I'm considering switching from cable to Ignite, but saw the thread on probs using VPN's on the Ignite system ("Issues with Connecting to VPN w/ Ignite"). PIA works great with the internet I get with cable, called Ignite 75, but I expect it's differe...
Poor communication in second floor and basement ***Added Labels***
I recently got new ignite router installed, and I used pod to replace my previous wifi mesh network. Everything seems fine. But this morning, my 2 pcs have some networking issues, and I found they don't have ipv4 addresses assigned. ifconfig doesn'...
Hi, I'm having a really bad issue with my ignite internet. I noticed that my modem always updates while I'm using, sometimes I'm gaming or streaming and out of nowhere my internet goes down, the lights on my modem goes green... starts to blink... the...
CODA 4582 with latest firmware (7.1.1.37) in bridge mode on business 1 Gbit service Service is stable for 8 - 16 hours and then various traffic over the VPN gets slowed down / dropped The modem was recently replaced and the problems persist Pow...
Hi, I have an old Linksys WET54g WiFi to Ethernet bridge, that I'd like to use to avoid pulling a cable, to an Ethernet only printer in my basement. The Linksys WET54g itself is known to work (was running fine in my previous LAN setup) but I am hav...
I see 2 accounts under my Rogers Internet id
Hey guys, So I've started facing momentarily slowdowns on browsing, WiFi connection drop/reconnection cycles in various parts of the house, Alexa taking it's own time to reply, etc. Naturally, when I called Rogers, they said your Hitron CGN3 is ...
I'm having trouble getting an IPv6 gateway address from Rogers on my pfsense SG-1100 from a CODA-4582U, even though it's picking up an address from a parallel DSL connection (in Dual WAN) just fine. I've read every thread I could find: https://ww...
We have a wall that blocks the ability to unscrew the coaxial cable. We want to connect it to the Gen 2 Ignite modem but we're having difficulty. We can't unscrew the bolt, we can't take off the plastic clip, any advice? ***Edited Labels***
Using Outlook 2019 locally and having significant issues re synchronization. System is synchronizing endlessly and this can delay sending emails and/or exiting the Outlook program. Using IMAP settings and have an app p/w. I do not need to access em...
My old cable modem is past EOL and Rogers wants to replace it with an IGNITE setup. I just want a dumb cable modem, as my downstream network hardware is quite robust. It looks like Rogers uses DOCSYS 3.1 and the Netgear CM1200 looks reasonable. A...
I have setup Adguard as a service on my Mac and it requires me to put the IP address in my DNS settings. However, when I do this and save, the traffic isn't being routed to the IP. Am I missing a step? I included a screenshot of where I am entering ...
Full transparency --- I consider networking a black art Recently implemented the new Ignite Gateway and noticed IP addresses are now 10.0.0.xx instead of 192.168.0.xxx so not understanding why ? I am having problems accessing various devices...
Ok community, here is a puzzle. I was watching my shows on Netflix using the built in app of my Rogers box (Xi6-T). All was good. All has been good since signing up with Ignite 2 years ago. Well, my first error message came up the next day I deci...
Hello, I am trying to set up an Asus RT-AX88U. When I set up my Surface Pro 7 with an ethernet cord (Internet is connected, and I can go to other sites), I get a message "This site can't be reached" when I try to go to 192.168.0.1. On wifi, I can get...
I travel a bunch, and being able to reboot the router is important when wifi connectivity to all my home devices is lost. Can someone please walk me through the steps to set this up? Thanks. ***Edited Labels***
I just had the Ignite XB7 installed with the 1Gb service. Tech ran all new lines right from the pole to the gateway. No splitters just a straight run. One would think I would be getting good service but the internet connection is dropping constantly...
Hi, I would like to send email on Rogers SMTP server using my own domain. What is required to do this? Thanks! ***EDITED LABELS***
Hello - Was just wondering if it is possible to connect an older router I have as an access point to stretch my wireless network into my basement when running a Rogers Ignite Modem? I am currently running Rogers Ignite Modem in normal wifi mode and ...
