i have a Buffalo nas LS 210 and a LS220. They work terrific with bell routers (i update my bell router 3 or more times, from the 2000, 3000, and the newest one. But when i try it on Rogers TG4482 router, it doesn't work, somehow the port forwarding is blocked by the router. The only way i got it to work is use the Upnp mode on my nas, but any power interruption and i have to reset my nas to make it work, not only power interuption, but it doesn't work after some many hours, usually no more than 24 hrs. and resetting the Nas will make it work again, for another 5 to 10 hours or so. I look up the problem online and the only solution is that bridging the router will work, but, its too complicated for me, I have to have another router, it will only work for one nas, and roger will not touch it if any problem arises. I have contect Roger if they can recommend which nas will work with the TG4482 and they cannot recomment one, which is kinda strange. They told me to ask Best Buy. maybe i may try that or just go back to bell, i bet i can put a dozen nas with their router at the same time with no problem whatever.
