I had a similar issue with a printer. It was saying connected, but wouldn't print after replacing modem with Gen 3. I had to go to WiFi Details in the app, select edit WiFi details and set security to WPA2.WPA3 isn't supported by some older devices.
I had a similar situation, where a favourite was a channel I no longer subscribe to. I was able to remove it, on the Guide, by first selecting the favourites view of channels. Then, nagivate left until the channel name is highlighted in white (with...
I've setup modems to pass VPN server traffic to a local PC. I prefer to use VPN software that uses firewall traversal (opens a port as needed, no setup of modem required). Firewall of the modem can be left at Typical level, But you can setup port ...
I've changed a TV that was attached to an Ignite TV box, and if it's not the same make (at least) - you'll likely need to use the Samsung TV remote first (at least once) to select the specific input. From the Samsung manual for the model of TV you h...
If you ever have things not show up correctly on a box, pull the power on the TV box and reboot it. You can do it from the remote - Press A, Restart - Select Restart again. It will re-load the box and usually fix issues with the channels or other i...
