A little rant, but more so, reaching out for some WiFi help/advice.....
Started with Ignite bundle 5/7 ago and running 1gbs; express set-up went smooth, added devices to the Gen2 gateway with ease - including my Canon laser Printer, its listed as a device on my network. Or so I thought, the printer seems to be on the network but will not print from cell phones x2 or laptops x2 with using wifi "no airprint printers found". Before Ignite, all was good using the legacy set-up.
I have tried everything suggested by Canon, even information from this community forum. Still no luck. Last few nights, tried to get some help from Ignite Tech support - Road Block!!. Tele support waits >2hrs; via text - agent minimizing the situation, confrontational language, and essentially indicated my situation does not pertain to Rogers products or services, so bugger- off and speak with Canon.
Kindda feel let down by a company who offers a deceptive gold standard Ignite WiFi Promise to bundle customers. Then asks us to contact an Ignite Tech expert to chat if the promise is not kept - I am unable to wait for hours nor do I want to feel invalidated by some joe typing away on a keyboard.
Any advice, help, suggestions are seriously welcome at this point. Perhaps Rogers reviews this content, if so, thanks for the community forum registration badge. leonjulie.
*** Edited Labels/Title ***
@Pauly Okay, but apparently everything did work before the switch to Ignite Internet, so it looks like something in the Ignite Gateway is preventing Bonjour from working properly. Looks like the key to getting things working is to enable Zero Config in the Device Discovery options.
(Again, I can't test this configuration and I am currently running in Bridge Mode.)
I guess it would be good to find out WHICH modem they specifically have.
the XB6 or 7??
As I have the 6, and I know that airprint for me, DOES work.
We are able to print from my wifes Mac and our iphones to our HP printer.
THOUGH.. the my HP is connected WIRED to the network, but the other devices are wired.
So I wonder if thats where part of the issue is?
I do have a wireless only HP printer as well, and I know I can print to it from a normal desktop. but I generally dont always have it on, so not sure if airprint works from it.
All in all, when switching from the one service to another, did the wireless network name stay the same? And the device just re attached on its own?
All in all, if it hasnt been done already, I would go full the full reset and re connect of the machine to the network again and see if that resolves anything.
@leonjulie Just to add to @Gdkitty 's comment, the Ignite gateways assign a different default IP address range than the Hitron modems. If your printer or your devices' printer setup was configured in such a way that it was tied to that 192.168.xxx.xxx address range that the Hitron modem would have assigned, the printer may still connect to WiFi but none of the devices on the network would be able to connect to it. If this sounds like it could be your problem, then the easiest fix will may be to reset reset/reconnect the printer to the network... and possibly also delete and redo the printer setup on your other devices if they still cannot print.
However, if your Canon printer is not able to connect (or stay connected) to WiFi at all, then that is a different problem.
We really need to know what is and what is not working on your network before we can provide you with any useful advice on how to get everything back into a good working state again.
-G-, if your in Bridge mode, then the rogers modem is not providing any Gateway routing of your home network its done via the third party router. if t his is the case, its highly unlikely to be a rogers issue. can you confirm this?
Everything is working fine on my network. However, I am running on my own networking gear and have Bridge Mode enabled on my XB6. I also do not currently have any printers that support AirPrint so I cannot test whether or not that works with my XB6 in gateway mode either.
I was basically just trying to say that I cannot test whether or not AirPrint works in a typical Ignite Internet setup or whether enabling Zero Config on the Ignite Gateway would be required to get AirPrint working.
I also did not want to propose making any drastic changes without knowing exactly what is/is not working with @leonjulie 's network. I assumed that having already consulted with the Rogers and Canon tech support groups, that the basic things would have already been checked/reconfigured and that the Ignite gateway was causing some weird problems in its default configuration.
I was dealing with this exact same issue. Spoke to tech support, they tried various things and nothing worked. Then, I had an idea: I asked for a Wi-Fi Pod, which has Ethernet ports. They sent one over at no charge. I connected my printer to the Pod via ethernet cable and now it's working perfectly. Not only that, but the Pod boosted the Wi-Fi connection in my home office and it's stronger. Whoever is still dealing with this issue, I recommend you do that.
I switched to Ignite Wifi with no issues other than my Epson Workforce 545 printer will not print. I have had two lengthy sessions with Rogers tech support on the phone and one came in person. No one could solve this. The printer is on line. When I go to print, the printer shows up as ready, but the document cannot be printed. We have tried a multitude of solutions and everyone is stumped. So do I buy a new printer? Do I need to check compatibility with Ignite Wifi or will most new printers connect with no issues? My modem is an XB7. Thanks, Greg
I can relate. I switched to Ignite bundle recently and have spent many frustrating hours seeking set up support . My old HP Envy 4522 worked wirelessly for a short time after a super Rogers techie guided me through my printers wireless set up system. I haven't needed the printer for several days and now can't get it to connect to our network.
The thought of playing the waiting game on the phone or trying to communicate with Chat Time Anna makes me crazy. I'm afraid that trying to solve the printer mystery on my own may disrupt the TV , Internet and phone. HEADACHE !!!