Just curious, I have 2 (soon to be 3) cameras monitoring my house. I see that Rogers has introduced 24/7 monitoring if I purchase a 64GB card. I have a couple questions:
Does it need to be the card purchased from rogers?
Is it limited to just 64GB?
most importantly, Can I record multiple cameras? It would be a pretty silly feature if I could only record 24/7 from one camera.
You can use any Class 10 64GB memory card which you can get anywhere as long as its a Class 10.
From what i know its limited to a 64GB memory card as i put one in last week & it worked but a 128GB did not work.
Hopefully Rogers updates it to work with a 128GB class 10 card.
I wanted to chime in and give additional information as @Meowmix stated.
I myself am using a 64GB card (class 10) using the iCam1000 (Indoor/Outdoor) extra I had laying around (since I got iCam2000/iCam2 now for main use).
For the information about for multiple cameras or single camera.
It can be found on our website: Here (Click "Hardware tab)
Officially a 64GB is recommended, 'some' 128GB cards do work however it can not exceed 7 day/24hr limit. (Max recording can be done up to 1 week)
Also note, Micro-SD cards contained within an adaptor will not work.
(They were tested as not, if it works for you great but corruption may occur, same with 128GB as the limitation is to do with the touchpad)
Multiple cameras are not available currently at this time, only information readily available is the launch for one camera able to work with TVR.
Hope this helps and clarifies few things,
do I need to do something special to the sdcard? I purchased a lexar 64gb class10 card (not an adapter card) and it tells me to stiill insert a new card.
Should i reformat it?