Internet
Got questions about your modem, router, speeds or WiFi?
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Rogers & PlayStation Issue

Currently on Ignite 1 Gbps plan. Modem is an XB7 and I use that equipment (don't have my own third party router). Seems that since the end of January I've been having issues connecting to online play with either my PS4 or PS5. Every time I have to lo...

Tad by I'm here a lot
  • 4573 Views
  • 16 replies
  • 0 likes

New 1.5G tier with Usenet problems

Just upgraded from the Hitron modem, been on the 1 gig tier for years with no problems.I have my usenet software set for 50 connections and it would saturate the connection and download all day at about 110 MB/s.Got the XB7 and plugged into the 2.5 g...

Jelllo by I plan to stick around
  • 5096 Views
  • 30 replies
  • 0 likes

FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

Hello Community,   We are currently offering our users an exclusive opportunity to participate in an upcoming trial of the new firmware for our Rocket Wi-Fi Modem (CGN3ACR, CGN3AMR and CGN3ACSMR) and Rocket Gigabit Wi-Fi Modem (CGN3552 and CODA-4582)...

RogersMargaret by Community Manager (Retired)
  • 560436 Views
  • 4921 replies
  • 8 likes

No-IP Dynamic DNS is no longer Supported in Rogers Modems?!

Greetings,   Just noticed my modem was rebooted by itself and I think it got updated its software.   Hardware Version 2ASoftware Version 7.1.1.32System Time 2020-09-16 21:53:04Time Zone UTC-05:00 Eastern Time(US & Canada)LAN Up Time 000 day 00h:02m:5...

ansred by I plan to stick around
  • 4789 Views
  • 6 replies
  • 0 likes

XB6 Modem Settings/Requests/Firmware Discussion

Hey guys, I noticed we don't have a dedicated thread on the XB6 modem like the Hitrons. I'm making this thread so we can talk about the various settings and requests for future changes through firmware updates. For me the biggest issues with the mode...

gp-se by I'm an advisor
  • 30423 Views
  • 192 replies
  • 4 likes

Resolved! Rogers Ignite modem latest firmware version

I understand that I can't manually update Rogers Ignite modem firmware, but could someone tell me what the latest version number is?  Mine is currently stating 7.3.2.0.91.   *Added Labels*

Anyone having issues with IoT devices after the weekend?

I have a smart AC unit and it was working just fine until the weekend. I have the ignite modem and I suspect there was a firmware update over the weekend as I had to reboot a few times. The AC unit was working fine where I could control it from my ph...

horrible speeds over VPN

Hi, I recently switched to Rogers gigabit from Bell. I have a CODA-4582 modem, firmware 2.0.10.34T6. I frequently work from home connecting to work over a Cisco VPN. Everything is much slower compared to when I was on Bell and compared to a friend us...

hoek by I plan to stick around
  • 14601 Views
  • 66 replies
  • 0 likes

CODA-4582 IPv6 DNS1 and DNS2 disappeared

I have a CODA-4582 modem, running Dual Router mode and have been using manual IPv4 and IPv6 DNS entries for a while now.  I noticed sometime in the past week or two that my modem no longer shows IPv6 DNS1 and DNS2, only IPv4 DNS1 and DNS2.     I've r...

ianafamily by I've been here awhile
  • 6675 Views
  • 21 replies
  • 0 likes

Low signal levels with CODA-4582U in Etobicoke

We have a CODA-4582U modem in bridge mode with Gigabit Internet service.  For the past few weeks we have been seeing reduced download speeds, higher latency and dropped packets.  When I look at the modem signals I think I know why.  The signals look ...

jn00 by I plan to stick around
  • 769 Views
  • 1 replies
  • 0 likes

Hitron CODA-4582 Firmware Update?

My old Hitron CODA-4582 was shutting down and dropping wifi.   I went through tech support and ended up with a new Hitron CODA-4582.  It will not connect to the service.  I can hook up the old one and it will connect without issue but wifi not workin...

Resolved! How to update my Hitron Firmware

Hi I have never updated my firmware ever where can I see if there is an update to download ?  Model Name: CODA-4582 Firmware Version 0.6.14.17   *** Edited Labels***

Bodycount by I've been here awhile
  • 10710 Views
  • 5 replies
  • 0 likes

Resolved! Does my signal look ok?

Hi, Can some please tell me if my signals looks ok. CODA with 7.1.1.37 on 500/20 profile.   I compare them with my friend who uses CODA with the same firmware on 1gb/30 profile.   he has much better bufferbloat stats then me.   Under OFDM Downstre...

amd7674 by I plan to stick around
  • 3286 Views
  • 17 replies
  • 0 likes

Ignite WiFi Pods Offline

Connection Point Unknown: So I have had a couple of Pods with my XB6 for months and they have worked well, with different devices connecting to either Gateway or Pods, etc.  This morning, completely out of the blue, the pods seem to be wonky (and hav...

Circus_boi by I plan to stick around
  • 1806 Views
  • 3 replies
  • 0 likes

Resolved! change Hitron admin password

I would like to change my Hitron Model CGN3ACSMR Modem admin password.  I can log in with the cusadmin username and current password but when I go to administration settings and try to change it and type in the old password in the box it comes back, ...

obs by I've been here awhile
  • 20254 Views
  • 17 replies
  • 0 likes

How stop unwanted Ignite modem updates?

Hi, I'm having a really bad issue with my ignite internet. I noticed that my modem always updates while I'm using, sometimes I'm gaming or streaming and out of nowhere my internet goes down, the lights on my modem goes green... starts to blink... the...

Resolved! CODA Firmware Upgrade

It's been 5 days sinxe I have had Rogers install and the modem is still running firmware 2.0.10.33T3   Is there a way to force an update or how long does it take to automatically update?       ***Added Labels***  

hansm0leman by I plan to stick around
  • 13568 Views
  • 13 replies
  • 0 likes

Bridged CODA-4582U Modem WAN Port 1 keeps dropping to 100Mbps

Hi everyone!   Would really appreciate some help, I'm starting to pull my hair out.   Set-up: CODA4582 (Bridged) >Ethernet> EERO Pro 6 gateway (meshed with 2 other Pro 6 in wireless mode) > Gigabit switch > lots of stuff   Problem: I have Gigabit Int...

the_big_v by I've been around
  • 1975 Views
  • 2 replies
  • 0 likes
Labels