so i believe its been the past 4-5 months that i have been having a problem with my wifi. there are 3 people in my house that use the wifi at the same time and in december january and february there was really no problem at all with speed but i started noticing thing like being disconected from the interne while using wifi with my devices which are laptops and phones. now after being on the phone for an hour with a lady that had no idea what she was talking about kept getting me to check the internet speed which i couldnt because i couldnt be on the internet any longer then 3 mintes before my router would restart she then told me to reset it myself using the usb that the tech had left. after reseting my router the problem was fixed for about 2 weeks and all of our devices were back to disconecting because the router would reboot this problem has since then dissapeared with no explanation but we now have a new problem and that is extremely slow internet while using the wifi when i play online game mainly nhl14 and league of legend i experience extreme amounts of lag but when im connecte through an ethernet cable the lag goes away now i could obviouslyjust connect my laptop and ps3 to my router everytime i want to play but that just takes out of the convienence of being able to play wherever i want in my house i just want to know if there is any way to fix my wifi speed so i dont have to directly hook up to my touter everytime i want to do something.
Solved! Solved! Go to Solution.
Ok, so the Android box is just a small tv receiver box, like the apple tv, with one ethernet port and an HDMI port to connect to the tv? Do I have that correct? I run satellite tv, which connects via HDMI, no apple tv or android box. Just want to make sure I understand this. So, assuming that the Android box is just a small box, can you move that downstairs for test purposes just to see if you run into the same issues? Or do you happen to have another one of these already downstairs which connects via ethernet and runs as it should? This gets back to whether this is a cable network or wifi issue.
My wifi is really slow at home. I have ignite gigbit internet.
I'm getting anywhere from 4MB/s to 80Mb/s connection speed on 2.4ghz and 25MB/s to 125MB/s on 5ghz. (depending on where I am in the house).
My download speeds are ridiculously slow. Tested to download Marvel game from playstore (~150Mb file)...it was downloading at less than 200kbs. I receive attachments on whatsapp, for example picture files ~5mb takes about 2-3mins to receive. This has been tested on multiple devices.
I've tried to bridge mode and get separate router, wifi extenders, called in rogers a few times and even had tech come in a few months ago - he just changed my cable to a "new" one and said to disconnect all splitters if need be and put modem in open area. Yes there is some interference. My modem can only be placed in two spots based on where the connection is. Both places have some interference due to having an av receiver and speakers near by.
However I do not suspect the interference to be that much to a point of complete loss of transmission (which I get in certain parts of the house). I've even tried changing the wifi channels...still not much impact. I've even tried the Mesh Wifi systems.....its maybe helped a bit, but overall still very slow speeds.
Someone told me to check Rx and Tx levels:
Downstream for all channels is between -10dbm (channel 11) and -5dbm (channel 2). SNR is ~38 for all channels
Upstream is: 50dbm and 48dbm
Welcome to the Rogers Community Forums!
I know first hand how frustrating it can be dealing with slow speed issues, especially when it has gotten this bad. Downloading at less than 200KB in 2018 is definitely not right! =(
If you are getting -10 on your downstream channels then the signal levels are too weak and could be the root cause of the issues you are facing. We'd like to run some additional diagnostic tests on our end to see if other users nearby are also affected or if its an isolated issue.
We look forward to your Private Message!
My 2 bedrooms upstairs are having trouble picking up the WiFi connection. I have a white modem that Rogers says is the most up to date model but still having trouble connecting. I am completely computer illiterate and lost lol.
I have the 150u package with the white modem (sorry don’t know the name) in a small house. My sons computer is literally 20 ft away but on the second level with one thin wall in between. No gadgets in the way to interfere. After research I’m learning these modems have terrible range.
I looked online and found a nether nighthawk 5000 and from reading sounds like a great deal at the price I found. Can I use the netgear modem in replacement of the rental? Or somehow link the 2 and put the net gear upstairs?
Sorry for the long read and appreciate any feedback
@Unclefavre, ok, first things first, is to check and change the wifi parameters if necessary. To do that, with a pc or laptop directly connected to the modem via ethernet, log into the modem. Start a web browser and type in the following address into the address bar, without any www or http:
Then hit enter. That should bring up the log in page for the modem. The credentials for the login are:
Username: cusadmin (this cannot be changed)
Password: your current wifi passphrase unless you had previously changed it.
After you have logged into the modem, navigate to the Wireless (up top) ..... Basic Settings tab. There you will see the tabs for the 2.4 and 5 Ghz networks, the WPS and Guest network.
