Is DLNA disabled on this modem? I see on the Hitron website under features it lists "Integrated DLNA Media Server with support for video, audio and image serving" but it doesn't seem to be enabled and I see no option to enable it. Am I doing something wrong? It works fine if i put it in Bridge mode and use my previous router.
Had gigabit installed on Tuesday. Upgraded from 250u which I never had any problems with, always 310ish/20 day and night since having it installed in the spring. Gigabit is a different story. Speeds all over the place, most of the time its below 200 down and 1-2 up. I'm testing with a direct connection to the modem, fresh reboot bypassing my network equipment and it makes no difference. On the 19 firmware.
Saturday night at midnight, tested on the rogers speed test site:
|Port ID||Frequency (MHz)||Modulation||Signal strength (dBmV)||Channel ID||Signal noise ratio (dB)|
|Receiver||FFT type||Subcarr 0 Frequency(MHz)||PLC locked||NCP locked||MDC1 locked||PLC power(dBmv)|
|Port ID||Frequency (MHz)||Modulation||Signal strength (dBmV)||Channel ID||Bandwidth|
|1||30596000||ATDMA - 16QAM||34.750||1||6400000|
|2||38596000||ATDMA - 16QAM||37.500||3||3200000|
|3||23700000||ATDMA - 16QAM||34.750||2||6400000|
|Channel Index||State||lin Digital Att||Digital Att||BW (sc's*fft)||Report Power||Report Power1_6||FFT Size|
Any insight will be appreciated.
Same for me. Windows 10 pcs can't get an ip from the modem.
Couple of things you might want to try based on your last post (you also may want to post up your steps you took with the previous rep).
have you tried putting your windows machines into safe mode?
have you tried unplugging the cable from the working unit like your Apple TV and plugged it in to your laptop?
are your hardwired connections all coming from the CODA-4582 modem or do you split off using a non-managed network hub?
Its been 3 weeks and rogers still cant fix these speed issues customers are having.
Then they wonder why everyone hates them, were paying customers for something were not getting, your commercial are a joke when they promote fast and reliable internet.
Tried of swithing out my modem and calling tech support which are clueless fools.
When my contract is up im swiching my service.
Latest Rogers screwup on the CODA-4582!
I started having strange computer names showing up in my windows 10 explorer network. I logged into the Hitron-4582 Status->Wireless->Wireless Clients to see if I could see what these computers were. This feature that had worked the day before now crashes the Hitron GUI and makes you log back in and you never get the results. I checked the DOCSIS logs and they performed a software download last night which took 18 mins and updated the firmware. The only difference I can see other than breaking this very important status feature is they added Basic->Gateway Function-> SIP ALG function which is for VOIP support. The version is now 184.108.40.206, no idea what it was before.
Rogers Hi-speed support confirmed trying to use this status feature kicks you out of the gui and you have to log back in. He has esalated the case. He said there is no way to roll the modem firmware back and to check it again in a few days to see if it is still broken and then call back in if it is.
Well, I don't feel very secure with my network being exposed and other peoples computer showing up. Time to see tomorrow if I can get an old Hitron-CNG3 Rocket modem back.
How does one go about getting this modem if you already have a Hitron CGN3ACSMR? The 5GHz band keeps dropping on mine and is always weaker in strength, regardless of what channel I choose. The 2.4GHz band works perfectly fine, though.
Do I have to call in to Rogers first or could I just take my old modem to a Rogers Store and get this new model?
Or should I not bother since this modem appears to have more issues that have to be dealt with?