cancel
Showing results for 
Search instead for 
Did you mean: 

Only receiving 1/3 of 1.5 Gbps Speeds

BlueJays16
I plan to stick around

Just upgraded to 1.5 Gbps.  Use to be on 1.0 Gbps tier.  Never was able to reach more than 700 even in off peak time.  Speed tests are usually around 500 or so.  

 

When I had 1Gbps I had an Asus AC-86U router which was replaced by an Asus GT-AX6000 router.  Speeds were still the same either hardwired via Router or to modem directly.   This was on the XB6 modem.  The XB7 modem was replaced when I got the new Internet tier but still experiencing the same issue.  Hardwired to XB7 and through the router.

 

My PC has an Intel I225-V (2.5Gbe) card.  Hardwired to the modem with the tech onsite and only got 500 down 55 up.  He replaced the connectors outside and said it should ramp up in a couple of days.  But I was already getting those sub par speeds when I was on 1Gbps package and XB6 modem.  Now that I'm on 1.5 Gbps tier I expect to see around 1200 down at least directly connected to my PC via the 2.5Gbe port on the XB7.  

 

What are my next steps here to get some improvements in my speeds.   

 

Testing Setup:

- XB7 2.5Gbe to PC Intel I225-V 2.5Gbe LAN directly (~500 down, 50up)

- XB7 2.5Gbe to Asus GT-AX6000 2.5Gbe WAN and LAN 2.5 Gbe to PC 2.5 Gbe (~500 down, 50up)

 

End goal setup:

- XB7 2.5Gbe to 2.5Gbe WAN on Asus GT-AX6000

- Asus GT-AX6000 2.5Gbe LAN to QNAP QSW-2104-2T (4 port 2.5Gbe and 2 port 10Gbe) switch

- QNAP switch 2.5 Gbe to PC 2.5 Gbe Intel I225-V LAN card and other associated 2.5 Gbe items

 

 

*Added Labels*

 

 

82 REPLIES 82

Re: Only receiving 1/3 of 1.5 Gbps Speeds

-G-
Resident Expert
Resident Expert


@Erick2 This thread was started by users who upgraded from the 1 Gigabit service to 1.5 Gigabit only to see their speeds decrease?

 

Are you seeing this problem as well or are you experiencing a different issue where your speed tests over Wi-Fi (presumably to an Ignite XB7 gateway) are maxing out at 550 Mb/s?

 

If you are asking about slow speeds over Wi-Fi, I have seen performance vary depending on the operating system that your computer is using, the Wi-Fi hardware and driver.  I have also seen Wi-Fi performance drop with some Ignite Gateway firmware builds.  For example, I'm running into some performance issues with my Mac and the current Technicolor XB7 firmware (CGM4331COM_5.2p21s1_PROD_sey).  I also experienced Wi-Fi 6E performance and stability issues with the AX210 card on a Windows PC, and it took quite a bit of time (and troubleshooting) to find a driver that would play nicely with the current XB8 firmware.

Re: Only receiving 1/3 of 1.5 Gbps Speeds

BlueJays16
I plan to stick around

so only update I got from Rogers is this.  Still only 650down 

 

A quick follow-up; I just heard back from the backend teams, and they do not see any indication of slow speeds. 

 

The results are fantastic.

  •  Your package is accurately provisioned for 1.5G/50Mbps speed
  • All 4 Upstream channels are running with good signal levels, including the OFDMA, looking good
  • All 32 Downstream channels, including 2 OFDMs, are looking good
  • The SNR on both Upstream and Downstream looks optimum
  • The node (neighbourhood) performs excellently even in the peak periods

 

We can arrange a tech to test the speed at your premises if you would like. 

Re: Only receiving 1/3 of 1.5 Gbps Speeds

-G-
Resident Expert
Resident Expert

@BlueJays16 Is your Intel I225-V on an Intel-branded board/adapter or integrated onto a system board made by ASUS or some other 3rd-party?

Re: Only receiving 1/3 of 1.5 Gbps Speeds

BlueJays16
I plan to stick around

@-G- I no longer have the I225-V anymore (but it was a 3rd party from IOgear) as I swapped to the Realtek PCIe 2.5Gbe card.  I was able to pull in at one point 1800.  Where as the I225-V was unable to do that at all. 

