Ignite remote Volume Control

[Donhere1953]

I had an issue with the sound on my tv. The box was changed and sound came back. I still have sound but hardly any volume. Has to be at a 100 on the sound to hear it at all but not that loud.

***Edited Labels***

[57]

The IgniteTV remote control doesn't limit the amount of volume you get on any device, it only sends an "up" or "down" (or mute) signal.  Try going to Rogers - Settings - Device Settings - Audio - HDMI Audio Output and select "Stereo" instead of Auto or Expert.

I assume you're connected directly from the Ignite box to the TV via HDMI.  Also check your TV's audio settings to make sure you haven't invoked some sort of special setting like "midnight mode" or something similar which may limit the amount of volume that the TV can put out.

I'm assuming you didn't have this issue before?  What were you using before you had IgniteTV and how were you connected?

[Donhere1953]

I had this issue before and had another issue with ignite but once the box was changed the volume was ok, now it isn't. When you control the volume it does not respond to the sound that much. I will go over these settings again. Thank you for your response.

[57]

1. Can you temporarily hook up a DVD/BD player or something else via HDMI to the same input used by the IgniteTV box to check to see if the TV is the problem?

2. Do you utilize any TV apps like Netflix and do you have the low volume issue with them?

3. Unplug and replug the HDMI cable at both ends a few times to ensure you have a good electrical connection.

[Zdravko1955]

Hi, maybe you could help me? I have new RCA Google TV 65" and i cannot control volume and turn off and on on Rogers remote control. On previous RCA TV 60" i did not have any problem. Thank you very much in advance.

[57]

@Zdravko1955 : Go to the following website.  Click Setup, click TV, then enter the code for your TV

https://www.urcsupport.com/urc_product/rogers-xr15/

Enter code 12746.  If that doesn't work, say you don't know the model number and enter the various codes presented until you get one that controls your TV volume and on/off.