New Rogers RF remote

[OdiaRaj]

Programming of Volume is different for RF remote and IR remotes are different

For IR Remote - Rogers Atlas Remote

(993) Volume Punch Through

1 TAP the device, (TV, VCR, CABLE, etc.), button - RELEASE
2 PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3 TAP 9 - 9 - 3.
4 TAP the device key you would like the volume to come from. Two blinks.

To unlock volume control for a single device:

1 TAP the device key you wish to unlock (AV1, AV2, etc.) - RELEASE
2 PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
3 TAP 9 - 9 - 3.
4 TAP VOL-. Four blinks.
5 Repeat 1-4 to unlock other devices.

To unlock all volume controls:

1 PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
2 TAP 9 - 9 - 3.
3 TAP VOL+. Four blinks.

For RF Remote - Rogers Champion remote

Programming Volume - Volume--device key/hold setup/Vol+/device key

1. Press Device(cable or TV or audio or DVD) Key Once only
2. Press and hold “SETUP” until Device key blinks 2 times
3. Press Volume + Once
4. Press Device(cable or TV or audio or DVD) Key Once only

[HelpmeAmen]

Just got a new digital box.  I was able to easily find code for that and set it up.  However, I cannot find the code for my tv/dvd combo and have tried all that were listed plus 0000.  It is a Dynex TV which I believe I bought from FutureShop.  Any suggestions.  Thanks

[57]

Try the following, item 3, 4, 7?

http://help.rcn.com/pf/12/webfiles/files/ONNET6907/remotes/champion/index.htm

Item 4 shows the codes, 1463, 1785, 1810, 2049, 2184.

The following links may also be useful:

https://www.urcsupport.com/wp-content/uploads/2016/03/Champion-Plus-Manual-Eng-Span.pdf

https://www.urcsupport.com/rogers

[Buckswana]

To individually unlock volume control for a device, follow the same procedure as the gobal lock, but hit the volume down button instead of up, then the device you want to unlock. So if you've set it to global lock already, you would hold setup until it blinks twice, then volume down, then the device button you want to unlock (TV, DVD, etc.). Worked perfectly for me. You can also reassign a device button the same way as the original Nextbox remotes. I've reassigned my DVD button to control a second TV by doing this. Press the device button you want to reassign. Hold setup until it blinks twice, then enter 992. Press the button you want to change it to (TV in my case), then the button DVD button again. So to change DVD to a 2nd TV control = DVD->Setup->992->TV->DVD. 

[songsparrow]

HEY ALL ROGERS CUSTOMERS LOOKING FOR ANSWER HOW TO MAKE YOUR ROGERS REMOTE CONTROL YOUR SAMSUNG TV VOLUME!!

I am just another customer looking for the same answer - they did not yet provide it on Facebook - one of the sites they referred you all to - but I did just find the answers for our volume issue!! Here is a link to the page:

http://www.hifi-remote.com/forums/viewtopic.php?t=11675

All you do is like with the setup for the power - but a little different. That page offers a variety of options.

Here's what I did.

1. press TV (one blink)
2. press Setup (1blink - then 2 blinks)
3. press 993 (like 991 to control the on/off)
4. press Volume up once (there will be 4 blinks)
5. Now just test to see if volume works - and also it should control your MUTE button.

If my version doesn't work - no worries - go to the link I posted and follow their instructions.

[RogersShaun]

Hello @Buckswana & @songsparrow,

Welcome to the Community Forums, and thanks for your posts.

We love to see you folks sharing tips and tricks, it's what makes the Community a great place to be!

RogersShaun

[Jenamcmahon]

My Rogers remote is lighting up but not responding to my box. Any ideas how to solve?

[OLDYELLR]

@Jenamcmahon If you can't solve the problem, just take it back to your local Rogers store and they will give you a new one.

[57]

---

@Jenamcmahon wrote:

My Rogers remote is lighting up but not responding to my box. Any ideas how to solve?

---

I assume you mean your box is not responding to the remote? Have you pressed the Cable button near the top right and is that the button that lights up when you press other buttons?

[OLDYELLR]

That is a very good point. I keep all my remotes in my chair pocket and never know what button gets pressed accidentally.   I like using my old 5-button Atlas remote and I always make sure I press the CBL button before I press the PWR button if I want to access Cable. With the new RF remote, pressing the WATCH CABLE button should work. To use the Power button instead, you need to make sure to press the CABLE button first (or one of the other device buttons if that's what you want to access).