cancel
Showing results for 
Search instead for 
Did you mean: 

Fibe or fibe powered?

1tpg1
I've been here awhile

Bell is digging in my neighborhood, and I assume will offer me 8Gbps soon.

Rogers SAYS they have fibe-powered in my 'hood, but these are the original cable wires from 33 years ago.

They say they can give 1.5 Gbps max - how? Is this compression and other tricks?

 

*Added Labels*

 

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Fibe or fibe powered?

57
Resident Expert
Resident Expert

@1tpg1 wrote:

1. Rogers SAYS they have fibe-powered in my 'hood, but these are the original cable wires from 33 years ago.

2. They say they can give 1.5 Gbps max - how? Is this compression and other tricks?


1. The correct spelling is fibre, as in fibre optic cable.  Fibe is Bell's name for their internet connection, whether it's via twisted pair (more on that later), or via FTTH (Fibre to the home)  It is Bell that is misleading the public by using that name when twisted pair is used to the home.  We call that service Fib !

2. The RF-coax cable is perfectly capable of 1.5 Gbps or more.

3. The twisted pair that Bell typically has/had to most homes is only capable of about 50-100 mbps.

4. My speedtest results with my Mac Mini M2 10Gbps computer connected to my XB7 Gateway via Ethernet is always around 1.4. Gbps and I don't even subscribe to that service, I subscribe lower and save money.  Many people have 1.5 Gbps service.  Some people have complained that they can't get the 1.5 Gbps, but the issue is always related to some limitation in their hardware like a port only capable of 1.0 Gbps or using WiFi, etc.   

 

View solution in original post

17 REPLIES 17

Re: Fibe or fibe powered?

Biollw
I'm a senior advisor

Rogers node will be fiber then coax to your house. Bell is also digging in my area.

Don't know about comprerssion, though I rather doubt it. RG6 has capabilities of upto10gb.

Re: Fibe or fibe powered?

1tpg1
I've been here awhile
Without fibe to your house's fibe modem, it's hard to believe the speeds will be as advertised from Rogers. Where is the node for my neighborhood located? If the whole area is served by coax, and sharing the node, I can't see how speeds can be called "fibe"
This is deliberately misleading marketing.

Re: Fibe or fibe powered?

57
Resident Expert
Resident Expert

@1tpg1 wrote:

1. Rogers SAYS they have fibe-powered in my 'hood, but these are the original cable wires from 33 years ago.

2. They say they can give 1.5 Gbps max - how? Is this compression and other tricks?


1. The correct spelling is fibre, as in fibre optic cable.  Fibe is Bell's name for their internet connection, whether it's via twisted pair (more on that later), or via FTTH (Fibre to the home)  It is Bell that is misleading the public by using that name when twisted pair is used to the home.  We call that service Fib !

2. The RF-coax cable is perfectly capable of 1.5 Gbps or more.

3. The twisted pair that Bell typically has/had to most homes is only capable of about 50-100 mbps.

4. My speedtest results with my Mac Mini M2 10Gbps computer connected to my XB7 Gateway via Ethernet is always around 1.4. Gbps and I don't even subscribe to that service, I subscribe lower and save money.  Many people have 1.5 Gbps service.  Some people have complained that they can't get the 1.5 Gbps, but the issue is always related to some limitation in their hardware like a port only capable of 1.0 Gbps or using WiFi, etc.   

 

Re: Fibe or fibe powered?

1tpg1
I've been here awhile
Thanks good reply. I am still looking forward to fibre optic to my door.

Re: Fibe or fibe powered?

mozerd
I plan to stick around

@1tpg1 

Do not be FOOLED by Rogers Fiber-Powered Internet Claims ... The chances of you getting sustained 1.5Gbps on your COAX connection is ABSOLUTLY NIL ... you might be lucky to get bursts of 900Mbps 

 

Bell's Fibre [other wise known as Pure Fiber in Rogers term] will provide that sustained rate that you subscribe too.