 

Re: Only receiving 1/3 of 1.5 Gbps Speeds

BlueJays16
I plan to stick around

bringing this back up, Rogers said my line is okay.  Just been busy with other stuff how are my signals from the modem.   I performed a factory reset and the speeds were unbearable at first, but now they have settled and stabilzed, but only get ~500. 

 

IndexLock StatusFrequencySNRPower LevelModulation

Downstream
Channel Bonding Value
20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
25
26
27
28
29
30
31
32
34
33
34
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
693 MHz
279 MHz
579 MHz
585 MHz
591 MHz
597 MHz
603 MHz
609 MHz
615 MHz
621 MHz
633 MHz
639 MHz
645 MHz
651 MHz
657 MHz
663 MHz
669 MHz
675 MHz
681 MHz
687 MHz
699 MHz
705 MHz
711 MHz
717 MHz
723 MHz
825 MHz
831 MHz
837 MHz
843 MHz
849 MHz
855 MHz
861 MHz
216 MHz
350000000
216000000
39.3 dB
41.9 dB
40.2 dB
40.2 dB
40.1 dB
40.2 dB
40.3 dB
40.0 dB
34.5 dB
0.0 dB
0.0 dB
38.8 dB
38.9 dB
39.3 dB
39.1 dB
39.1 dB
39.3 dB
38.1 dB
38.8 dB
39.0 dB
38.9 dB
39.0 dB
39.2 dB
39.3 dB
39.0 dB
39.9 dB
38.7 dB
39.6 dB
39.9 dB
40.2 dB
40.2 dB
40.4 dB
40.8 dB
40.8 dB
40.8 dB
-6.6 dBmV
0.6 dBmV
-4.9 dBmV
-5.2 dBmV
-5.3 dBmV
-5.2 dBmV
-4.7 dBmV
-5.4 dBmV
-5.7 dBmV
-5.8 dBmV
-6.6 dBmV
-6.5 dBmV
-6.7 dBmV
-6.3 dBmV
-6.7 dBmV
-6.6 dBmV
-6.5 dBmV
-6.8 dBmV
-7.3 dBmV
-7.0 dBmV
-7.1 dBmV
-7.0 dBmV
-6.5 dBmV
-6.1 dBmV
-5.9 dBmV
-4.7 dBmV
-5.2 dBmV
-5.3 dBmV
-5.0 dBmV
-4.2 dBmV
-4.2 dBmV
-3.9 dBmV
0.5 dBmV
-3.3 dBmV
0.5 dBmV
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
OFDM
OFDM
OFDM

 

 

IndexLock StatusFrequencySymbol RatePower LevelModulationChannel Type

Upstream
Channel Bonding Value
1
2
3
4
5
Locked
Locked
Locked
Locked
Locked
21 MHz
25 MHz
32 MHz
38 MHz
4 MHz
2560
5120
5120
5120
0
43.5 dBmV
46.3 dBmV
45.8 dBmV
46.3 dBmV
435000.0 dBmV
QAM
QAM
QAM
QAM
OFDMA
TDMA_AND_ATDMA
ATDMA
ATDMA
ATDMA
TDMA

 

IndexUnerrored CodewordsCorrectable CodewordsUncorrectable Codewords

CM Error Codewords
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
3768875779
558882678
558884645
558891699
558914759
558928593
558941625
3406198684
3236949179
5558170
3619299832
3985225121
559040104
559044561
559031257
559054388
559074424
559083013
559086808
559098652
559172339
559161866
559111913
528547130
559174483
559159617
485001240
523183824
559203332
559208511
559224495
559232090
2410402286
3768875779
1152536868
2836
549
349
291
265
299
783220039
668857830
145826214
542347332
312775175
1504
1500
1205
1899
1076
969
404
323
638
556
21099
4442
1550
8194
42430
2399
120
167
122
94
2064508512
1152536868
14043
61
49
37
36
40
28
619192981
1438493814
761433894
1345615448
519962455
83
76
186
2559
335
186
64
90
98
99
26934
7651
52
14676
108537
2818
75
59
50
19
5493
14043

 

 

