Internet
Got questions about your modem, router, speeds or WiFi?
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

desk top connection to ignite

my desk top computer is connected by cable to the modem. when i check connections it states it on hold for 30 min. how do i turn off that hold or delay     ***Edited Labels***

barrie by I've been around
  • 134 Views
  • 1 replies
  • 0 likes

PPPOE username and password

I see on in my ignite gateway menu, an option to put the modem into bridge mode. I was talking to technical support earlier through chat and they told me they don't have the authorization to give me the PPPOE username and password. I'm trying to put ...

JaskaranB by I've been around
  • 208 Views
  • 1 replies
  • 0 likes

Connecting Ignite WiFi Pods via Ethernet

Can I connect Rogers Ignite Pods to the Modem via Ethernet to improve connection speed?   The tech who installed my Ignite originally told me if I ran ethernet between the modem and the pods, then any devices connected wirelessly to the pod would hav...

Network Cable Unplugged Error on Ethernet Adapter

 Hello all, I am getting a "Network Cable Unplugged" error on my Ethernet adapter. I am trying to connect my Asus G11CD Desktop to Ignite WiFi Gateway XB7. I had this same issue years ago with an older modem and a gaming friend who was an ISP helped ...

Symphony50 by I plan to stick around
  • 2957 Views
  • 19 replies
  • 0 likes

Wired Setup Using Switches

Good day to all!   I have a question I hope some of you could help me with. Ever since I switched to Ignite and got the XB6 modem, I have to say that our wifi has not been as good as it once was. I use the XB6 for the wifi, with 3 mesh pods (supplied...

snafu1 by I've been here awhile
  • 3058 Views
  • 5 replies
  • 0 likes

Two Connnected Condos wired on same network?

We live in two connected condo units (door cut through years before we bought them).   We requie a single wired network for both condos.  We have tried wireless repetaerrouterss cheap and expensive. Currently have two separate networks. Ideally would...

DAT42 by I've been around
  • 1519 Views
  • 2 replies
  • 0 likes

Settings for USB to Ethernet Adapters

Does anyone know if there are any particular settings to adjust when using USB to Ethernet adapters?   I have a gigabit network card in my laptop which gets 800mbps on the gigabit internet package.   However, when I use the USB to Ethernet adapter on...

nagasur by I plan to stick around
  • 1033 Views
  • 1 replies
  • 0 likes
Labels