Wireless Knowledge Base

Sort by:
Wi-Fi Calling FAQs     UPDATE:    Your compatible device must have been purchased from Rogers/Fido. If you have a non-Rogers Apple device and no conflicting services, Wi-Fi Calling may work, but we can’t assure that the feature will work properly on your device.   You may experience an error message like this:       What is Wi-Fi Calling? Wi-Fi Calling lets you call and text in more places so you can stay connected with friends and family. You can call and text wherever you have a Wi-Fi connection in places like basements, condos and tall buildings — places where you may have had trouble getting reception before.     Do I need a specific phone or plan to use Wi-Fi Calling? Yes. To use Wi-Fi Calling, you will need the following: An iPhone 5c, 5s, 6 or 6 Plus, 6s and 6s Plus (must be purchased from Rogers or Fido) with iOS 9 or later installed — remember to update your carrier settings when prompted to do so at the end of the OS installation The Wi-Fi Calling feature enabled on your phone Wi-fi Calling Ready Account Voice and Data plan with LTE enabled   Please note that prepaid customers or customers with voice only plans can’t use Wi-Fi Calling.     What type of Wi-Fi connection do I need to use Wi-Fi Calling? To use Wi-Fi Calling, you must have access to a public or private Wi-Fi connection. The connection must meet minimum required download and upload speeds to support voice calls; some Wi-Fi connections may not support Wi-Fi Calling.     Does Wi-Fi Calling use data from my wireless plan? No, Wi-Fi Calling does not use up data from your wireless data plan. When you make a call over Wi-Fi, you will be consuming data over the Wi-Fi connection instead. Internet service charges and overage rates (if applicable) may apply in accordance with your internet service provider. To give you a sense of how much data is used, a one-hour Wi-Fi voice call will consume approximately 75MB of data through a Wi-Fi connection.     How is Wi-Fi Calling billed when I am in Canada? Incoming calls and text or picture messages received over Wi-Fi Calling while in Canada will be deducted from the airtime and messaging limits associated with your wireless plan. Outgoing calls and text or picture messages sent over Wi-Fi Calling while in Canada will be billed as follows: Calls/texts to Canadian numberswill be deducted from the airtime and messaging limits associated with your wireless plan, and no long distance charges will apply. If you exceed your monthly plan limits, overage rates and/or current Pay-Per-Use wireless rates will apply. Calls/texts to non-Canadian numberswill be billed according to the rates outlined in your wireless plan or current Pay-Per-Use long distance wireless rates.   Please note: You may incur additional long distance charges and/or international text or picture message charges if your VPN, DNS or internet provider is set to a country outside Canada.      How is Wi-Fi Calling billed when I am travelling outside of Canada? If you are using Wi-Fi Calling while outside of Canada, the following will be deducted from your wireless plan without incurring any long distance or roaming charges: Incoming calls and text or picture messages received from anywhere in the world Outgoing calls and text or picture messages made or sent to a Canadian number   Roaming and/or long distance charges will vary depending on the roaming option you have on your account. If you have: Roam Like Home TM   Outgoing Wi-Fi Calling calls or text or picture messages made to a non-Canadian number will incur the Roam Like Home daily charge. If you have already incurred this charge, then all outgoing Wi-Fi Calling calls and text or picture messages made or sent within that 24-hour period will be deducted from the Roam Like Home allocation.   If you have a Travel Pack or other roaming add-on, all outgoing Wi-Fi Calling calls, text or picture messages to a non-Canadian number will be deducted from the limit associated with your Travel Pack or roaming add-on. If you exceed your limit, overage rates outlined in your Travel Pack or roaming add-on will apply.   If you do not have Roam Like Home, or a Travel Pack or roaming add-on, your outgoing Wi-Fi Calling calls, and text or picture messages to a non-Canadian number will be billed according to roaming Pay-Per-Use rates.     What happens if I try to make an emergency Wi-Fi call to 9-1-1 while travelling within Canada and the U.S.? If you plan on using Wi-Fi Calling while travelling throughout Canada, make sure to update the emergency address in your phone’s settings, as that’s the address that will be given to emergency services if you call 9-1-1. While using Wi-Fi Calling in the U.S., you may be able to call 9-1-1, however, we do not support U.S. emergency addresses so you will need to verbally tell the dispatcher where the emergency is located. We recommend making emergency calls over a mobile network.     What happens if I try to make an emergency Wi-Fi call to 9-1-1 while outside of Canada and the U.S.? Calls made to emergency services while using Wi-Fi Calling outside of Canada and the U.S. won’t be connected. You can make emergency calls outside of Canada and the U.S. only when they’re made over a mobile network.     