rogers Hitron CODA-4582 Hardware

@Triple_Helix please see the following post;

 

http://communityforums.rogers.com/t5/forums/forumtopicpage/board-id/Getting_connected/message-id/388...

 

At the present time, versions beyond .14 are targeted installations, so, you might not see any update beyond your current firmware version until a network wide release.  That all depends on whether or not your modem is seen to be experiencing any of the issues that the targeted releases are aiming to resolve.  As the saying goes, if it ain't broken, don't fix it. 



Re: Rogers Hitron CODA-4582 Hardware

fffvde
I've Been Around

Wish I hadn't upgraded to this modem. I was consistently getting 700+ mbps download speeds using the previous modem with my Gigabit service, now the max I'm getting is around 400, and with the top port over ethernet it looks like its limited to 100mbps. Currently on the 2.0.10.14 firmware. 

Re: Rogers Hitron CODA-4582 Hardware

Akki
I'm Here A Lot

Same here,.. for almost 2 weeks i am getting up to 100 on 1gb service. This is completely unconvinient.

Re: Rogers Hitron CODA-4582 Hardware

RyzenFX
I'm a Reliable Contributor

@Akki @fffvde

 

If you guys are on the 2.0.10.14 firmware and receiving terrible speeds I would reccomend private messaging  @RogersDave to send you firmware 2.0.10.18 as it includes protection from interference that could be causing the very low download speeds that you are experiencing. It also provides enhancements to the 2.4/5 GHz bands and includes a fix for the autonegociation problem on the ethernet port 1. 

 

Also in the PM I would suggest sending your modem's MAC Address which is located behind the modem so that he can run further tests to find out what is causing the slow download speeds.

Re: Rogers Hitron CODA-4582 Hardware

Akki
I'm Here A Lot
Thanks eddie!
pm sent

Re: Rogers Hitron CODA-4582 Hardware

Breadwinka
I Plan to Stick Around

I just got updated to 2.0.10.19

Re: Rogers Hitron CODA-4582 Hardware

bhaskarp
I Plan to Stick Around

gigabit slow internet speeds (CODA-4582)

 

http://www.speedtest.net/result/5921169153

 

Technician discovered there is signal noise in the area (something to do with channel 2), a maintenance team was then dispatched. The maintenance work has been completed but there is no change.

 

Any advice?

 

Downstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Signal noise ratio (dB)
1 615000000 256QAM 6.200 35 35.780
2 363000000 256QAM 0.200 10 35.595
3 369000000 256QAM 0.400 11 35.595
4 375000000 256QAM 0.800 12 35.595
5 381000000 256QAM 0.800 13 35.595
6 387000000 256QAM 1.300 14 35.595
7 393000000 256QAM 1.700 15 35.595
8 399000000 256QAM 2.000 16 35.595
9 405000000 256QAM 2.000 17 35.595
10 411000000 256QAM 2.100 18 35.780
11 417000000 256QAM 2.500 19 35.780
12 423000000 256QAM 2.400 20 35.595
13 429000000 256QAM 3.400 21 36.387
14 435000000 256QAM 3.300 22 35.780
15 441000000 256QAM 3.400 23 36.610
16 447000000 256QAM 3.600 24 36.387
17 555000000 256QAM 4.900 25 35.780
18 561000000 256QAM 4.800 26 35.780
19 567000000 256QAM 4.700 27 35.595
20 573000000 256QAM 4.700 28 35.595
21 579000000 256QAM 4.300 29 35.780
22 585000000 256QAM 4.400 30 35.595
23 591000000 256QAM 4.900 31 35.595
24 597000000 256QAM 5.500 32 35.780
25 603000000 256QAM 5.900 33 35.780
26 609000000 256QAM 6.100 34 35.780
27 357000000 256QAM 0.300 9 35.780
28 621000000 256QAM 6.400 36 35.780
29 633000000 256QAM 7.100 37 36.610
30 639000000 256QAM 7.300 38 36.387
31 645000000 256QAM 7.500 39 36.387
32 651000000 256QAM 7.700 40 36.387
OFDM Downstream Overview
Receiver FFT type Subcarr 0 Frequency(MHz) PLC locked NCP locked MDC1 locked PLC power(dBmv)
0 NA NA NO NO NO NA
1 NA NA NO NO NO NA
Upstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Bandwidth
1 23700000 ATDMA - 64QAM 37.500 2 6400000
2 38596000 ATDMA - 64QAM 42.000 3 3200000
3 30596000 ATDMA - 64QAM 40.250 1 6400000
OFDM/OFDMA Overview
Channel Index State lin Digital Att Digital Att BW (sc's*fft) Report Power Report Power1_6 FFT Size
0 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
1 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K

Re: Rogers Hitron CODA-4582 Hardware

99bobster99
I Plan to Stick Around

Is there a way to edit the CODA-4582 "backup" cfg file? I liked the fact that on my old DLink router the backup file was not encrypted and just a standard txt file. It was very easy to edit and upload any changes.

Re: Rogers Hitron CODA-4582 Hardware

clenh
I Plan to Stick Around

I hoping to get the latest firmware soon.    Sent my request earlier today to @RogersDave

 

Re: Rogers Hitron CODA-4582 Hardware

Alex4161
I'm a Reliable Contributor

Rogers Hitron CODA-4582 - Any documentation about what the light colours/front panel info does?

 

Would anyone have the operating manual for the Hitron CODA-4582 and can tell me what the colour of the lights and any other troubleshooting tips if some lights are flashing etc?  I want to help my friend setup his modem and am checking his network.  I just want to be armed with info in case we encounter any issues.

 

Also, perhaps we should start a troubleshooting thread specific to the Hitron CODA-4582 and have it focused or read only so that it doesn't snowball into something off topic.  

 

Thanks

Re: Rogers Hitron CODA-4582 Hardware

RyzenFX
I'm a Reliable Contributor

To make sure that his network is online and running the upload and download indicator lights should be blue. In some cases if your friend is connected to DOCSIS 3.1 the download indicator light would be purple and the upload indicator light would remain blue, but there's nothing wrong with that.

 

Additionally the indicator light should be solid green. This means that your friend is connected to the Internet. Other than that the rest of the indicator lights should be self-explanatory. 

 

Also, if you are connected to the modem via ethernet for the first time and get abysmal speeds, restart the computer and run another speed test. If you are still getting abysmal speeds then try restarting the modem.

 

If you can, also check the downstream and upstream signal strengths incase there is anything bottlenecking your friend's speeds. Normally the downstream signal stength should be between 10 dBmV and -10 dBmV. The upstream signal strengths should be between 35 and 52 dBmV. 

Re: Rogers Hitron CODA-4582 Hardware

bonanza
I Plan to Stick Around
So assuming both lights are blue, it means only DOCSIS 3.0 is available correct? Is that a bad thing?