Rogers Community

fishon · 09-27-2016

I recently switched my CGN3ACR for the CGNM-3552 to take full advantage of ipV6. Have latest firmware 4.5.8.22. My CGN3ACR provided very robust coverage on both bands. I have a wifi analyzer right next to the 3552 modem. On the 2.4 band -30dBm and -4...

fishon · 09-27-2016

I've tested it on both ranges. As per your link, lower channels require less power to drive the same signal, so lower channels require less power. The output of this modem, as far as wireless strength, is only half the strength of the CGN3ACR. I used...

fishon · 09-21-2016

Thanks!!! I went and switched my CGN3ACR for the CGNM-3552, and voila, native IPv6 right out of the box!!! Scored 19/20 at ipv6-test.com and 10/10 at test-ipv6.com. Couldn't be more pleased! Thanks all, especially RE-Datalink for the thorough respons...

fishon · 09-20-2016

It's a CGN3ACR. The firmware is only 4.2.8.12Is that the issue? Thanks so much for your detailed response!

fishon · 09-20-2016

Excuse my limited knowledge of this subject. If I go to network properties and uncheck TCP/IPv6 I am able to access IPv6 sites. I used test-ipv6.com. It says I am using Teredo, which I gather is a "tunnel" for carrying ipv6 over or in ipv4. If I chec...

fishon · 01-13-2014

So I have now tried six different USB flash drives of varying sizes ... all of them are mappable if formatted Fat32, none of them work if formatted NTFS. Tried exFat, as this breaks the 4GB file size barrier. None are mappable under exFat. My quest g...

Rogers Community

User Statistics

User Activity

Very weak wifi on 5G band

Re: Very weak wifi on 5G band

Re: Rogers IPv6 Status

Re: Rogers IPv6 Status

Re: Rogers IPv6 Status

Re: Maping an external drive on CGN3 Gateway