I am trying to connect to my shares on Windows 10 Home PC via Oppo-BDP-103 using Oppo Media control app. All worked before change to Rogers Ignite and CGM4141 gateway. Does this device not support Samba SMB1 protocol?
Called Rogers and an automated message informed me that in my area (last 3 chars of postal code) there are doing maintenance and that I should check Rogers website maintenance page for status and updates. Would appreciate if anyone can provide the ...
Hello Everyone, After doing a factory reset of my Ignite Modem (I was having issues with the Rogers Ignite TV service), I see that for 5 Ghz, it only is using Channel 44. Why is it not working with the high channels that are spec'd to handle highe...
I enabled the guest WiFi network on this Hitron CODA-4582 modem/router but the password security option doesn't seem to work. The guest network is always unsecured. It's that expected behaviour? My guess is no, because this page seems to suggest the ...
Hello, I'm curious if any other Twitch broadcasters are experiencing this issue with Rogers. I get 250 down / 20 up consistently and my upload to Twitch will start to drop frames/packets if I exceed around 3000 bps, which is not even a 1/4 of my u...
Announced 13-December-2016 by @RogersDave http://communityforums.rogers.com/t5/forums/forumtopicpage/board-id/Getting_connected/message-id/37931#M37931 Credit to @Hybrid_Noodle Hitron website: http://www.hitron-americas.com/product/coda-4582/ Data...
Hi there, My phone and laptop cannot "see" my router. They both can see other connections in the building. I've gone into the settings, checked to see if the primary SSID was hidden. I know the settings on the router are set to factory settings (othe...
I have a hitron route through Rogers and they sent me a eero router to boost wifi. I had to bridge the networks by disabling residential gateway on hitron. How do I access eero to turn on the ipv6? I type in the standard ip and it takes me to hitron ...
I have a work computer that requires a hardwired Ethernet connection to my router, which needs connection to the wall/Ethernet port in the wall to run. My new office space does not have an Ethernet port, only the master bedroom does and I don’t want ...
I am dropping Rogers Internet because of unbelievably bad tech support over a 3-week period. I have already installed Bell Internet, and I kept Rogers running while I switch all the WiFi appliances over. Can I run Ignite over Bell WiFi? Or do I h...
I've been running various Rogers modems in bridge mode since at least 2005, and have always used Cisco gear as my router/firewall. Most recently I have been running a Cisco 921-4P router connected to a Hitron CGN3 in bridge mode. Service was 150u n...
I usually download different *nix based OS (ISO image) for testing and scripting... Since I upgraded to ignite I've been getting file errors on all ISO image. I do understand there is no error correcting on the UDP protocol but I never had this much ...
My internet was blocked twice for apparently having a virus I was not aware of. The second time we called the tech support they told us to do the same procedure as the first using the anti virus provided over an email. I had done that hole procedure...
Hi, I've got Blink Camera and Blink Sync Module. I've got more and more disconnection from the Sync Module to Wifi of my CGNM-3552. Where should I start to investigate ? - if I don't reboot the modem, the sync module will not reconnect to the Wifi - ...
We live in two connected condo units (door cut through years before we bought them). We requie a single wired network for both condos. We have tried wireless repetaerrouterss cheap and expensive. Currently have two separate networks. Ideally would...
My Rogers Ignite 150 Internet speed is extremely slow for the past month. I went to the store to replace the Gigabit modem and now I do not even have 5G wifi available. This is causing difficulties for me since I've been working from home since the p...
My Ignite system is up and running in Gateway mode. My 3 TV boxes are successsfully connected via ethernet cabling and the wifi in my Ignite modem is turned off. I have 2 ethernet wired TP-Link wifi access point modems connected and working but they ...
i have just had a new install and when I try to connect to the wifi from my computer the computer resolution resets to 640 X 400 70 hz and I lose my screen. I tried connecting to my tv and same thing happened so it is not my monitor. I can connect to...
Hi there, Is there a way for me to get 2 different public IP addresses with Rogers on a standard Home plan? They do not need to be static IPs. Just separate public IPs. Is there an extra fee? To be clear- They must be public IPs, not internal net...
What are my options if I want wired connection to my room? But my Ignite WiFi Gateway modem is in the basement? Tried using the search but I could not find a related post. **Labels Added**