How do I switch from using Wi-Fi Calling to a mobile network and vice versa? While in Canada, your phone will automatically connect to a mobile network instead of Wi-Fi Calling if both are available. However, while roaming, your phone will automatically connect to Wi-Fi Calling instead of any mobile network if both are available. You will need to remain in your Wi-Fi or mobile network’s range in order to continue your call; if you move between the two connections, the call will be disconnected. Visit   rogers.com/coverage to see where you are covered by our mobile network.     Are there any services that will not work with Wi-Fi Calling? Customers with select features and services, including any of the following, will not have access to Wi-Fi Calling: Data blocking Ringback tunes Advanced Call Manager Teletypewriter Rogers One Number TM   You’ll need to remove these features if you wish to enable Wi-Fi Calling on a compatible phone. To get access to Wi-Fi Calling or to learn more, please reach out to us here in the Community.     Do location-based calls work with Wi-Fi Calling? Some location-based calls may not work if you’re using Wi-Fi Calling when you’re outside your phone’s local calling area. Your phone will assume that you’re making a call from your phone’s local calling area. These calls include 3-1-1 (City Services); 5-1-1 (Traffic Reporting) and 8-1-1 (Health Services).     What if I am having trouble activating the Wi-Fi Calling feature on my device? If you have trouble activating the Wi-Fi Calling feature, try using Apple’s   support page   or reach out to us here in the Community.     How do I turn on Wi-Fi Calling? Wi-Fi Calling is easy to use and simple to set up. Go into your phone settings and do the following:   Select   Settings Select   Phone       Turn onWi-Fi Calling. Follow the on screen instructions if it is your first time doing this.         The status bar will display “WiFi Rogers” when Wi-Fi Calling is ready to use.
View full article
  Hey Community!   We promised you that we were baking something sweet into your   LG G4   and the day has come!   As of July 21st, Wi-Fi calling for Android will be available on the   LG G4.   Other Samsung and LG Wi-Fi capable devices will be added throughout the year. Stay tuned!   Want to know more about Android Wi-Fi Calling and Eligibilities? Check out the   Rogers Wi-Fi Calling FAQs     LG Wi-Fi Calling: OnBoarding "How To"   On your home screen press “Phone”.       Press “More” in the top right corner of the screen.     Press “Call Settings”.     Press “Wi-Fi Calling”.     Press the link below the Wi-Fi Calling toggle switch to register for Wi-Fi Calling.     Note:   If you are connected to Wi-Fi, we need to verify your phone number through the following steps: Enter Phone Number and press “Get Verification Code” to receive an SMS with your Verification Code Input the Verification Code and press “Submit”.       Accept Terms and Conditions.     Enter your Emergency Address and press “Continue”.     Confirm your Emergency Address.           You will receive an SMS confirming when your registration is complete.     Go back to your Call Settings, (from the home screen, press “Phone”, “More”, “Call Settings”) and toggle the Wi-Fi Calling switch to the ON position.       You’re all set to go. All of your calls and texts will go over Wi-Fi when you are connected to a Wi-Fi network.
View full article
  Hey Community!   We promised you that we were baking something sweet into our Marshmallow 6.0.1 OS update to your Samsung Galaxy Note 5   and the day has come!   As of May 31st, Wi-Fi calling for Android will be available on the   Samsung Note 5.   Later this summer, we plan on launching Android Wi-Fi calling to the LG G4 as well. Other Samsung and LG Wi-Fi capable devices will be added throughout the year. Stay tuned!    Edit* As of June 15th, Samsung Galaxy S6 Edge Plus   will have Wi-fi Calling enabled.   Samsung Wi-Fi Calling: OnBoarding "How To"     On Samsung main page, press the icon: “Phone”     On the “Phone” page, press the “MORE” menu on the upper right of the screen     Press the “Settings” menu option to go to the “Call Settings” page.     On the “Call Settings” page, go to the bottom of the page and press the “Wi-Fi Calling” option.     On the “Wi-Fi Calling” page, click on the registration link to start the onboarding     Enter a valid wireless phone number in the field: “Wireless Phone Number”.         Press the button: “Get Verification Code”     You will receive the Phone Verification Code by SMS.       Enter the Verification Code received by SMS in the field: “Please enter the verification Code”.       Press: “Submit"       Accept Terms & Conditions by pressing the button: “Agree”       Enter the 9-1-1 Emergency Address in the fields: Country (Select Country) First Name Last Name Address (Street Number)      (Street Name)      (Unit/Floor Number) City Province Postal Code   Press on the button “Continue”.       Wait for address validation: “Validating Wi-Fi Calling Address"       Confirm the 9-1-1 Emergency Address by pressing “Use this address”       “Provisioning in progress” Page will appear for few seconds.     On the final page close the onboarding portal and return to device.     Wait for the confirmation SMS upon provisioning completion.     Once SMS is received, go back to the “Wi-Fi Calling” page and turn the Wi-Fi calling toggle to “ON”.     Wi-Fi Calling icon will appear on the phone’s status bar, indicating that Wi-Fi Calling is connected and ready for use.
