Check this out: https://communityforums.rogers.com/t5/Ignite-TV/Using-the-Ignite-TV-Modem-Gateway-in-Bridge-Mode/m-p/461778#M6856 Anytime I have slow speeds, I repeat the steps. Thankfully only 2 or 3 times in the last year.If you ever power cycle th...
Thanks for the replies. Will group mine all in this post: The Automatic QoS is only enabled by default if connection speeds are under 300Mbps. I set mine up as 999Mbps/30Mbps. I specifially checked the option was disabled as well. Speed tests were do...
For IPv6, I can setup the WAN DHCPv6 side with 64 delegation, but not sure what to use for the LAN side. Here is the settings window:https://i.imgur.com/aSXn00W.jpg From the other samples posted in Step 1, seem I just need check the Enable IPv6 Rout...
@-G- wrote:...To be honest, I was cringing when I read this. Regardless of what anybody else might tell you, I do not think that this is a good idea. I doubt that the Comcast developers have even tried to harden their set-top box code enough for th...
@KoN1 wrote: You don't have to go so far as disconnecting everything just go to the Modem, disable bridged mode restart it and then re-enable bridged mode. I found that after about a week or so the speed drops again so I have to do the same process a...
