05-18-2020 01:24 PM - last edited on 05-18-2020 01:40 PM by RogersCorey
05-18-2020 04:28 PM - edited 05-18-2020 04:31 PM
@customer2020 wrote:
We have Ignite and now we have 2 modems; Hitron CGN3 & Arris XB6
Why? Is one a modem and the other a router?
Seems like duplication of hardware. No manuals, etc. to explain the setup.
The CNG3 and the XB6 are both all-in-one modem + WiFi router devices. Rogers will ship you an XB6 gateway when you order Ignite Internet. I presume that you have had the CGN3 for a few years now. You will need to swap out your old modem and install the XB6 in its place. You may also need to call into Rogers to activate the XB6.
For instructions on how to install the XB6, go to: https://www.rogers.com/customer/support/article/how-to-setup-your-ignite-gateway
It isn't absolutely necessary to use the mobile app to install and configure the XB6. In fact if you do, you will lose access to some settings in the local Web Admin UI. To configure the XB6 using a web browser rather than the mobile app, connect your computer to the XB6 and go to: http://10.0.0.1/
05-30-2020 06:49 PM
i have the 500 ignite package using the CNG3 what i am wondering is do i need to exchange it for the XB6 or is this just for new cx?
05-30-2020 07:16 PM
05-30-2020 07:36 PM - last edited on 05-30-2020 07:45 PM by RogersMoin
didnt back here quick enough i miss quoted the modem i have its the Hitron CODA 4582 Modem so i am prob not eligable for the other modem that i was asking about