View full article
  Wi-Fi Calling lets you make and receive phone calls, plus send and receive text messages, wherever you have a Wi-Fi connection.   Looking to set up the Wi-Fi Calling feature on your phone? Do you have a compatible iOS device? Well you are in luck.   Check out this helpful How To video to learn how.     Steps: First, make sure your iPhone is connected to a Wi-Fi network.  Tap the Settings icon, scroll down then tap the Phone icon. Under Calls, tap Wi-Fi Calling and slide the "Wi-Fi Calling on This iPhone" switch to the On position. And you’re done! Wi-Fi calling is now ready to use
View full article
  What is   Rogers ™  Wi-Fi Calling? Wi-Fi Calling lets you make and receive phone calls, plus send and receive messages, wherever you have a Wi-Fi connection in places like basements, condos and tall buildings. With Rogers, you’re connected wherever your day takes you.   How do I turn on Wi-Fi Calling? Wi-Fi Calling is easy to use and simple to set up.   For Apple devices, go into your phone settings and do the following: Select Settings Select  Select Wi-Fi Calling Turn on Wi-Fi Calling Follow the on screen instructions if it is your first time doing this. The status bar will display “Rogers Wi-Fi” when Wi-Fi Calling is ready to use.   For Samsung devices, go into your phone settings and do the following: On the device home page, press the “Phone” icon Select “More” > Settings > Wi-Fi Calling If your number is not registered to Wi-Fi Calling, click the registration link and follow setup process Return to the Wi-Fi Calling page and turn the Wi-Fi Calling toggle to ON. The status bar will display the Wi-Fi Calling icon when Wi-Fi Calling is ready to use.   Do I need a specific device or plan to use Wi-Fi Calling? Yes. To use Wi-Fi Calling, you will need the following: A monthly postpaid voice and LTE data wireless plan (prepaid customers are not eligible) An LTE SIM installed in your device A compatible Rogers device, including one of the following: iPhone 5c, 5s, 6 or 6 Plus, 6s, 6s Plus or SE with iOS 9 or later installed — remember to update your carrier settings when prompted to do so at the end of the OS installation Samsung Note 5 with software version 6.0.1 or later installed. (other Android devices coming soon) LG G4 with 6.0 or later installed The Wi-Fi Calling feature enabled on your device   Your compatible device must have been purchased from Rogers. If you have a non-Rogers Apple device and no conflicting services, Wi-Fi Calling may work, but we can’t assure that the feature will work properly on your device.   If you have a non-Rogers Android device, Wi-Fi Calling will not work   What type of Wi-Fi connection do I need to use Wi-Fi Calling? To use Wi-Fi Calling, you need access to a public or private Wi-Fi connection. The connection must meet minimum required download and upload speeds to support voice calls. Some Wi-Fi connections may not support Wi-Fi Calling.   Does Wi-Fi Calling use data from my wireless plan? No, Wi-Fi Calling does not use up data from your wireless data plan. When you make a call over Wi-Fi, you will be consuming data over the Wi-Fi connection instead. Internet service charges and overage rates (if applicable) apply in accordance with your internet service provider.   To give you a sense of how much internet data is used, a one-hour Wi-Fi voice call will consume approximately 75MB of data over a Wi-Fi connection.   How is Wi-Fi Calling billed when I am in Canada? Incoming calls and messages received over Wi-Fi Calling while in Canada will be deducted from the airtime and messaging limits included in your wireless plan.   Outgoing calls and messages sent over Wi-Fi Calling while in Canada will be billed as follows: Calls/Messages to Canadian numbers   will be deducted from the airtime and messaging limits included in your wireless plan, and no long distance charges will apply. If you exceed your monthly plan limits, overage rates and/or current pay-per-use wireless rates apply. Calls/Messages to non-Canadian numbers   will be billed according to the rates outlined in your wireless plan or current pay-per-use wireless rates.   Note: You may incur additional long distance charges and/or international message charges if your VPN, DNS or internet provider is set to a country outside Canada.    