Thanks @Gdkitty for the detailed response. Frustrating in the least but I guess those are my options: either set it and it record what it records (then sift through) or don't (and potentially miss something). I get that this is sensitivity based and that there's no real way to set that.
Thanks @RogersTony as well for your suggestions. I actually tried playing with the phone app prior to posting this and, when I moved the sensitivity "down", it actually started recording more frequently. What's happening is a couple of things:
1) we have a huge tree on our front lawn which casts a shadow that is "moving" and I don't think the camera is smart enough to realize it's a tree instead of a person or animal.
2) we have a hanging basket on a column in front of where the camera is which moves with the wind; if there's a good gust, it moves and I think that's tripping the camera to record, and
3) there's a sun shadow that gets cast onto the wall throughout the morning with the sun hitting it. When this moves enough (or shows movement in the reflection), this too is tripping up the camera.
I'm going to try the touchscreen method when I'm home later on to see if it's any better/different from my experience with the app. My test with the app yesterday went from Person/Dog (large) to Person/Cat -- I'm sure moving to Person/Dog (small) would yield more recordings, no?
I'll update further later today or tomorrow. Thanks again!
When we first got our rogers system.. we were continually having false alarms with the motion detectors.
Would check the camara.. and nothing there.. not even the cats setting it off.
What was it? There was the light coming through the front window, reflecting through the fish tank and was triggering a 'heat spot' which was triggering the motion detector.
A set of blinds fixed my issues there.. but not as easy outside.
For my outdoor camaras now, I am using ARLO ones (and just the rogers inside) and had to play with the settings even on them, to get it in a decent state.
It doesnt pick up the tree movement, etc anymore.. but will sometimes loose the first second or so when someone comes into view, as its then realizing it IS a person.
Hello again, @bla2342342342
Thanks for reporting this issue!
I have done some testing on my end and we were unable to replicate this. It usually takes about 15 minutes for the 24/7 recordings to update. Can you check the 24/7 recording feed and see if the rules are still causing it to stop recording when the rule triggers?
You should be able to record 24/7 and have the rules trigger simultaneously as they are on different feeds.
Question regarding range. We installed a camera outside on the garage to capture our driveway because there have been a slew of break-ins in our neighbourhood. Two car driveway. The camera will capture video of the car closest to it, but when I stood at our second car, doesn't capture anything. By capture I mean record. I actually stood there and pretended to break into my car lol. I've changed the settings from low to high and it doesn't seem to resolve anything. Is this the expected range?
Question regarding range. ... when I stood at our second car, doesn't capture anything.
@kimmal : Did you walk from the roadway as a thief would, or were you just standing there, perhaps moving a bit? A certain percent of the image needs to be "active/moving" for the motion detector to go off and this often takes a second or so before a recording starts. The cameras also detect motion from side-to-side (across the frame) better then motion coming towards the camera, so placement of a camera can be important.
I suspect the part of the frame that was active on the right was simply larger/more than on the left. I doubt it's a "range" issue but more a "size" issue, which means the further away, the smaller it is. Does the camera capture cars driving by?
The camera does capture cars driving by, but I think that's because it's capturing when they hit the left side of the picture. As for when I acted like a thief would, I actually walked from my front door (not seen by the cam) by the front of the car and then ducked slightly and tried to open the car door, exactly how a thief would act (I assume lol). Fact of the matter is, they probably would try both vehicles and therefore would cross in front of my truck which would probably capture it, but still what if they don't then the camera is useless. I am going to put the continuous recording on at night, but there's no alert there.
Actually having just posted my last post, I do see what you mean about size being a factor as I just got a notification of the garbage truck approaching my house from the left side and it didn't even make it to half way (it had to back up), so your comment about size now makes sense to me. Unfortunately a robber is not the size of a garbage truck, so I'm still a bit disappointed in what I'm seeing. I'll continue to play with it to see if I can get it to a point that it's doing what I want it to do.
If you can move the camera closer to the middle of the driveway/garage, perhaps covering both vehicles "equally", may provide better results? Many times a bit of experimentation can find an acceptable solution...
If someone walked from the roadway directly to the driver's side of the truck, without crossing in front of the truck, the motion detector may not go off then either....? A vehicle thief may or may not go to/past your front door.
He's back! Irish superstar Conor McGregor makes his return to the Octagon on January 18, and he's kicking off 2020 with a welterweight showdown against the man with the most wins in UFC history, Donald "Cowboy" Cerrone. Returning to action for the first time since October 2018 in the main event of UFC 246, the two-division champion from Dublin known as "The Notorious" one wants to make a statement against Albuquerque action hero Cerrone, who has picked up five post-fight performance bonuses in his last five bouts.