 

Where Rogers does provide Pure Fibe that "rate " is far more reliable over that provided by DOCSIS... So if you actually get a choice of Providers I suggest that you select Pure Fiber  ... 😊

David Mozer
IT-Expert on Call

Re: Fibe or fibe powered?

57
Resident Expert
Resident Expert

@mozerd wrote:

@1tpg1 

...The chances of you getting sustained 1.5Gbps on your COAX connection is ABSOLUTLY NIL ... you might be lucky to get bursts of 900Mbps 


I'm not sure why you say such things.  I'm consistently getting 1.4 Gbps, as posted earlier in this thread and I'm not even on that high tier.  Other people have posted getting their 1.5 (or slightly more if they're on that tier).  People with the 1 Gbps service, when that was the highest tier, regularly got around 940 Mpbs, but probably get more now that 1.5 is available in many areas.  With Rogers, people get what they pay for, or more if they aren't on the highest tier due to speedboost.

 

Of course, FTTH will be superior with any provider, however, most people don't really need more than say 150 or 300, or 500 Mbps at their home.

Re: Fibe or fibe powered?

EhmTeeEhf
I'm a senior contributor

I have just upgraded to the 1.5GB on COAX, and I am getting speeds of over 1800Mbps consistently. I wonder if your area is saturated? Or you are on a node that hasn't been fully upgraded. On WiFi ya you might be getting 4-500 Mbps, I do on my phones. However using a 2Ghz Switch, and Cat 6 Ethernet Cabling. Also a 2.5Gbit NIC (PCIe) and also the 2.5Gb Built in Mobo NIC. I am getting constant speeds of well over 1800Mbps. Also doing the web browser speed test isn't accurate, you need to download the dedicated app, and do multiple tests. Also any VPN/Anti Virus/Anti malware like Windows Defender should be disabled during the test. When i first got it, this was killing my speed, I called one of my co workers in Internet and he told me to disable windows Defender, as it causes issues. Once I did that it was amazing super fast. I'll upload a video of my speed test i am doing today. Then post it.

Re: Fibe or fibe powered?

EhmTeeEhf
I'm a senior contributor

Rogers - Rogers Test 2.jpgTest 1 Rogers - Telus.jpgTest 3 Rogers - Bell Mobility.jpgTest 4 Using Rogers Speed Test.jpg

Re: Fibe or fibe powered?

EhmTeeEhf
I'm a senior contributor

I decided to upload screenshots, the post limit would not allow me to upload the entire video.

Re: Fibe or fibe powered?

EhmTeeEhf
I'm a senior contributor

Its not "Fibe", which is copyrighted by Bell.  Rogers offers 1.5Gbit over Coax, but they also offer FTTH (Fibre to the Home) speeds that are "pure fibre" using a full fibre connection to a fibre modem you can get that give those speeds, (Up to 8Gbps as of now) however most home users don't upgrade their network infrastructure to support these speeds. So there could be a bottleneck there.

Re: Fibe or fibe powered?

EhmTeeEhf
I'm a senior contributor

Exactly most home users never even consider why they can't get the speeds. They use 1Gbit Ethernet cards most of the time. They don't consider if their Mobo Nic supports 2.5Ghz, they don't even go in and change the speed either in the Bios on some Mobos, or in the Network options of the NIC itself.

Re: Fibe or fibe powered?

EhmTeeEhf
I'm a senior contributor

I am also eagerly awaiting the Fibre connection as well. I have been on the waiting list for like a year. As an employee I keep bugging the network team "when is it coming to my Node! I need it NOW!"

Re: Fibe or fibe powered?

EhmTeeEhf
I'm a senior contributor

Sounds like a bell advertisement, however see my screenshots below. I get 1800Mbits per sec on on 1.5Gbit Service  consistently. The only modifications I did, upgrade my Network card, Upgrade my cabling to support 10Gbit in future, and also made sure my connection was not over 50' as this would cause massive interference. On WiFi on most of my families devices they get easy 500Mbit on WiFi.

Re: Fibe or fibe powered?

