New Rogers RF remote

Need Help?

That's what we're here for! The goal of the Rogers Community is to help you find answers on everything Rogers. Can't find what you're looking for? Just ask!
cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
I've Been Around
Posts: 1

Re: New Rogers RF remote

I have a URC remote and Netbox. I have tried the solution offered 3x without success. The cable light flashes and then 2x to confirm pairing - but there is no RF pairing.

 

The 'link' referred to in the above post on my ipad does not provide any assistance.

 

What do you suggest?

 

Tks

I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

hi

 

I do not know the model no. of Nextbox you are trying on. Pairing in Rf mode can only be done with 4k box and 9865HD models from Rogers.

 

RF mode will not work with 4642HD,8642HD,8600HD. Some of these boxes are also branded as Nextbox.

 

The procedure is ...

 

Pairing in RF mode--put adapter in pairing mode/press UP arrow, then hold setup until led blinks rapidly/led will blink twice and it will stop-success

 

  1. Press and hold UP arrow first and while holding it, Press and hold SETUP Until Cable button starts flashing
  2. Once paired cable will blink twice and it will stop
  3. Test RF mode, if not working or repeat procedure.
I Plan to Stick Around
Posts: 34

Re: New Rogers RF remote

Hello. I just swapped a broken Atlas URC1056*** remote for a new Champion Plus URC2125B0-BX remote for my NextBox 2.0 PVR and set the audio code to 2061 for a Yamaha RX-V1700 receiver. The only problem after setup, is that now I can't change inputs on the receiver using the number keys (this method worked with the old remote) nor with the Video Input key (after completing the Locking Input Switch setup). Anyone know how I can fix this? Thanks.

Highlighted
I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

First ....

 

You must have a remote with watch cable button at top. If you have remote with red power button on remote, please swap remote at any rogers store and obtain the remote with "Watch Cable" button at top.

 

If you already have the right remote try to repair it..

 

1.  press "cable" button once -- one blink

2. Press "Setup and hold until cable button blinks 2 times

3. Press 9-8-2.

 

Try programming remote in RF mode.

Remember to remain away from box to the extent of 5 feet. 

 

 

I Plan to Stick Around
Posts: 64

Re: New Rogers RF remote

Use Rogers remote to control Roku device

 

I'm planning to purchase a Roku Express and I'm wondering if I can program my Rogers remote to control it versus having to have another remote hanging around. Does anyone know if this is a possibility? Could I connect it via the "DVD" button? Any insights would be greatly appreciated.

I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

Rogers remote will not work with ROKU

 

The EFC (Extended Function code) are different in Roku. The buttons such as Home, info, Play, REW and FF will not work. On and off may work for some old version of ROKU. So I do not feel that universal remote will work for ROKU. I will advice not to play with Rogers Remote.

 

If you lost ROKU remote, you can buy at Amazon. It may cost you up to $10.

I Plan to Stick Around
Posts: 11

Re: New Rogers RF remote

Rogers remote won't control volume

 

Last week my father purchased a 55" Samsung 6 series UHD TV,model UN55KU6290.

 

The TV seems to work well with the old 8642HD box.

When you press the power button on the Rogers remote the picture appears almost instantly.

 

The issue is that the Rogers 5 button remote will not adjust the volume at all.

When you press the volume button the volume bar will appear on the screen and you can move it from 0-100 and back,but it has no effect on the sound.

 

Only the mute works on the Rogers remote.

We have to adjust the volume with the Samsung remote.

 

I tried that procedure where you enter 933 on the remote on both TV and Cable and that didn't work.

The rogers remote would control the volume on the previous Toshiba Regza TV.

 

Does anyone have a solution for this problem?

Thanks.

I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

It looks like that the new remote is not programmed to TV. If this remote has watch Cable button on to... Please follow this procedure............ . If you see teh volume going up on top right had side of TV, Please increase the volume on to 100%.

 

1. Press Tv button once

2. Press and hold "setup" until TV button flashes 2 times.

3. Enter code for samsung which is 0812

4. Press POWER button to test if TV goes off

 

Press cable and test volume.

 

If still the volume is not working try...

 

1.       Press  TV  Key Once only

 

2.       Press and hold "setup" until TV button flashes 2 times.

3.       Press Volume + Once

4.        Press TV key once and TV button should flash 2 times

 

Press cable and check volume.

 

If you still have Old type of remote with Red power button on top...

 

1. Press Tv button once

2. Press and hold "setup" until TV button flashes 2 times.

3. Enter code for samsung which is 0812

4. Press POWER button to test if TV goes off

 

 

Version:1.0 StartHTML:000000267 EndHTML:000002495 StartFragment:000002030 EndFragment:000002463 StartSelection:000002030 EndSelection:000002459 SourceURL:http://communityforums.rogers.com/t5/forums/replypage/board-id/PVR_settop_boxes_remotes/message-id/4...

If still the volume is not working try...

 

1.Press  TV Key Once only

 

2. Press and hold "setup" until TV button flashes 2 times.

3. Press 9-9-3

4. Press TV key once and TV button should flash 2 times

 

Press cable and check volume.

 

This should definitely work

I Plan to Stick Around
Posts: 11

Re: New Rogers RF remote

Thanks for replying.

I'm a little confused.

 

If the Rogers remote is not programmed to the new TV,how is it that I'm able to turn the TV on/off,change channels,access Navigator guide,change picture size and mute the volume with the Rogers remote?

 

I can't adjust the volume with the Rogers remote even thought the volume bar appears on the screen.

 

When I set the TV up I found a Rogers setup guide in a drawer and used the procedure where you punch in code 991 to program the remote.

After finding that the volume wouldn't adjust with the Rogers remote I tried the code 993 procedure with no luck.

 

I have the original remote that came with the 8642HD box.

Remote number is 1056B03.

 

This would be the old remote you refer to with the red power button on top.

I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

The code to program TV is important. Did you used 0812 ??

 

If you have programmed remote in any other way, please use code 0812 or 0702.

 

The volume will work then, otherwise volume may not work