I recently got the Rogers ignite service was unable to connect to ethernet from basement to get modem upstairs.Soo I purchased the Starlink 2.5 Moca adapter kitStarLink MoCA 2.5 Ethernet Adapter, Full-Duplex Gigabit Ethernet, 2 Pack (MN2525) https://...
Hello All, I apologize in advance if this has been answered before (I have gone through a ton of posts here and other forums) but had questions that I'd be grateful if answered for complete understanding. I just moved to a townhouse and unfortunate...
Hello,Looking for assistance/ solution to resolve the speed dropI am in 1.5g with Ignite WiFi Gateway modem on Bridge mode. Connectee with 2.5g (4 port)Mini PC with OPNSense.When I connect to main port (2.5g) on the router getting 200-300 Mbps, while...
Hello all. I have changed the CGM4331COM to Bridge Mode and have set my ASUS RT-AX58U to router mode. All seems well. Would someone please be able to help me with the IPv6 settings? I'm not sure if my connection type should be NATIVE or PASSTHROUGH...
I have tried every combination of admin/password, admin/Password, etc etc and nothing works. When it was in gateway mode the default password was 'password'. I had a relative try his bridged XB8 modem by logging into http://10.0.0.1 and he has the sa...
Hey everyone. I am using the 1.5 Gbps package with the new modem (white colour with slanted top) and have a question. Is there a difference in allowable speed when using in bridge mode? I ask because I did a simple test where I ran the modem in d...
Swapped out to XB7 running in bridge mode yesterday. It worked for 14 hours then the modem required a power cycle to get it out of a lockup at 1:30 am. The old modem worked for years in bridge mode with no issues.Checked the event logs in the new mo...
Finally forced to drop Legacy and go to Ignite internet, TV and home phone. Currently using an Asus RT-AX88U and the Hitron in bridge mode. The combination has been flawless. My plan is to continue to use the Asus Router. I have kept my home phone fo...
I have Ignite 1.5 gbs download and 50 gbs upload with a XB7 gateway. With the gateway in bridge mode the fastest result I get is 900 mbs download and 20 mbs upload when connected directly to the 2.5 gbs port on the gateway using a 2.5 gbs adapter.A R...
I have had the legacy TV Box and 1G Internet for the last couple of years and been happy with the service, but now I am getting (economic) pressure to move to the new Ignite service (or switch to someone else). I have been running my own network wi...
I tried a few things: - Direct connect to the Modem - Bridge on - Bridge off - Connected the Modem directly to the incoming coax line lol. I'm using my Unifi gear now, but like I said was all the same going rawdogging on the coax coming into the ho...
Incomplete DHCP4 functionality in Technicolor CGM4140COM: Hi all, I was getting an error message when assigning DHCP reservation for my device, and then when I try to assign it again I get a message that the IP address had been already reserved. Bu...
Hi All, I just got a XB7 router and I want to set it up correctly. I have not yet hooked it up and I don't plan to until I can figure out whether it will work for me or not. Firstly, can I change the Private LAN base address? From what I have r...
I have a XB7 modem from Rogers and an ASUS AX86U router for better coverage.I had put the XB7 into bridge mode and had been running full router mode on my ASUS router and it was running fine until one night, all of the sudden the WAN LED light on my ...
We are long time Rogers customers with a recent switch to Ignite. It would seem that Rogers resets the modem ever few weeks sometime in the night causing our router to lose connection to the modem. We have to factory reset both units to reset the con...
I currently have the Ignite Internet Gigabit 1.5 package using the XB6 (the first ignite modem, Gen1) - I also have a Google Nest mesh setup (Gen 2) - not the Pro but not the first Google Wifi mesh. I have bridged my Rogers modem, and I have 6 Googl...
Been using hitron modem for years. Trying hard to move me to ignite.Can someone confirm if you can bridge ignite to use an asus router AC 5300? ***Edited Labels***
Hey, I was offered a rogers package and I wont get into the sale technique used, but anyway I received the CGM4331COM modem on a Ignite 1500mbps package. I have a rather complicated home network with about 6 computers and a file server that are all w...
Does anyone have experience (good, bad or otherwise) in using an old router as an access point but connecting the AP via a PowerLine adaptor. I have an XB7 (Arris) and a 1.5 GB internet plan but the stability (not strength per se) my wireless conne...
Good afternoon everybody, I have recently gotten a Rogers Ignite Gen3 modem and currently I am getting roughly 100mb/s download speeds while plugged into a network switch in my house. It is my understanding that in order to get faster speeds I wou...