05-31-2016 08:42 AM - last edited on 03-14-2018 04:23 PM by RogersRoland
We are currently offering our users an exclusive opportunity to participate in an upcoming trial of the new firmware for our Rocket Wi-Fi Modem (CGN3ACR, CGN3AMR and CGN3ACSMR) and Rocket Gigabit Wi-Fi Modem (CGN3552 and CODA-4582). For details of this program, please see this thread.
This thread will be used for feedback regarding the firmware. We've invited @RogersSergio, @RogersSyd & @RogersBob from our Networking team to participate in this thread. Your feedback is very valuable and will be used to enhance the firmware before it is released publicly.
Thank you for your continued feedback and support.
05-13-2021 01:41 PM - edited 05-13-2021 01:46 PM
05-13-2021 01:44 PM - edited 05-13-2021 01:44 PM
05-13-2021 02:04 PM
Netgear R7000 running XWRT-Vortex (ASUSWRT-MERLIN)
05-13-2021 02:21 PM
RT-AC86U - Current Version : 184.108.40.206.386_42643-g16dc577
I've been running this firmware for a while, since it was released. Router uptime is 14 days.
05-13-2021 02:23 PM
Hardware Version 1A
Router - Asus AC68U
firmware - 220.127.116.11.386_41634
However, in my opinion it might not be a router issue. I had directly connected my laptop with a ethernet wire to the modem and it had the same result. Some software issue in the modem more likely.
05-13-2021 02:30 PM
05-13-2021 02:34 PM
05-13-2021 03:11 PM
05-13-2021 03:21 PM - edited 05-13-2021 03:26 PM
Hardware Version 2A
Firmware Version 18.104.22.168
Running in Bridge mode with an Asus RT-AX86U behind it with Merlin's Asuswrt loaded.
Merlin's Asuswrt firmware version: 386.2_4 which is the latest release version for all Merlin supported routers
Speedtest result: 940-943 Mb/s down 32.8 Mb.s up
All currently supported Asus routers will/should be running a 386.x firmware version for stock or Merlin versions.
@RogersIan are you able to do a data dump from the modem to look for a before and after difference in the config data, that is, when the modems are running at their assigned data rates, and then when the modems drop to 10 Mb/s. I wonder if there are any differences in the config data although I wouldn't expect to see any.
05-13-2021 03:28 PM
05-13-2021 04:16 PM
Seems like U-NII-1 and U-NII-3 power levels on the 5Ghz band are back to normal. Also, toggling the channels on 5Ghz does not turn the radio off/on, anymore. I will do some more testing for consistency.
05-13-2021 06:48 PM - edited 05-13-2021 06:59 PM
@RogersIan - After the reboot this morning, it was fine. Just checked again now and back to 10/10 instead of 250/20
05-13-2021 06:57 PM - edited 05-13-2021 07:00 PM
05-13-2021 06:57 PM - edited 05-13-2021 07:01 PM
Speed at Prime Time. Gigabit Plan.
05-13-2021 07:19 PM
@zardoz99 it will keep going back to 10/10.
Only way for me was to downgrade firmware to production version
05-13-2021 07:34 PM
05-13-2021 07:47 PM
Help Please !!!
I am in the exact same boat. Experiencing 10/10. At first thought it was my router (Linksys MX5300) through bridge from from Coda 4582. Only started past 2 days which coincides with .37 release.
How do I get off .37 and back to previous stable firmware !!!
05-13-2021 09:03 PM
Please add me as well to the list:
Latest Firmware: 22.214.171.124251
05-13-2021 10:15 PM - edited 05-13-2021 10:18 PM
Initial performance on .37 was good, however I am now experiencing some speed tests being limited to 10mbps down/10mbps up through the two devices that are hardwired to my modem in bridge mode. I have two devices connected to the modem: my PC and router. Speed tests through both show the same limitation. Keep in mind that the speed tests does not always yield the 10/10 result because it reverts to the speeds I pay for after some time and reverts back to the limitation and goes back to the speeds I pay for and so on (main point: the issue is that it cycles between full speed I pay for and the 10/10 limitation very often).
Side note: I noticed when the 10/10 limitation is effect I am unable to hear/transmit voice data when in a group call such as in Discord. Network stats return a ping of 5000 and 100% packet loss. Also note that a reboot does not fix the issue.
Let me know if you need any more information.
05-13-2021 10:32 PM - edited 05-13-2021 10:33 PM
05-13-2021 10:36 PM