Re: Only receiving 1/3 of 1.5 Gbps Speeds

BlueJays16
I plan to stick around
 
IndexLock StatusFrequencySNRPower LevelModulation
Downstream
Channel Bonding Value
20
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
25
26
27
28
29
30
31
32
34
33
34
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
Locked
693 MHz
279 MHz
579 MHz
585 MHz
591 MHz
597 MHz
603 MHz
609 MHz
615 MHz
621 MHz
633 MHz
639 MHz
645 MHz
651 MHz
657 MHz
663 MHz
669 MHz
675 MHz
681 MHz
687 MHz
699 MHz
705 MHz
711 MHz
717 MHz
723 MHz
825 MHz
831 MHz
837 MHz
843 MHz
849 MHz
855 MHz
861 MHz
216 MHz
350000000
216000000
39.3 dB
41.9 dB
40.2 dB
40.2 dB
40.1 dB
40.2 dB
40.3 dB
40.0 dB
34.5 dB
0.0 dB
0.0 dB
38.8 dB
38.9 dB
39.3 dB
39.1 dB
39.1 dB
39.3 dB
38.1 dB
38.8 dB
39.0 dB
38.9 dB
39.0 dB
39.2 dB
39.3 dB
39.0 dB
39.9 dB
38.7 dB
39.6 dB
39.9 dB
40.2 dB
40.2 dB
40.4 dB
40.8 dB
40.8 dB
40.8 dB
-6.6 dBmV
0.6 dBmV
-4.9 dBmV
-5.2 dBmV
-5.3 dBmV
-5.2 dBmV
-4.7 dBmV
-5.4 dBmV
-5.7 dBmV
-5.8 dBmV
-6.6 dBmV
-6.5 dBmV
-6.7 dBmV
-6.3 dBmV
-6.7 dBmV
-6.6 dBmV
-6.5 dBmV
-6.8 dBmV
-7.3 dBmV
-7.0 dBmV
-7.1 dBmV
-7.0 dBmV
-6.5 dBmV
-6.1 dBmV
-5.9 dBmV
-4.7 dBmV
-5.2 dBmV
-5.3 dBmV
-5.0 dBmV
-4.2 dBmV
-4.2 dBmV
-3.9 dBmV
0.5 dBmV
-3.3 dBmV
0.5 dBmV
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
256 QAM
OFDM
OFDM
OFDM

Re: Only receiving 1/3 of 1.5 Gbps Speeds

asamxia
I've been here awhile

I'd like to see any progress on this topic.

Re: Only receiving 1/3 of 1.5 Gbps Speeds

-G-
Resident Expert
Resident Expert

@asamxia wrote:

I'd like to see any progress on this topic.


Are you experiencing this same problem as well or are you considering upgrading your service and have concerns?

 

I don't know why some people are only getting a fraction of the speeds that they are paying for but it's not a universal problem affecting all customers.  I subscribe to Ignite 1.5 Gigabit cable Internet (not FTTH) and I get download speeds that exceed 1.8 Gb/s and upload speeds that exceed 50 Mb/s.

Re: Only receiving 1/3 of 1.5 Gbps Speeds

asamxia
I've been here awhile

I have been experiencing the same problem with my internet connection. I had been subscribed to the 500u plan for several years and was consistently getting around 500 Mbps download speed and around 20Mbps upload speed. However, in April, I noticed that the upload speed became unacceptably slow, especially during the day when it dropped to less than 1 Mbps. I contacted a tech who replaced my modem with a new white modem (Gen 2), and I also upgraded my plan to 1.5G, hoping for faster internet speeds at the same price as the 500u plan.

Unfortunately, after the upgrade, I realized that this time my download speed was only ranging between 200 to 300 Mbps, which is slower than what I used to have with the 500u plan. I called another tech to address the issue, but he quickly concluded that the problem was with my Ethernet cable, suggesting that I replace it. The technician's visit lasted only 20 minutes, and he left without further investigation or explanation.
I am using a 2014 iMac with a 10/100/1000BASE-T Gigabit Ethernet card, and I use a CAT 6 cable for my internet connection. It is worth noting that I reside in downtown Toronto, which is in close proximity to the Rogers headquarters. Despite these factors, I am still experiencing the persisting issue with my internet speed.

