Ran a test with 100 iterations at an interval of 20ms, here was the results: Packets: sent=100, rcvd=100, error=0, lost=0 (0.0% loss) in 1.991390 secRTTs in ms: min/avg/max/dev: 5.486 / 18.239 / 100.958 / 18.166Bandwidth in kbytes/sec: sent=3.012, rc...
My bad, I misunderstood the first post referencing the older models. I can confirm those ping spikes do appear on the XB6 by the way. My main point was just that the average latency to the CMTS being high will show evidence of congestion with a large...
My high response times are not due to an internal timing issue, but I understand that can be a problem due to how frequently the requests are sent out. Which is why I directed more attention to the average, which is what I have found to be most refl...
Run a the command "tracert 8.8.8.8" in windows command prompt. This will return the IP address of all the hops before getting to the google DNS servers at 8.8.8.8. Your CMTS should be the second IP, or the one after your router (the router will be e...
The spikes indicate high load on their own, but if the average is anywhere over 20ms, it is also a sign of congestion. If you test again later at night you should see the latency drop to <20ms, and also see full bandwidth return if you run a speed ...