-G-
Resident Expert
Resident Expert

@mozerd wrote:

@1tpg1 

Do not be FOOLED by Rogers Fiber-Powered Internet Claims ... The chances of you getting sustained 1.5Gbps on your COAX connection is ABSOLUTLY NIL ... you might be lucky to get bursts of 900Mbps 😊


Nope.  I subscribe to the Ignite 1.5 Gigabit service and I CONSISTENTLY attain speeds in excess of 1.8 Gb/s, and I can achieve that even with Rogers-supplied gear.

 

https://www.speedtest.net/result/14420702886

 

(That particular speed test was performed over WI-FI 6E, at close range, with an XB8 running in gateway mode.  I can also attain those speeds with 2.5 Gigabit Ethernet, and over my own network gear with the Ignite Gateway in bridge mode.)

 

I was able to achieve those speeds even when I was still being serviced by an old analog fibre node.  Now that my area has been upgraded to a DAA node and R-PHY, it will be possible for Rogers to eventually provide me with even higher upload and download speeds.

 

I'm not a fan of DOCSIS; a properly-implemented EPON/GPON/XGS-PON FTTH service is FAR superior in every way... but Rogers can definitely deliver and exceed their advertised speeds with Ignite Cable Internet.

Re: Fibe or fibe powered?

EhmTeeEhf
I'm a senior contributor

For the record I did not have to upgrade anything on my network except change the NIC settings, and i was getting good speeds, but there was a lot of noise on the line while testing, so replacing all my cabling and my switch was a personal choice. Its future proofing my network

Re: Fibe or fibe powered?

cyberguy2018
I've been here awhile

I currently use Bell Fibe internet. 1.5Gb Up and 960Mb Down (small b = bit, capital B = byte).

 

In my installation it is pure fibre (Canadian spelling - usually use American)  FTTH right up to my modem. No copper or COAX at all. From there it is all Ethernet and Wireless. My internet speed test at the modem shows that I get the advertised speeds both up and down. For wireless I use an AX11000 speed wireless modem with appropriate wireless receivers on all my equipment and get about 1.2Gb speeds with those. Wired connections are limited to 1 Gb speeds and I get those even thru the internet. While I don't always get my 100 MB/sec download speeds I do often get 50 - 75MB/sec. I do get nearly 90 MB/Sec pushing stuff out to my cloud.

 

The point I am making here, don't assume that that the connection to the home is via copper. In newer subdivisions (in the last 10 years) and with more and more older installations it is all fibre/fiber optic cable and FTTH or at least FTTN (Fiber To The Node).

 

I don't work for Bell. I have used both since they are the ONLY ISPs that can install in my newer all-FTTH housing development regardless of CRTC rules against the monopolies.
One of the things I have always HATED about Rogers is their insistence on older Asymmetrical internet speeds pushing download over upload speeds. A real pain in the butt for cloud use. Only recently, with Rogers Fiber (American spelling) getting in some cases symmetrical up and download speeds on their Gigabit service, but from the time I las moved to Bell, they were still asymmetrical 1Gb down and 30 Mb up.

 

Due to some sloppiness in Bell's IPTV service quality, I will be looking more closely at Ignite and possibly talking to Rogers about moving over if they can do better.

Re: Fibe or fibe powered?

LordDrakkon
I'm an advisor

I easily get close to 1.8Gbps down on Riger's 1.5Gbps.  My main issue with it because the absolutely trash XB8 with only a single 2.5Gbps port is, the dismal 150Mbps up.  I get closer to 180Mbps up but still by today's standards, it's a joke!  I want at least 1Gbos up.  Once Bell is finished their upgrades to where I live to provide 3Gbps in both directions.  Bye bye, Rogers!  I am not saying what Rogers is offering is bad.  I personally upload a lot of stuff along with stream on occasion as well as host servers for gaming.  It's just not adequate for my needs.  

Topic Stats
  • 17 replies
  • 7443 views
  • 21 Likes
  • 8 in conversation