Hello, @Jelllo
Thank you for posting your concern to the community!
You've reached the right place to post your inquiry. I know how important it is to have fast speeds.
Regrettably, I am not able to assist you directly with your Usenet software. There may be some members in the community that can assist you. If there are any users familiar with Usenet software and can provide insight please feel free to chime in.
RogersTony
@Jelllo are you using the ignite (XB/6/7/8) modem for internet purposes only or do you also have the Ignite TV service running?
My only suggestion at this point is to disable IPV6 in the modem and reboot the pc. Now, if you have the Ignite TV service running, it may not be terribly happy running IPV4 only, but, it should still work.
Perhaps a Custom setting might have to be used which would allow Usenet to run without the IPV6 firewall cut-off.
Is there a setting within the Usenet application to run IPV4 only? I doubt it, but, just asking the question. You would have to dig into the application user manual to look for any IPV6 settings.
.
@RogersTony this is obviously not an Usenet problem, as it works without issue when running on the Hitron modem. The first question is what is the exact nature and cause of the alert:
FW.IPv6 INPUT drop , 77937 Attempts, 2022/12/21 08:19:35 Firewall Blocked
This appears to be related to the security setting for the modem. If you're unable to provide an answer to a modem issue, then you should forward this to the Ignite System manager or the appropriate network engineer who can look up the events that would cause this alert. Someone in the Engineering Section should have access to the documents that specify all of the designed user alerts and the circumstances where those alerts will be displayed.
@Jelllo that's rather interesting. It makes me think that the Bridge mode for the XB6/7/8 modems isn't a real Bridge mode. Ok, so, flip the modem back into Gateway mode and have a look at the firewall security settings. With the Hitron modem there is are the following Firewall Level settings: Maximum, Typical, Minimum, Custom. I believe that the XB6/7/8 modems have a similar setting, although it might be called something else. Have a look at the firewall settings to see what its currently set to, and then consider changing it to a lower setting and/or try the custom setting. Leave the firewall on, but look at the security settings.
Any change that you have the modem's "parental setting" set for the pc, which would most likely block Usenet?
@-G- could probably add to this discussion 🙂
Going back to the Hitron modem? Probably unavailable unless you were running a business account. I suspect that when a residential account has switched to any of the XB6/7/8 modems, you wouldn't be allowed to switch back to a Hitron modem.
@Jelllo wrote:
I think you are right as in it is not a real bridge mode as the firewall is still active, I have disabled the firewall in the modem as I'm using a router now, but the problem remains.
Bridge Mode on the Ignite gateways is a functional bridge mode. The LAN and RF WAN ports are bridged and the Internal Wi-Fi network is disabled, so if you connect your own router, it will obtain public IPv4 and IPv6 addresses and an IPv6 PD. The ignite gateway just blindly forwards traffic.
However, in Bridge Mode, the Ignite gateway still has several internal services active so that it can support things like Home Phone and other fuctions that may be needed by other Igntte services, so it still has its firewall active, still has obtains its own public IP address, and still technically has Wi-Fi active, with hidden SSIDs associated with some of those internal services... but this is all logically separate from the bridged connection that your external router would have.
I'm also not sure what you meant by the phrase that I highlighed in bold. If you are going to be using your own router, enable Bridge Mode. There is no need to disable the firewall. Also, don't run in "gateway" mode with the firewall disabled; that is not an equivalent to Bridge Mode.
As for your other connectivity issues while running in "gateway" mode, I don't know what the problem could be. However, I also don't run any applications that saturate a gigabit Internet connection 24/7. It would not surprise me if the Ignite Gateway's firewall was not up to the task but things should still work fine in Bridge Mode and a decent external router/firewall.
@piskapo30 wrote:
I am having the exact same problem in bridge mode with my own router. I am wondering if it's the firmware Rogers is using on the modem.
It's entirely possible that the network slowdowns are caused by a firmware bug. (Such things have happened before.)
It could also be caused by a problem with how your system's network stack is responding to the increased network speed, especially on Windows if you ever have tried to adjust settings pertaining to your TCP Receive Window.
It's really hard to say for sure what's going on without looking at a sniffer trace.
At this point, I would not advise trying to get the XB8; the firmware for that gateway is still not quite stable yet. (Some users have even downgraded theirs to the XB7.) The XB8 hardware is also very similar to the Technicolor XB7 hardware-wise, and their software is probably built off of the same base code. If you have a CGM4331ROG (the Rogers-branded CGM4331COM) and want to try different hardware, then see if you can get the Arris variant of the XB7, the TG4482A.
@Jelllo wrote:
Tried putting it in bridge mode but the problem remains. How do I get this looked at or should I just go back to using the Hitron?
What did your setup look like when you tested Bridge Mode on your XB7?
When using Bridge Mode, ensure that you only have ONE device connected to the Ignite gateway's LAN port... whether that is a router or a computer that is directly-connected. That is because Rogers will allow the MAC address of only one device (in addition to the Ignite gateway itself) to connect to the public Internet. If you have multiple devices connected to the gateway's LAN ports, only one of them will be able to obtain an IP address; the others will lose network connectivity.
@gator1 @piskapo30 have a look at the bottom post on the following thread:
https://www.dslreports.com/forum/r33573148-Internet-New-1-5G-tier-with-Usenet-problems
Looks like the Network Performance Team has noticed the issue and may be communicating directly with @Jelllo thru this forum. Perhaps @Jelllo can post a comment on whether or not he's had a chance to chat with any members of the Network Operations Center on this issue.
I have set the DOWNLOAD RATE setting in nzbget to 170000 and I have been able to complete all my downloads when none will finish with out the limit
(Image link removed - Please upload images directly to the community by clicking on the camera icon in above the textbox. - RogersTony)
-
8835 views
-
4 Likes
-
-
