1 ACCEPTED SOLUTION
Accepted Solutions
@elliotk1 wrote:
@G, Thanks for quick reply.
Problem seems to have resolved itself. The pods connected perfectly this morning. I followed the same steps as i did yesterday.
My speeds are very different between being connected to gateway and pod.
- Gateway: 218mbps down/13 up
- Pod: 46 down/16 up
Is this normal?
Glad to hear that your Pods are working today! What Internet speed do you subscribe to? If you have the 150u service, then your gateway-connected speed is okay.
With the 1st gen Pod that you have, throughput typically tops out at 200 Mb/s. That's because that Pod only has one 2.4 GHz radio and one 5 GHz radio and therefore, one (usually the 5GHz radio) will be used for both network client connections and the backhaul link to the Ignite gateway... so the connection speed will max out at half of that radio's speed. The 2nd gen Pod has three radios, so it has a dedicated 5GHz radio for its backhaul link.
The speed that you are getting with your Pod is slow, probably because you do not have it placed optimally. The Pod needs to be placed in a location where it has excellent connectivity to the WiFi clients that connect to it and to the gateway. If you place the Pod in a room with poor connectivity to the gateway, the network clients may get a good connection to the Pod but the Pod will have a very slow connection to the Ignite gateway.
@elliotk1 wrote:
In the app it shows 2 different pods, one with 1 ethernet port and one with 2 ethernet ports. Mine (the WNXE12AWR (XE1v2-WN) ignite pods) have one ethernet port. Is it possible that this version of the pod is not compatible with my gateway and I need the pods with the 2 ethernet ports?
The pod that you have (with a single Ethernet port) is compatible with your Ignite XB6-T gateway.
I can't offer any additional tips other than what is in the Installation and Troubleshooting guides.
The Pod with two Ethernet ports is a new tri-band version that Comcast released a few months ago. (For more info, see https://www.xfinity.com/learn/internet-service/wifi/xfi-pod )
Looks like Rogers will finally be offering the new and improved Pod very soon but I don't think that it has been released yet. There is no information about it on their support pages, and that is almost always the first place where any information about new hardware gets posted.
@elliotk1 wrote:
@G, Thanks for quick reply.
Problem seems to have resolved itself. The pods connected perfectly this morning. I followed the same steps as i did yesterday.
My speeds are very different between being connected to gateway and pod.
- Gateway: 218mbps down/13 up
- Pod: 46 down/16 up
Is this normal?
Glad to hear that your Pods are working today! What Internet speed do you subscribe to? If you have the 150u service, then your gateway-connected speed is okay.
With the 1st gen Pod that you have, throughput typically tops out at 200 Mb/s. That's because that Pod only has one 2.4 GHz radio and one 5 GHz radio and therefore, one (usually the 5GHz radio) will be used for both network client connections and the backhaul link to the Ignite gateway... so the connection speed will max out at half of that radio's speed. The 2nd gen Pod has three radios, so it has a dedicated 5GHz radio for its backhaul link.
The speed that you are getting with your Pod is slow, probably because you do not have it placed optimally. The Pod needs to be placed in a location where it has excellent connectivity to the WiFi clients that connect to it and to the gateway. If you place the Pod in a room with poor connectivity to the gateway, the network clients may get a good connection to the Pod but the Pod will have a very slow connection to the Ignite gateway.
@elliotk1 wrote:
Is it true mesh? Do pods go pod to pod if that is the best path or only pod to gateway? I'm asking because I can put a pod half way between gateway and the already installed pod if that would help
Yes, it is a true mesh and the logical topology of the mesh will self-optimize over time. In most cases, a hub-and-spoke arrangement (with the Ignite gateway placed in a central location in your home) is preferable and the most stable... although that is not always practical or possible. (I'm also hedging because you will typically get the best WiFi speeds when you place the Ignite gateway in a location that will provide an excellent signal to as many WiFi clients in the home as possible... and if that means having an intermediate Pod, so be it.)
@sarge1 wrote:
Why is it not recommended to use an extension to connect the WiFi Pod?
The Pods were designed to be plugged into a wall socket and the design of their internal antenna array was optimized for that configuration. If the Pod is running a different orientation, it should still work but that will also affect its Wi-Fi coverage.
@MEmptage wrote:
I don't like how "it solved itself"was the resolution. I have the exact same issue... And it's not resolving itself lol.
It all depends on why the Pod was going offline to begin with. A Pod is useless (and actually a detriment) if it does not have a good, strong, fast connection to the Ignite gateway. It also needs to be placed in just the right location; not too close and not too far away.
I ran into a situation recently where a newly-installed Pod kept going offline. The wall, separating the Pod and Gateway, had plumbing and ductwork that blocked the Wi-Fi signal. I unplugged the Pod, moved the Ignite gateway a few inches, confirmed that the Pod's location was now getting a good Wi-Fi signal, plugged the Pod back in, and everything has been working great ever since.
As in, if you have to use an extension, you should make sure that the pod is sitting upright. The antenna polarization is, or should be vertical polarization, so, for optimal results, you want to ensure that the modem and pods are sitting upright so that the polarization matches at the transmitter and receiver.
-
11664 views
-
6 Likes
-
-