Starting with the 2.4 Ghz tab, check and adjust the network parameters to the following list:
Wireless enabled: On
Wireless Mode: 802.11 n (note if you have any old devices you could set this for 802.11g/n or perhaps 802.11 b/g/n. My recommendation for really old devices is, its time to move on and update those devices.
Channel Bandwidth: 20/40 Mhz, although, for test purposes you could set this to 20 Mhz. In a crowded wifi environment, I would set this for 20 Mhz. It will default to 20 Mhz in a crowded environment.
Wireless channel: AUTO or, to an open channel if one existed, or to the channel that offers the least interference from neighboring routers and modems as seen with a wifi monitoring application listed below.
WPS Enabled: OFF
Network Name (SSID): This should be long and completely random. Since you very rarely ever have to key this into any device, fill the space (32 characters) with random characters. If this is randomized, it will prevent anyone from identifying you or your house. Note that when you set up the modem, you might have made both 2.4 and 5 Ghz network names the same. I highly recommend setting those to different network names so that you know which network any given device is operating on. Laptops for example usually aren't smart enough to change back and forth between networks on their own, so with both network running the same name, you don't know which network the device is running on which makes troubleshooting more difficult than necessary.
Broadcast SSID: On (This broadcasts the network name. In theory with windows only devices and perhaps linux devices well, you can do without, but, Apple devices aren't happy unless they can see the network name in the modem/router broadcast.
WMM(QOS): On This is Windows Multi Media Quality of Service, which uses packet type tags to optimize services to those devices that run multi-media traffic.
Security Mode: WPA-Personal
Auth Mode: WPA2-PSK
Encrypt Mode: AES only
Password: This should also be long and random. The password length is either 63 or 64 characters depending on what type of characters you use. The minimum length for a passphrase should be at least 25 characters. My recommendation is to fill it with random characters. This only becomes painful when you have to key that into a mobile device.
Save the changes.
The reason for the long, random character sets is to prevent a hacker from using precomputed hash tables for the purposes of hacking wifi networks. This doesn't mean that WPA2 is impervious to hacking. Its not, but, brute force attacks take much longer to accomplish. WPA3 Authentication was approved this year, but, its going to be a while before we see this on modems and routers.
Check/set the following 5 Ghz wifi parameters:
Wireless enabled: On
Wireless Mode: 802.11 a/n/ac mixed
Channel Bandwidth: 80 Mhz, although, for test purposes you could set this to 40 Mhz. I'd set 80 Mhz first.
Wireless channel: 149 to 165 Use this higher channel range as it runs higher transmit power levels.
WPS Enabled: OFF
Network Name (SSID): Once again this should be long and completely random.
Broadcast SSID: On
Security Mode: WPA-Personal
Auth Mode: WPA2-PSK
Encrypt Mode: AES only
Password: Again, this should be long and random
Save the changes.
For now, as you've indicated that your not totally familiar with computer operations, I recommend turning off IPV6. There are two computer network address schemes in effect today, IPV4 which has been around forever, and IPV6 which has been around for at least ten years, probably longer.
Navigate to BASIC (top list) .... LAN Setup. change the Router Mode from Dual (IPV4 and IPV6) to IPV4 only. Save the changes. That will take two to three minutes to take effect. Even with that change over, I'd like you to run a modem reboot. Navigate to Admin (top list) .... Device Reset. Use the Reboot function to reboot the modem. I would reboot any connected devices as well.
What those changes will do is ensure that the modem is running the highest level of encryption available which also allows the wifi to run at faster data rates. The potential movement of the 5 Ghz network to the upper channels will ensure that the modem is running at its highest power output level for 5 Ghz channels which gives the user the largest range and highest data rate for 5 Ghz channels.
Note that I indicated at the very start to do these changes via ethernet connection to the modem. When and if you change the wifi network names and / or passphrases, you would lose connection over wifi, and you would have to connect to the modem once again with those new wifi network names and passphrases. As long as you're prepared for that, it can work, but, I suspect that a good number of users have problems recovering from the changes if their not ready for that to occur.
Once those changes are made, have your son reconnect to the modem if you have changed the wifi network name or passphrase. For the wifi networks, the 2.4 Ghz networks will give the longest range but with a slower data rate. They also suffer from the most interference from your neighbours wifi modems and routers due to that long range. 5 Ghz networks have a shorter range, but with a much higher data rate. As you walk around the house with a wifi scanner loaded on laptop, you can see the changes in received power levels from both networks.
