HDMI connection resetting

Need Help?

That's what we're here for! The goal of the Rogers Community is to help you find answers on everything Rogers. Can't find what you're looking for? Just ask!
cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Highlighted
I'm Here A Lot
Posts: 5

HDMI connection resetting

 

 

 

 

 

 

***Edited labels***

Solved! Go to Solution.
Resident Expert
Resident Expert
Posts: 13,823

Re: HDMI connection resetting


1502, we will need a LITTLE more info on the problem, to be able to help Smiley Happy

Connection reseting HOW?

Which box are you using?
Have you tried swaping cables?



I'm a Regular
Posts: 214

Re: HDMI connection resetting


@Gdkitty wrote:


1502, we will need a LITTLE more info on the problem, to be able to help Smiley Happy

Connection reseting HOW?

Which box are you using?
Have you tried swaping cables?


Was there something in the first post before? What is the issue?

Resident Expert
Resident Expert
Posts: 13,823

Re: HDMI connection resetting

we dont know Smiley Tongue



I'm Here A Lot
Posts: 5

HDMI for Next B 3.0

I have had three failures of the HDMI signal from 3 different boxes. This becomes very painful to have to keep changing units.

 

Does anyone have any idea how to reset the HDMI output. 

 

The guy at the rogers store said I'm the only one he has seen with this problem

Resident Expert
Resident Expert
Posts: 13,823

Re: HDMI for Next B 3.0

Failure how?
Picture is cutting out?

What do you have your OUTPUT setting set as on the NB3?

If its set to 1080p, try changing it back to 1080i.. some people have had issues with the output when on 1080p.



I'm Here A Lot
Posts: 5

Re: HDMI for Next B 3.0

No video at all on HDMI. I.ve gone through 5 boxes. They were on 1080p. I've switched to 1080i. Thanks..

 

Rogers is no help at all.

Resident Expert
Resident Expert
Posts: 13,823

Re: HDMI connection resetting

I just finally got mine. Plugged in and seemed to work right away on hdmi, I think defaulted to 720 when it booted up.

Box first time took a good 20+ mins, multiple reboots, with no hdmi display, but once that finalized, outputed fine.


I'm Here A Lot
Posts: 5

Re: HDMI connection resetting

Mine always booted up with HDMI 720. I switched to 1080P and some of them lasted a week two of them less than a day.

 

I'm on 1080i now and only time will tell.

 

I also have a problem with the boxes rebooting for no apparent reason. Just happened at 9:30 PM with a new box I got today. It came back up with HDMI intact.

I'm a Trusted Contributor
Posts: 557

Re: HDMI connection resetting

It sounds to me like something is mismatched...output is not compatible with the input on the next appliance, or your HDMI cables are not good.

Also check that your power coming in is steady, i.e. not fluctuating wildly up and down as that would cause failures, and not getting interrupted, as in a loose power plug.

 

Also I hope the cable guy checked the signal strength coming into your place?

 

Nobody normally needs to go through so many boxes like that.

 

Peter
Toronto, Downtown

Peter
Toronto