Internet
Got questions about your modem, router, speeds or WiFi?
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Does anyone know which Ports I can use for my ipcam other than 9000?

I am using Rogers Ignite and trying to configure a few webcams.  However, the cams cannot work with all the same ports.  So I am trying to set Port forwarding to a few other ones.  I think Rogers has block unnecessary ports so my question is, which p...

skwong by I've been around
  • 227 Views
  • 1 replies
  • 0 likes

PPTP

Is it possible setup Rogers ignite for port forwarding AND protocol forwarding for PPTP VPN? may.be use DMZ if there is no other ways?       ***Added Labels***

Fduchun by I've been around
  • 217 Views
  • 1 replies
  • 0 likes

Enable port forward to remote desktop connect

Hi, My Requirement: Setting up port forwarding, so that I can connect my windows laptop from different network when I am outside home using a different laptop using remote desktop option.   1.I setup the port forwarding for a one my Windows laptop us...

Screenshot.jpg error.PNG success_local.PNG

Port forwarding on the ignite router/modem

before you tell me to download the ignite app... no... just no... i shouldn't have to launch an app on my mobile phone to control a setting in my internet router/modem when im already sitting on my computer in my modems admin panel, i didn't have to ...

Ldeforge by I'm here a lot
  • 2465 Views
  • 12 replies
  • 2 likes

Resolved! Port Forwarding

I am perplexed by the complexity of configuring port forwarding on TG4482A. What used to be a simple task of entering the IP address of the destination device and port range now requires an Ignite app and selecting the device from the dropdown list. ...

Arekitect by I plan to stick around
  • 11157 Views
  • 28 replies
  • 3 likes

Got new Router/Modem From Rogers. Portforwarding

So, Port Forwarding became harder now than easier?.  I have to download an ignite app to make it work it seems.Or is there any option i can turn on/off to manage it directly from the website/console? **Labels Added**

Screenshot 2024-04-27 115957.png
AsherGC by I've been around
  • 427 Views
  • 1 replies
  • 0 likes

Port Forwarding not working.

Hello.. suddenly my ports have stopped accepting incoming connections and now I cannot port forward at all. This happened last week and it seems to be carrying on. I have tried factory resetting the gateway and also giving static IPs to my system yet...

Enabling DMZ

Hello, This should be fairly straightforward, tell me what I'm doing wrong?Find my WANIP address using whatismyip.com (done)Open Ignite HomeConnect --> Connect --> View WiFi equipment --> advanced settings --> DMZ --> Select enable (done)Provide IP a...

dbutcher2 by I've been here awhile
  • 2980 Views
  • 6 replies
  • 0 likes

PPPOE username and password

I see on in my ignite gateway menu, an option to put the modem into bridge mode. I was talking to technical support earlier through chat and they told me they don't have the authorization to give me the PPPOE username and password. I'm trying to put ...

JaskaranB by I've been around
  • 950 Views
  • 1 replies
  • 0 likes

Rogers Ignite Portforwarding not Working

Hi, I'm trying to open a couple of ports on my router for my PC for gaming. I tried open the ports on the app  through the phone, it says the ports were opened, but when I check if the ports are open via 'telnet' command in cmd, they say it's closed,...

shrekitnam by I've been around
  • 5440 Views
  • 11 replies
  • 1 likes

Resolved! Access NAS remotely

Original configuration:I had a CODA-4582U modem operating in bridge mode connected to my Synology RT6600ax Router (and others previously).  I have a Synology NAS unit connected via Ethernet cable to the Synology Router and use RAIDRIVE to connect to ...

hectop by I plan to stick around
  • 2895 Views
  • 9 replies
  • 0 likes

Resolved! New Ignite Home Connect app no DMZ or Port Forwarding

Suddenly your newest Ignite Home Connect App version ( Android phone) just released - appears to have NO OPTION for Port Forwarding or DMZ,  as per the previous Build of this App. Is that true? Because-  if it is - scores of serious users will bail f...

Does Rogers block ports 135/445

When running GRC sheilds up, ports 135/445 report as Closed and not Stealth regardless if i use Windows, IOS or Android, I have not configured these ports in any router firewalls.   There are a few old threads about Rogers filtering these ports but n...

JonSnow88 by I plan to stick around
  • 720 Views
  • 2 replies
  • 0 likes

Homeconnect port forwarding and duckdns problem

For a long time, I have used the free domain name using duckdns to access my home Piwigo photo server. recently it does not work any more.Here is what I have configured:Homeconnect on ignite modem:WAN iPv4 address is automatically configured to 99.23...

krist8 by I plan to stick around
  • 657 Views
  • 2 replies
  • 0 likes

Port Forwarding 80,443

I get an error when trying to forward 80&443 TCP to my NAS. Says the ports are already used by "*". What does this mean? I've not had this issue with any other ISP. How can I get these forwarded?   ***EDITED LABELS***

LetsFix by I've been here awhile
  • 1196 Views
  • 5 replies
  • 0 likes

Help with port forwarding

We are trying to set up an old laptop (Windows 7) for port forwarding. We have figured out the change IP address, (192.168.0.201) from the old one, and the Subnet Mask of 255.255.255.0.  We have put in our modem address for the default gateway.  Ques...

daisimai by I plan to stick around
  • 472 Views
  • 1 replies
  • 0 likes

Cant delete or edit a port

I had an old pc that I had setup on port forwarding for a program I use.I now have a new pc, and the home connect app will not let me delete the old pc's port forward. When I click delete port forward it does nothing. I even tried to edit the port # ...

Unable To Access Web Server

I just upgraded my setup to the XB7.  Everything seems to be OK except my web server, which I can no longer access. I have an Apache web server (v2.2 - yeah I know it's old) running on one of my computers.  It only servers some test and pictures o fa...

os3rules by I plan to stick around
  • 2289 Views
  • 8 replies
  • 0 likes
Labels