The 36T4 firmware is the latest test code (current production code is 34T6... i have made the same mistake a few times today). I confirmed that you were eligible to receive the upgrade and pushed the code.
The issues you are describing of having to reboot your device was that after the firmware push at ~6:40PM today? which means it occurred on the new code... or was it before the upgrade which means we need to keep an eye on things to see if things have improved?
Hey Sergio, I would be pleased to test the latest CODA firmware whenever my area is hit with a CMTS upgrade.
still on 184.108.40.206T6
Guys the Home Hub 3000 sounds great, but Bell doesnt support Port Forwarding, the modem physically blocks it even if you use your own router, and also they dont have IPv6 on Fibe... so yea theres that.....
Bell's FTTH service: There is no port forward restrictions when the HH3000 is removed from the chain and the Fiber Cable that Bell provides is connected to your switch/router. The restrictions only apply when using the HH3000 in the chain, when the HH3000 is removed from the chain you're home free.
YOU sure are a BRUTE for punishment. You could solve the bulk of your issues by getting your own Router and place the CODA in BRIDGE mode. The CODA, as a GATEWAY device, is NOT designed for the kind of networking you have in place. IMO it will never be engineered for that kind of usage. IN BRIDGE mode the CODA using 36T2 is very functional.
Please add me to the list of those wanting to try out 36T2, or whatever is the latest firmware, for the CODA 4582.
The Race is on!
Bell to bring 1.5 gigabit speeds to Ontario this month Bell will also bring 1.5 Gigabit Internet service to the Atlantic provinces, Quebec and Manitoba.
Bell will increase speed to 1.5 down/1.5 up later this year.
The national telecom had previously said that it wants to bring 5Gbps speeds by next year and ultimately more than 40Gbps in the future.
This is insane, I really hope Rogers has a plan to compete with Bell in the near future because they're quiet about it on the other hand Bell is going public about it.
The race is on and we really need to get that DOCSIS 3.1 upload asap, to at least catch up a little on Bell.
Docsis 3.1 on the upload side is still not going to give you a fully Synchronous connection like what bell offers.
My money says at best you will see 1000/100 on the gigabit connection. There is a reason cable labs and created a full duplex spec to allow synchronous on cable. So the question is will rogers eventually go Full duplex.
And I seen westpoint talking about bell offering 2Gbps connections in the future I hope he knows that will require brand new nics in all your PC's to handle that speed aswell as an I/O system that can keep up.
From what Bell's CEO said in Q1 their goal is 5gbps by middle of 2019. Would you not still benefit if the modem supports 5 gigs across all 4 ports? Even if you cant push it all on one port there should be some performance increase? Also the price of 10 gig nic's have come down since Aquantia launched their more value oriented chips. Asus sells one for like $100.