We are currently offering our users an exclusive opportunity to participate in an upcoming trial of the new firmware for our Rocket Wi-Fi Modem (CGN3ACR, CGN3AMR and CGN3ACSMR) and Rocket Gigabit Wi-Fi Modem (CGN3552 and CODA-4582). For details of this program, please see this thread.
This thread will be used for feedback regarding the firmware. We've invited @RogersSergio, @RogersSyd & @RogersBob from our Networking team to participate in this thread. Your feedback is very valuable and will be used to enhance the firmware before it is released publicly.
Thank you for your continued feedback and support.
I factory reset and only channel 1 and 7 came back but 12 is gone as well now.
Looks like I'll have to get it swapped.
Edit: Also noticed I'm back in 26T2 after the reset.
Did a couple of tests after rebooting the unit. Jitter is significantly down compared to the previous firmware. Upstream bufferbloat is also improved (I don't think it went over 10ms during the test vs 600ms on the previous firmware). Downstream bufferbloat has not improved.
Can you post the details of the DSL reports test so I can see the current bufferbloat on this firmware for CODA.
Here is an example of mine running on the CGN3ACSMR on the .27 firwware.
Yeah, there's certainly some loss in speed with this new firmware. Upload is definitely down in my case. Bufferbloat wise, the old CGN3AMR had less bufferbloat on the latest firmware. When it comes to games though, I get way better latencies with this modem than my older CGN3AMR and I haven't had any disconnects since I got it yersterday.
I got a new Hitron router recently and I'm having issues with Chromecast again. Do I need a new firmware? My router model is CODA-4582 and I believe the firmware version is 184.108.40.206. Thanks
@Bruno1 Give it a try. The latest firmware for the coda modem seems to have solved many issues for many people. In my case, My ping times have slightly improved form .26T2, and connection persistency has also improved compared to the old firmware.
I have software version 220.127.116.11 on my CODA-4582. When I attempted to connect to the guest wifi from my iPhone 6s, I initially rec'd the message "Only allow DHCP client to use this wireless" (after entering the password and clicking on the Access Internet button). I tried two more times and finally rec'd the "Success" message.
I tried to replicate this behaviour by forgetting the network and re-connecting but no joy. It seems to work smoothly now.
I did a reset and was back to .26, today I noticed .27 was pushed back to me but without the slower speeds that I encountered on .27 the first time.
I ran a speed test on dslreports and I am getting great speeds . For the first time I'm getting full 50 mbps upload and got A's for both quality and bufferbloat.
That's interesting. Did you reset the modem through the web GUI? Are you in a DOCSIS 3.1 enabled area?
You can try .27 again . The reason I reset it in the first place was my speeds were around 5 mbps down and 1.5 mbps up , I didn't know at the time but there was a issue in my neighborhood.
.27 was pushed back to me the very next day without me having to ask for it, and it was much better so I thought Mabey Rogers Dave tweeked the firmware a bit.
Yeah, I sent a pm to @RogersDave to update my modem back to firmware .27 a couple of days ago. Havn't heard from him. .26T2 is pretty bad compared to .27.
Good morning Community,
Just a quick note that due to a fat finger problem this morning (100% my fault), I deleted all my private messages.
If you sent me something and you are still expecting an answer, reach out to me again.
Sorry for that.