Editing Wifi Network Details

[athessalonian]

How can I change my wifi network name without using the HomeConnect App?

***Edited Labels***

[-G-]

@athessalonian You should be able to do this by going to http://10.0.0.1 and logging into your Ignite Gateway using a web browser.  The default username and password is admin and password.

Once you are logged in, go to "Gateway > Connection > Wi-Fi", click the EDIT button, and you should be able to change your Wi-Fi network name and passphrase on that network band.  Unfortunately, we are locked out from making any other changes to our Wi-Fi settings.

[athessalonian]

Thank you for the reply. Unfortunately when I do all this under the edit function for some reason I am still unable to change my network name. It appears that the edit function on the network name has been nullified. Furthermore there is a message on the stating that to change the network name one must download the HomeConnectApp. And since I don't own a cellphone I am between a rock and a hard place...

[-G-]

@athessalonian  Sorry about that. I did not realize that none of the Wi-Fi settings can be changed through the web admin UI anymore.  (I run my home network on my own network gear, with my Ignite Gateway in Bridge Mode. and I did not have an opportunity to verify the instructions that I posted.)

I don't know what to suggest at this time if you cannot use the Ignite HomeConnect app.

I would not consider this a solution but one extreme way to change the Wi-Fi network name and passphrase would be to factory-reset the Ignite Gateway and then re-do the basic setup using a web browser.

[57 · Accepted solution]

---

@athessalonian wrote:

... I don't own a cellphone I am between a rock and a hard place...

---

Do you have a compatible tablet, or can you borrow a device?

[athessalonian]

Thank you for responding.

As things stand your suggestion is and can be a viable alternative.

I ended up calling Rogers tech support and had them change the network name.

In doing so I had to spend a considerable time on hold wasting their time and mine.

Can't understand why Rogers did this and in doing so took away the ability, of those of us who either do not own a cellphone and or do not own a smart phone, to be able to do so independently. Incomprehensible...

Regards

[LordDrakkon]

Rogers doesn't seem to care about the niche group of people who do not own cellphones or tablets or those of us with visual impairments that can't see apps on these small devices.  Restricting the webUI away from customers is a poor decision and one that will have me leaving Rogers for Bell as soon as that 3Gbits up and down fiber is available in my building, which thankfully will be very soon.  

[Biollw]

There is a solution, it is called bridge your modem and use your own router. Then you are in complete control of your network environment.

[athessalonian]

Thank you for the reply.

It is a worthy of consideration idea.

Regards

[LordDrakkon]

The only issue with that is... If any internet issue arrises, even if it isn't on the customers end. Support will not troubleshoot the service and simply blame your setup and you using bridge mode.

[Der_Schmengie]

Gateway/Connection/Wifi/Edit for the 2.0 Ignite router version (white) as of Oct 17 2024

[athessalonian]

Thank you for your response.

I am able to log in to the Gateway router using the http://10.0.0.1 portal. When there after having entered the User ID and my password I am unable to do editing of my network parameters without the Homeconnect App. Having said that, I am not quite sure of how to interpret what you wrote. Is this a method that circumvents the Homeconnect App? And if so, how is it implemented?