Internet
Got questions about your modem, router, speeds or WiFi?
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Ethernet Connection

Hi, I have a question about my home internet connection.  I have my Rogers modem on my main floor which is connected to our tv and we use for wifi and I often connect an ethernet cable to it for my laptop to get a better video conference connection.I...

HeatherA22 by I've been around
  • 1965 Views
  • 2 replies
  • 0 likes

Resolved! How to Use Mesh WiFi6 as Main Router

Hi,I have a WiFi Gateway (XB6) Rogers ignite Router. I recently bought 3 pack Linksys AX4200 WiFi6 mesh routers. Is it possible that I can use Linksys WiFi6 as the main router (Bestbuy Sales person told me so)? The Rogers router needs to be in bridge...

Mathrania by I've been here awhile
  • 6047 Views
  • 4 replies
  • 0 likes

Great Wi-Fi Range on Ignite TV Gateway (XB6)

Is it just me or is the wifi range on the Ignite WiFi Gateway (XB6) modem friggin amazing!?!?Before switched to rogers I was with Start Communications and my set up with them was a Hitron modem, no wifi, going to a TP Link Archer C7 wifi router with ...

Jascmu by I've been here awhile
  • 8500 Views
  • 5 replies
  • 2 likes

Resolved! MTU size on router

Hi,   Is there a recommended value for WAN MTU size in router configuration? Should it be set to 1472 or 1500?   Thanks!     ***Added Labels***

vikas-arora by I plan to stick around
  • 6723 Views
  • 3 replies
  • 0 likes

Wi-Fi 6 - AX

Anyone know if there's any update on whether Roger modem/routers will be updated to include WiFi 6 (ax)       ***Added Labels***

Ehonk by I've been around
  • 12264 Views
  • 10 replies
  • 1 likes

Network setup using both XB6 dual ports?

Hello, I'm trying to get both ports on the back of the Arris XB6 to see each other over network? Is this even possible??? I would like to be able to access my movie collection from the DS415 from port 2 over to my Nvidia shield or Mede8er 800X3D box....

vincez28 by I've been here awhile
  • 2068 Views
  • 6 replies
  • 0 likes

Can't detect my WiFi router (Hitron CGN2)

Hi there, My phone and laptop cannot "see" my router. They both can see other connections in the building. I've gone into the settings, checked to see if the primary SSID was hidden. I know the settings on the router are set to factory settings (othe...

Rainwalker by I plan to stick around
  • 3673 Views
  • 6 replies
  • 0 likes

UDP protocol on an Arris XB6 Modem

I usually download different *nix based OS (ISO image) for testing and scripting... Since I upgraded to ignite I've been getting file errors on all ISO image. I do understand there is no error correcting on the UDP protocol but I never had this much ...

1mthome by I plan to stick around
  • 1508 Views
  • 4 replies
  • 0 likes

Two Connnected Condos wired on same network?

We live in two connected condo units (door cut through years before we bought them).   We requie a single wired network for both condos.  We have tried wireless repetaerrouterss cheap and expensive. Currently have two separate networks. Ideally would...

DAT42 by I've been around
  • 1529 Views
  • 2 replies
  • 0 likes

Resolved! Can't see wireless access points on Ignite network

My Ignite system is up and running in Gateway mode. My 3 TV boxes are successsfully connected via ethernet cabling and the wifi in my Ignite modem is turned off. I have 2 ethernet wired TP-Link wifi access point modems connected and working but they ...

johnrm by I plan to stick around
  • 2434 Views
  • 4 replies
  • 0 likes

Ignite TV - Home Phone & Own Router Questions

My parents are looking at switching to Ignite TV/Internet/Home phone, but were told that the home phone works differently than their existing non-Ignite Rogers Home Phone.   Their current setup has their modem in bridge mode, and a separate router (I...

dassub by I plan to stick around
  • 2964 Views
  • 4 replies
  • 0 likes

Configuring IPv6 on Orbi Mesh

Hi,   I just upgraded my Netgear R7000 to the Orbi AC3000 ts week. My old router was running a Merlin variant that makes it an ASUS router. The ipv6 configuration is seamless. Now that I have the Orbi, I could not configure the ipv6 properly.  Does a...

jseller by I plan to stick around
  • 3582 Views
  • 2 replies
  • 0 likes

Resolved! Airport Express Losing Connection with Hitron Gigabit Wi-Fi Modem

A couple weeks ago I noticed my modem reboot in the middle of the night and assumed it was a firmware upgrade.  Ever since then, my wifi devices (iPhone, iPads) will occasionally lose connection and regain it after less than 30 seconds (wifi connecti...

_NeilN by I've been here awhile
  • 1413 Views
  • 2 replies
  • 0 likes

Using the Room's Ethernet port to extend the Wifi Signal

Hello,   I currently have the Hitron modem from Rogers broadcasting my wifi at home in the great room. The problem is that the signal is very weak upstairs on the other side of the house. I recently realized that I have Ethernet ports in every room t...

MY20 by I've been around
  • 3120 Views
  • 3 replies
  • 0 likes

Current modem offering for Ignite 150

I have just ordered Ignite 150 internet service.  The self install package will be arriving soon.  But, anyone know what modem is Rogers sending for the Ignite 150?  Should I buy my own instead?  Will that cause compatibility issues? Thank you.     *...

Goozman by I've been around
  • 2820 Views
  • 6 replies
  • 0 likes

IPv4 is not working on Ignite CGM4140COM router

Found certain websites are not accessible recently, since a week ago. Did some troubleshooting and can narrow down the scenario. Whenever the computer wakes up after going sleep, the problem appears. IPv6 websites/services (google, yahoo, etc) are al...

henlau by I've been here awhile
  • 2961 Views
  • 3 replies
  • 0 likes

Resolved! How do I change my default gateway IP address?

So, a big issue here that I hope can be resolved. My small business has its Window Server domain and DHCP set up in the 192.168.100.x  range. There are 20+ devices that use this range, including some set as static IPs, and some port forwards for thin...

dassub by I plan to stick around
  • 7928 Views
  • 11 replies
  • 0 likes

Unstable WiFi Network With a New Laptop

Sorry if a similar case was already posted. I did skim through the forum, but saw nothing that resembles my issues.   I just recently bought a new laptop (HP/Windows 10), and ever since, the internet/WIFI has been unstable. It would be disconnected e...

uruchai by I've been here awhile
  • 2437 Views
  • 4 replies
  • 0 likes

Resolved! Noob Help - Setting up an Asus AC-3200 as a Wireless AP

I have a spare Asus router lying around and would like to use it to extend my Wifi out to the car.  How do I set it up with the CODA?  From what I've garnered so far, I need to change the Asus to AP mode in the settings but apart from that I'm lost a...

X-Nemesis by I plan to stick around
  • 2608 Views
  • 3 replies
  • 0 likes

Is it possible to have two modems in one house hold?

I’m fine paying for the rental of the extra unit if that’s the case. My second computer is 2 floors away from my existing modem and requires a wired connection. I have cable television in this room outfitted with a “NextBox 2.0”? I think? The one wit...

Labels