Resolved! How do I disable WPS in Ignite modem?
So, WPS is a security risk. Does anyone know where the option to disable it is in the settings? Tech support says you can't disable it, but I am not sure that is true. ***Edited Labels***
So, WPS is a security risk. Does anyone know where the option to disable it is in the settings? Tech support says you can't disable it, but I am not sure that is true. ***Edited Labels***
Hi, I cannot find the option to change DNS to my custom DNS server on CGM4331COM which I recently received as a replacement for Hitron Coda. I'm using my own DNS server hosted locally with an ad filter and configuration for my local devices. Also, I...
For the last two days the modem has started loudly beeping at 10:00 A.M. and I have to unplug it to stop the noise. Once I unplug it and plug it back in everything works as normal. Why is it doing this and how can I stop it. Thanks. *Added Labels*
I have a very weird problem and am looking for any feedback. At 3:25 pm everyday my Rogers Modem “Reboots”. After the reboot everything comes back up normally. I have tried all the usual fixes, e.g. rebooting the Ignite TV box, Power rebooting the m...
Hi all, I have a question about Ignite modems and speeds. I recently was upgraded to 1.5GB Ignite internet but I know that my current setup will only allow a max of 1GB speed (my computer's NIC is maxed at 1GB; and my cables are only Cat5). So, I ...
Looking to get a modem replacement without sitting on hold for hours.I have 1.5GB internet but only a gen 1 modem.How can I get a gen 2 or even better a gen 3 modem? ***Edited Labels***
Recently, maybe in the past 3 or 4 weeks I've had unbearable Latency Issues in games and VoIP calls. It doesn't affect any specific game and it's even calls that cut out intermittently and catch up a second later.Latency in games hovers around 80ms a...
How to enable guest mode on new rogers Ignite TV modem/router? **Labels Added**
Hi There, I have been using my XB6 in BRIDGE mode for over 2 1/2 years. I have my own router and eight of my own WiFi access points to cover my house and yard. Up until the last few months, the internal 2.6 and 5 GHz radios of the Ignite modem w...
Hi all, Just got Rogers Ignite 1.5. Speeds are no where near what I expected - typically around 2-300 mbps. The absolute max I get is 600mbps when Im right beside the router. Rogers sent me the older XB6. Do I need a new modem or change some settin...
Original configuration:I had a CODA-4582U modem operating in bridge mode connected to my Synology RT6600ax Router (and others previously). I have a Synology NAS unit connected via Ethernet cable to the Synology Router and use RAIDRIVE to connect to ...
For some reason my home wi-fi network is not visible when the list of available networks is searched on my devices. It can be accessed using the "OTHER" tab and manually inputting the network name and password. Part of the problem is sometimes the...
I recently set up my new Ignite Internet Gateway, and now my download speeds are way down to 50 Mbps, prior to setting up the new gateway/modem, I was getting 250 Mbps on average, so I asked the question do I still need to use my router ?? *** Edit...
Hello,Last month Rogers sent me an XB6modem/router and I was asked to throw away my Shaw Hintron router. Eversince I have installed this XB6 I am getting variable speeds on my 300mbps plan. I have measured speeds all the way down to 6 mbps on wifi! I...
Hi all, Since last week, I've started to get really bad lag spikes while gaming. I'm getting this on all PCs in the house (connected via ethernet direct to modem). Internet speeds and latency are fine when checking speedtest, but every so often the ...
Incomplete DHCP4 functionality in Technicolor CGM4140COM: Hi all, I was getting an error message when assigning DHCP reservation for my device, and then when I try to assign it again I get a message that the IP address had been already reserved. Bu...
We are long time Rogers customers with a recent switch to Ignite. It would seem that Rogers resets the modem ever few weeks sometime in the night causing our router to lose connection to the modem. We have to factory reset both units to reset the con...
I currently have the Ignite Internet Gigabit 1.5 package using the XB6 (the first ignite modem, Gen1) - I also have a Google Nest mesh setup (Gen 2) - not the Pro but not the first Google Wifi mesh. I have bridged my Rogers modem, and I have 6 Googl...
I've already set up a port forwarding with range on one of my computers. I would like to set up an additional port forwarding with a different range on the same computer. When I try this, the computer is not available to be chosen even though it is c...
So here is the quick story. We have had Rogers home internet at our home in Markham since we moved here August 2022. Things were fine till Feb 2023. I do lots of work from home so the usual Teams calls were smooth and I never heard any complains. I...