05-05-2023 03:25 PM - last edited on 05-05-2023 03:33 PM by RogersYasmine
Does anyone have experience (good, bad or otherwise) in using an old router as an access point but connecting the AP via a PowerLine adaptor.
I have an XB7 (Arris) and a 1.5 GB internet plan but the stability (not strength per se) my wireless connection to IoT devices has been suspect from time to time. I have an old ASUS AC68U router collecting dust and it has been suggested to try configuring that as an AP to see if I can get past my inconsistent device operations. In getting ready to do that, I started to wonder about putting the ASUS AP in a location more remote from where my XB7 is and the only real option to do that is via PowerLine. I have zero experience with PowerLine adaptors however, and wondered if this is feasible or desirable. In this case I am not really looking for raw speed, but to get more consistent WiFi coverage so I thought locating the AP elsewhere might help on that front.
Good idea? Terrible Idea?
**Labels Added**
05-05-2023 05:46 PM - edited 05-05-2023 05:49 PM
Four years ago I purchased the following when I had an Airport Extreme connected to a bridged Rogers modem and had issues with speed in my basement home theatre:
https://www.tp-link.com/ca/home-networking/powerline/tl-wpa8630-kit/
Do not believe the high speed claims over any distance. I'm satisfied and get about 100 mbps speed via Ethernet and WiFi when close to the unit. I liked that it had both Ethernet and WiFi, so no AP required.
My installation has the IgniteTV gateway on the second floor of my two-storey home, near the front of the house and the adaptor is in the basement at the back of the house - total distance about 15 metres (straight line).
I have my IgniteTV STB plugged in via Ethernet and use a MacBook Air, usually via WiFi, near to the unit next to my home theatre TV. I also connect my iPad and iPhone via WiFi when I'm in the basement and they even connect to the adaptor on the main floor of my house. As I get closer to the IgniteTV gateway on the second floor, the mobile devices switch seamlessly to the IgniteTV XB7 gateway.
I get 1.4 Gbps on my Mac Mini M2 connected via Ethernet to the XB7, port 4.