How is Wi-Fi Calling billed when I am travelling outside of Canada? If you are using Wi-Fi Calling while outside of Canada, the following will be deducted from your airtime and messaging limits included in your wireless plan without incurring any long distance or roaming charges: Incoming calls and messages received from anywhere in the world Outgoing calls and messages made or sent by you to a Canadian number   Roaming and/or long distance charges will vary depending on the roaming option you have on your account. If you have: Roam Like Home TM : Outgoing Wi-Fi calls or messages made to a non-Canadian number will incur the Roam Like Home daily charge. If you have already incurred this charge, then all outgoing Wi-Fi calls and messages made or sent within that 24-hour period will be Roam Like Home-rated. If you have a Travel Pack or other roaming add-on, all outgoing Wi-Fi calls or messages to a non-Canadian number will be deducted from the limit included in your Travel Pack or roaming add-on. If you exceed your limit, overage rates outlined in your Travel Pack or roaming add-on apply.   If you do not have Roam Like Home or a Travel Pack or roaming add-on, your outgoing Wi-Fi calls and messages to a non-Canadian number will be billed according to roaming pay-per-use rates.   Can I make an emergency Wi-Fi call to 9-1-1 while travelling within Canada or the U.S.? Yes. If you plan on using Wi-Fi Calling while travelling throughout Canada or the U.S., make sure to update your emergency address to your most likely location for your device in your phone’s settings. Your emergency address is the one that will be given to emergency services if you call 9-1-1.   We recommend making emergency calls over a mobile network.   What happens if I try to make an emergency Wi-Fi call while outside of Canada and the U.S.? Calls made to emergency services while using Wi-Fi Calling outside of Canada and the U.S. will not be supported. We recommend making emergency calls over a mobile network.   When will my device use Wi-Fi Calling versus the mobile network? In most cases, when you have access to both the mobile network and Wi-Fi Calling (e.g., you have a Wi-Fi connection that is strong enough to be useable), your device automatically defaults to using Wi-Fi Calling. This applies when you are within Canada and when you are roaming outside of Canada.   For iPhones with iOS 9.1 or later, your device automatically defaults to using Wi-Fi Calling when you have access to both Wi-Fi Calling and the mobile network. However, if you have an older version of iOS, your device will automatically default to using the mobile network when in Canada, and Wi-Fi Calling when roaming outside of Canada.   For Android phones, your device automatically defaults to using Wi-Fi Calling when you have access to both Wi-Fi Calling and the mobile network. However, you may change your settings on your device to switch the default setting to the mobile network.   How do I switch between the Wi-Fi network and the mobile network during a call? In most cases, when you move between Wi-Fi Calling and the mobile network, your call will drop. To ensure your call does not drop, you should remain in your Wi-Fi or mobile network’s range for the duration of the call. However, if you have a VoLTE-enabled device and you are moving between Wi-Fi Calling and our LTE network, your call should not drop. Visit   rogers.com/coverage to see where you are covered by our mobile network.   Are there any wireless service features that will not work with Wi-Fi Calling?   Customers with select features and services, including any of the following, will not have access to Wi-Fi Calling: Data blocking Advanced Call Manager Teletypewriter Rogers One Number TM Alternative Line Service Wireless Priority Common Voicemail UMA Hotspot Datacom CS Data FAX and USSD services   You’ll need to remove these features if you wish to enable Wi-Fi Calling on a compatible phone. To get access to Wi-Fi Calling or to learn more please visit the Rogers Community Forums.   Do location-based calls work with Wi-Fi Calling? Some location-based calls may not work if you’re using Wi-Fi Calling when you’re outside your phone’s local calling area. Your phone will assume that you’re making a call from your phone’s local calling area. These calls include 3-1-1 (City Services); 5-1-1 (Traffic Reporting) and 8-1-1 (Health Services).   What if I am having trouble activating the Wi-Fi Calling feature on my device? If you have trouble activating the Wi-Fi Calling feature please visit the Community Forums.   How can I activate VoLTE on my iPhone 6s or 6s Plus?  If you have already activated Wi-Fi Calling, then you’ll need to go to your settings and turn Wi-Fi Calling off and on again to activate VoLTE services on your device. If you have not yet activated Wi-Fi Calling and want to activate VoLTE, follow these steps: Go to   Settings   and select   Phone. Toggle Wi-Fi Calling to ON. Follow the instructions on your screen if it’s the first time you’re hooking it up.   Remember to make sure you are using the latest version of iOS before activating VoLTE on your device.     Wi-Fi Calling Terms and Conditions
View full article