01-18-2019 07:26 AM - last edited on 01-18-2019 08:30 AM by RogersTony
Overnight my network went down. I can't connect to the router and @ lights is not on. Sounds like a modem issue, but it's only weeks old. Agent said it might be a signal issue? Any ideas on what I can check?
*** Added Labels ***
Solved! Solved! Go to Solution.
01-20-2019 07:16 AM
01-18-2019 08:25 AM
01-18-2019 10:52 AM
01-18-2019 11:21 AM - edited 01-18-2019 11:28 AM
Are the front Upstream and Downstream LEDs solid, or are they flashing, indicating that the modem can't connect / sync with the CMTS?
Is the connected port LED at the back of the modem flashing amber (1 gig connect rate) or green (10/100 Mb/s connect rate) to indicate that the modem is connecting with any given wired device?
When you talked with tech support, did you ask the CSR to run a signal check on the modem, just to see if the CMTS can communicate with the modem?
01-18-2019 04:48 PM
01-18-2019 06:35 PM
CSR indicated that she couldn't see the modem and didn't suggest a tech visit? Ugh. Call back, ask the CSR to run a signal check on the modem. I suspect that it will fail automatically. That should prompt a tech visit. If it doesn't, you still need a tech as the modem won't sync up on the downstream channels.
01-20-2019 07:16 AM
01-20-2019 08:28 AM - edited 01-20-2019 08:33 AM
Good morning @cvac!
I'm pleased to hear that the issue was resolved by the tech. Thank you for keeping us up to date!
Please don't hesitate to PM us directly @CommunityHelps if the issue should reoccur. If you're not familiar with our PMing process, you can find instructions here.
Regards,
RogersCorey
12-24-2019 10:20 PM
12-25-2019 04:37 PM
Hello, @Isdgls.
Welcome to Rogers Community Forums! 😃
Thank you for joining this discussion; I can appreciate your curiosity.
Do you have only the @ light off? If yes, then it can't be resolved by a field tech. This situation requires a ticket submission to have the modem correctly provisioned on your account.
If you have the 2nd and 3rd light from the top down flashing along with the @ light off, then this is a signal issue, and it can be resolved by the tech.
Please keep us posted!
Cheers,
RogersMoin