There's been a slew of threads lately on MoCA and I have my own questions on setup... I've currently got a CODA-4582 (which supports MoCA 2.0) but I prefer to use my own router and put the modem in bridge mode. My understanding is that in bridge mo...
Hello Community, We are currently offering our users an exclusive opportunity to participate in an upcoming trial of the new firmware for our Rocket Wi-Fi Modem (CGN3ACR, CGN3AMR and CGN3ACSMR) and Rocket Gigabit Wi-Fi Modem (CGN3552 and CODA-4582)...
I want to be able to stream to a Chromecast/Sonos from a PC, but it doesn't seem to be working as the PC is using wired internet and the Chromecast/Sonos use WiFi. While looking for a solution but it seems like my current router (Hitron CODA-4582 pro...
Been running the device in bridge mode for quite some time now and was able to access it just fine at the 192.168.100.1 address to check logs. LAN is 192.168.1.0/24. Running pfSense and no changes have been made in months but all of a sudden a few ...
I recently upgraded to the Gigabit internet speed and got the new modem. On my old modem (CGN3), I was able to plug both my hard drives and see them under the Admin -> USB Storage. I was then able to map a drive letter to them from all my computers ...
I have been experiencing intermittent disconnects of internet service for a few minutes at a time and have replaced the CODA-4582U with no improvement. The modem is is bridged mode and after reading some of the other posts I believe there may be a si...
Hi,I have a Hitron 4582u router/modem in my house as the main device. Now, I want to connect another access point to this device over the exiting coax cables. I know, I need a MOCA adapter for the connection. My question is: is it possible to use ano...
I am on the 500mbps internet service tier. My internet connection was frequently dropping for 5-10 seconds, about 1-3 times a day. Download/Upload speed was also dropping down to 10mbps across all devices, with high latency. I replaced the cable mo...
Hello - We recently switched our accounts (multiple homes) from the legacy rogers internet service which leveraged the white tower modems (Hitron) to the new ignite internet service (XB7 modem). After the switch our cameras which are linked to a POE ...
Hi, I recently switched to Rogers gigabit from Bell. I have a CODA-4582 modem, firmware 2.0.10.34T6. I frequently work from home connecting to work over a Cisco VPN. Everything is much slower compared to when I was on Bell and compared to a friend us...
Hello,I’ve recently got the modem replaced from the cgn3 with the coda 4582u, cgn3 modem got bricked. Anyways, whenever the internet is in use (on wifi or Ethernet connection) it disrupts the cable tv (distorts picture and lose audio).Also note that ...
Trying to create a separate SSID to contain traffic from different devices on the modem but as in many instructions - there is no option to create a secondary SSID under Multiple SSIDs in the Wireless section. Seems the firmware still remains similar...
So I'm using the older Hitron CODA modem in bridge mode. It has never given me any problems in the years I have owned it. Maybe 5 times it went offline and that was a service outage. It all runs into my Ubiquiti setup that has a USG and a UAP-AC-PR...
I've been dealing with massive DHCP issues in the past week, using the CODA 4582 router, most new devices I connect have issues where I can't reach certain sites, my xbox gives me a DHCP error, and my router stopped working with a DHCP error This goe...
I have a CODA-4582 modem, running Dual Router mode and have been using manual IPv4 and IPv6 DNS entries for a while now. I noticed sometime in the past week or two that my modem no longer shows IPv6 DNS1 and DNS2, only IPv4 DNS1 and DNS2. I've r...
Hello, I'm going crazy here. I've been troubleshooting for days and have isolated the issue with my CODA-4582 modem/router (It's currently in Residential Gateway mode). I'm not exaggerating about the day(s) of troubleshooting, so forgive me if I ra...
Over the last week or so our household has been dealing with extremely sluggish internet performance or no ability to connect to the internet via WiFi. We have a Hitron CODA-4582U modem and live in Etobicoke and before this had no problems at all wi...
I was experiencing some Internet connection issues last couple weeks, so a Roger technician came and replaced my old Hitron Coda-4582 this morning. From the Status page of the new modem, it shows Hardware Version: 1A, Software Version: 7.1.1.37. ...
My internet went down early morning, again. This is the 2nd time it went down after a 3rd tech visit last month. After it came back up on its own after 1 HOUR down time, I can now no longer access the modem's webpage. 192.168.100.1 fails to load, e...
Here is my setup.Rogers (500U) —> Hitron CODA-4582U —> Cisco RV130W —> Computer (Wired)Cisco RV130W is a wireless-N VPN router with firewall.Both the Hitron and Cisco are almost at factory defaults. I’ve changed only the passwords and setup the w...