Fwiw, the Intel or Broadcom designs these modems, which are then built by various manufacturers. The wifi component of the newer modems are actually surprisingly good, but, the ISPs disable a good number of features which would provide better performance for wifi networks. This keeps the maintenance and support costs down, but, drives users to distraction when their wifi networks don't measure up to the expectations.
Your modem is currently running in Gateway mode, operating as a modem and router. It can be set to run as a modem only, allowing you to use any router that so choose. That is a typical approach as it give the user far greater control over the various functions that result in better wired and wifi networks. For a small house, I suspect that a single router would suffice, although I prefer to run a wired ethernet network for fixed devices as they run interference free, compared to wifi networks.
So, yes, you can definitely use a third party router for your network.
The Netgear Nighthawk 5000 that you indicated.... is this the router that you're referring to?
Fwiw, I run a Asus RT-AC86U that I'm satisfied with. As I'm more familiar with Asus routers, I can be of greater help if you decide to go with an Asus router. There should be users on the forum who can help with Netgear routers. My only recommendations in this regard are to ensure that the router has external antenna, and that the processor is a minimum 1.4 Ghz processor. There are 1.8 Ghz processor routers on the market now as well, the Asus RT-AC86U being one of them. If you run gigabit rates, router horsepower is the name of the game, in order to run the data rates and any router functions that you might be interested in running.
For ways to connect to upstairs, look behind any wallplate that has a cable or telephone port on it. What you're looking for is the presence of more cables, such as Cat-5 ethernet or perhaps RG-6 cables for cable or satellite purposes. The Cat-5 cabling would allow you to run an ethernet network in the home. Any additional RG-6 coax cables would allow you to move the modem around the house to a better location for wifi purposes. You can also run ethernet via the coax cables by using ethernet to coax adapters. This can work very well with the right adapters and splitters or amplifiers, depending on what is required.
Lastly, I'd like you to load inSSIDer Lite and possibly Lizard systems wifi scanners on a laptop if you have one that can be used for wifi scanning purposes, and also on your son's wifi connected pc.
These can be found at the following locations:
inSSIDer Lite: Requires a freebie account set up to use it. That is displayed when you go to download the application.
Lizard Systems wifi scanner:
A freebie home user licence can be obtained by using the Get Licence link for the Wifi Scanner on the following page:
When you walk about your home with the wifi scanner running on a laptop, keep in mind which channel you are using (149 to 161) and have a look at the graphical display on the inSSIDer or Lizard Systems display. That will show you just how many other network are running on your channel. Stop in place for two to three minutes so that the application has enough time to adjust to the new location in your home. You can sort the data in the text data display by selecting the column titles to sort the data up or down. Sorting the channel column will allow you to determine how many networks are running on each channel. Sometimes there are too many to determine from the graphical display, so, sorting the text data is the only way to determine that.
The question of the day is how many other networks are you competing with? The wifi scanners will tell you that. Note that for your son's pc upstairs, as he's located at a higher elevation, his pc will have a larger Radio Frequency horizon, so, the scanners on his pc will show more networks from around the neighbourhood.
What you might find is that running in the higher 5 Ghz band, you have competition from your neighbours. That competition will be countered by the higher power output from the modem. At the higher 5 Ghz channels, its 1 watt. For the lower 5 Ghz channles, its 50 or 200 milli-watts depending on when the device was approved by Industry Canada. That power difference at the higher channels does make a positive difference, despite the competition from the neighbours. So, even with that competition, you might find that you're better off running channels 149 to 161 instead of down around channel 36. That would take a little experimentation to confirm it, but, if you have time someday, you can reset the wifi channel in the modem to run a test for different channels.
Personally speaking, I've written off the 2.4 Ghz wifi channels in my neighbourhood. With at least 35 or more modems and routers running nearby, the data rates in that band are pretty slow, so, I've moved everything possible up to the 5 Ghz band. When you look at the inSSIDer Lite display, that is probably what you will find. The left side 2.4 Ghz band is probably over crowded, and the right side 5 Ghz display might be ok. You will have to determine that yourself. You can ask your son to take a screen shot and save the image so that you can post it in another post. Use Control + Alt + Delete (simultaneously) to capture the image, then paste that into something like Microsoft Paint which comes with Windows operating systems. Save that image. It will save with a .png extension. Then you can post that image.
Ok, hope this helps. Please let me know if you have more questions. At any time, if you're stuck with something, don't hesitate to post a question, or contact tech support to have the Customer Service Rep change any settings for you.