New Rogers RF remote

Need Help?

That's what we're here for! The goal of the Rogers Community is to help you find answers on everything Rogers. Can't find what you're looking for? Just ask!
cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
I've Been Around
Posts: 1

Re: New Rogers RF remote

Is it possible to switch back to ir from rf?
I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

You can de-program the RF mode

 

1. Hold Down-Arrow and CBL will lit-up in fast blinking mode

2. While holding Down-Arrow, hold setup

3. CBL will flash 2 times

 

Remote will be back to IR mode

I've Been Here Awhile
Posts: 2

Re: New Rogers RF remote

Connecting VCR/DVD players

 

Hi - I have a URC-2125BC0-BX remote. I can not seem to any codes to work to communicate with my Citizen C508DVD-BLU.  None of the codes in the setup help guide that came with the remote seem to work. Can I get some help?  

Resident Expert
Resident Expert
Posts: 2,892

Re: New Rogers RF remote


@0redbeard wrote:

Connecting VCR/DVD players

 

Hi - I have a URC-2125BC0-BX remote. I can not seem to any codes to work to communicate with my Citizen C508DVD-BLU.  None of the codes in the setup help guide that came with the remote seem to work. Can I get some help?  


Often "off brand" devices many not be in the database of the remote. Usually the remote has a "search" functionality, whereby you repeatedly press a button to scan every code in the database.  If the code is not in the database, then you're out of luck and may need to look into a fully programmable remote like a Harmony, or use two remotes.



I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

The best way to program DVD or VCR or Blue ray..

 

1. Turn device ON

2. Press DVD once and let it go.

2. Press and hold SETUP, Until the DVD blinks two times.

3. Press and hold OK until the DVD or VCR or Blue Ray goes off.

4. Once Device goes off, release OK button.

5. Press and hold SETUP until DVD blinks two times.

 

If this does not work, citizen at 1-800-663-5954 and ask code for universal remote.

This is the best we can do.

Highlighted
I've Been Here Awhile
Posts: 2

Re: New Rogers RF remote

Hi - Yes, I've tried the search functionality (I tried for several minutes, but it would be nice if the system indicated it has tried all the codes it could). No luck.  I was hoping that someone else with this DVD player had discovered it. I've looked through the codes of various remotes distributed by Rogers in Ottawa, and haven't found any of them work either. 

I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

I  understand that you are trying hard. Now i am giving you the basic code for all DVD players.

 

DVD / Laser Disc 0490, 0503, 0521, 0522, 0533, 0539, 0545, 0558, 0571, 0573, 0591, 0634, 0670, 0672, 0698, 0715, 0741, 0744, 0783, 0820, 0821, 0864, 1506,0023, 0059, 0059, 0128

 

Please note that first digit is "0" in all cases. You can try all these code first and then you can add 1 or 2 or 3 in place of First "0".

 

for example 1490,1503,1521 and so on

                       2490,2503,2521 and so on

                       3490,3503,3521 and so on

 

If this does not work, calling manufacturer is only way out. Sorry for the trouble.

I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

hi

 

May be you can try this.....

 

  

Independent Device for channel -- Press CBL/Press and hold setup/Press LAST

 

In case one wants to operate Changing ch. On Tv also or Customer does not have remote for TV and TV is not on channel 3 or 4.

 

1.       Press “Cable” Button Once

2.       Press and hold “SETUP” until TV blinks 2 times

3.       Press “LAST” button once only.

4.       Cable button will blink four times.

 

To Revert back

 

1.       Press “Cable” Button Once

2.       Press and hold “SETUP” until TV blinks 2 times

3.       Press “CH +” button once only.

4.       Press “Cable” button once only.

 

 

 

Independent Device for Audio -- Press CBL/Press and hold setup/Press Mute

 

 

In case one wants to operate Volume on cable box also

 

  1. Press “Cable” Button Once
  2. Press and hold “SETUP” until TV blinks 2 times
  3. Press “MUTE” button once only.
  4. Cable button will blink four

 

To Revert back

 

  1. Press “TV” Button Once
  2. Press and hold “SETUP” until TV blinks 2 times
  3. Press “VOL +” button once only.
  4. Press “TV” button once only.
I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

Programming Input - Setting Input key--hold setup/Input Key/device key

1. Press “TV” Button Once
2. Press and hold “SETUP” until TV blinks 2 times
3. Press “Video Input” once
4. Press “TV” Button Once
(In case required, it can be programmed for AUDIO mode for changing between audio cord, RCA, Optical, HDMI )
I Plan to Stick Around
Posts: 25

Re: New Rogers RF remote

If you want to put remote in IR mode, some function may not work.
Try this but you will loose RF mode..

1.      Press CBL once.
2.      Press setup and hold it until CBL flashed 2 times.
3.      Enter 981 ..wait  until CBL will flash 4 times, (this will delete all programming on remote).
4.      Press setup and hold it until CBL flashed 2 times.
5.      Enter 982 ..wait  until CBL will flash 4 times.
6.      Press setup and hold it until CBL flashed 2 times.
7.      Press 1877.


After the remote is programmed, there will be some changes..

1.       “Aspect” button will not work.
2.       “Info” button will take customer to Favorite menu.
3.       “Menu” button will directly take customer to settings menu.
4.       “Back” button will work as Info button.
5.       All other buttons will work normal.