I will continue contacting Rogers to fix this issue, and just curious to see what will happen since it seems there's no positive result or feedback from this topic here.

 

Re: Only receiving 1/3 of 1.5 Gbps Speeds

MyAxman
I plan to stick around
Bell installed fibre to the condo units where as Rogers has fibre to the Com rooms abd coax to units. I called Rogers to find out when their fibre will reach condo units. I was promised a call within a week its been 10 days.

Re: Only receiving 1/3 of 1.5 Gbps Speeds

@MyAxman the response to your query might take some time as an upgrade to the buildings communications infrastructure might require an agreement with the provider, in this case Rogers, and the building owners, in your case the Condo Board??.  That infrastructure upgrade is either the responsibility of the building owner, or, done thru an agreement with the provider, which usually means some type of bulk agreement for the building.  You might get some answers if you were to approach the person on the condo board who looks after communications infrastructure issues. I don't believe that you're going to find that Rogers will run fibre to the condo units without some type of payback.  

Re: Only receiving 1/3 of 1.5 Gbps Speeds

MyAxman
I plan to stick around
Im president of the BOD. i approved Rogers installation of fibre to the communications room Bell offered to install fibre to each condo unit which is underway. When i inquiredcabout Rogers next step i was promised a call back

Re: Only receiving 1/3 of 1.5 Gbps Speeds

Ah, ok, you're the boss.  What did Bell want in terms of payback for the fibre install, if you're allowed to say??

Re: Only receiving 1/3 of 1.5 Gbps Speeds

MyAxman
I plan to stick around
No cost to corporation. 7000 residents in complex. They even paid for security

Re: Only receiving 1/3 of 1.5 Gbps Speeds

gd8
I've been around

this 1.5gb internet is a joke. since I switched from 500mbps to 1.5g, I get at most 420 mbps. most of the time it is around 100mbps if not lower. 2 technicians came to the house, they changed all the external cables. no change in speed. I was getting more on a 500mbps for less money. what a scam

Re: Only receiving 1/3 of 1.5 Gbps Speeds

BlueJays16
I plan to stick around

FYI, my issues have finally been resolved.  They ran a new line to my house.  There was some noise on the line coming to my house.   You can see I'm getting 1500+ on my speedtest on Asus Merlin that is ran every 3 hours. 

 

 
 

rogers_speedtest.jpg

Re: Only receiving 1/3 of 1.5 Gbps Speeds

Hello, @gd8 

 

Its disappointing to hear about the speed issues you are facing. We definitely want to help you get the speeds you are paying for.

 

We'll need a few more details before we can determine what is causing the slow speeds.

 

  • Are your devices connected via Ethernet or WiFi?
  • Are all of your devices showing the same speeds?
  • What speeds were you seeing on your 500 Mbps plan?

 

Please follow the steps here to provide us with your signal levels table so we and the community can review your signal levels.

 

We look forward to reviewing your results.

 

RogersTony

Re: Only receiving 1/3 of 1.5 Gbps Speeds

n8clarky
I've been around
Lucky you!
I'm signed up for 1.5 gigs as well, but only getting 60mbs on wifi and 200 mbs wired

Re: Only receiving 1/3 of 1.5 Gbps Speeds

57
Resident Expert
Resident Expert

@n8clarky wrote: I'm signed up for 1.5 gigs as well, but only getting 60mbs on wifi and 200 mbs wired

Please check out the following linked post and the posts that follow on why you may be seeing slow speeds and what you can do about it:

 

https://communityforums.rogers.com/t5/Internet/Slow-Speeds/m-p/510588#M75402

 

There's also plenty of discussion on the topic earlier in this thread.

Re: Only receiving 1/3 of 1.5 Gbps Speeds

Rb6
I've been around

This issue is with the connection to the XB7 modem.   It needs to have control flow enabled on the port it's attached to the switch.  The auto detect connection get the 2.5g right but for some reason the control flow remain disabled and this need to be enabled.   

I'm luck because I have a XS512EM switch and I'm able to enabled this feature on the port that the XB7 modem is connected to on the switch. 

Before enabling this you get drop in speed 400 down, after you'll get what you would expect.

 

 

Topic Stats
  • 82 replies
  • 14899 views
  • 16 Likes
  • 15 in conversation