cancel
Showing results for 
Search instead for 
Did you mean: 

Change Default IP 10.x.x.x to 192.168.0.x on Rogers Ignite Modem (White)

ramg1967
I plan to stick around

Change Default IP 10.x.x.x to 192.168.0.x on Rogers Ignite Modem (White)

 

Hello All,

I just got setup with new Rogers Ignite Modem today.  I am able to login to 10.0.0.1. 

QUESTION:

I need to change Local IP Network address from 10.0.0.x to 192.168.0.x.  How and where can, I change this? 

How can I disable DHCP server on the modem?

Thanks

Ram

 

**Labels Added**

5 REPLIES 5

Re: Change Default IP 10.x.x.x to 192.168.0.x on Rogers Ignite Modem (White)

-G-
Resident Expert
Resident Expert

@ramg1967 wrote:

Hello All 


Hi!  Welcome to the Community!

 

I need to change Local IP Network address from 10.0.0.x to 192.168.0.x.  How and where can, I change this? 


When you log into the Ignite gateway, go to "Gateway > Connection > Status", click the EDIT button next to "Local IP Network", and change the IP Address to 192.168.0.1.

 

How can I disable DHCP server on the modem?


That you cannot do, nor can you specify alternate DNS servers.

Re: Change Default IP 10.x.x.x to 192.168.0.x on Rogers Ignite Modem (White)

ramg1967
I plan to stick around

Thanks to your reply.

I was able to find where to change Local IP Address from 10.x.x.x to 192.168.0.x

Too bad, I cannot use DHCP/DNS server within home lab anymore.  Wish rogers had the option within the Modem to disable DHCP.

Re: Change Default IP 10.x.x.x to 192.168.0.x on Rogers Ignite Modem (White)

Biollw
I'm a senior advisor
Put the modem into bridge mode and use your own router and/or dhcp server

Re: Change Default IP 10.x.x.x to 192.168.0.x on Rogers Ignite Modem (White)

ramg1967
I plan to stick around

Thanks!  I will give bridge mode a try and see what happens.

 

I read multiple post on this forum on how to put Rogers Ignite Modem to bridge mode - Not able to understand the whole steps. I don't have Ignite TV service.  

 

This is what, I want to achieve with the new modem 

 

Modem -> 24 port Switch -> Multiple Servers connected to 24 port switch -> Use DHCP server to give IP Address and not the new Ignite Modem -> Use Windows DNS Server IP Address 192.168.0.2

 

Is this possible with bridge mode or do, I need to get a used router for above setup.

Re: Change Default IP 10.x.x.x to 192.168.0.x on Rogers Ignite Modem (White)

Don_Ca
I'm a senior contributor
You need a router if you put the modem in bridge mode.
Topic Stats
  • 5 replies
  • 17459 views
  • 1 Like
  • 4 in conversation