Rogers Rocket Wi-Fi Modem – Firmware Trial

[Jason10]

I tried sending my Modem info to the @CommunityHelps mod but the PM won't send, user is disabled from being sent messages??

[RogersCilio]

Hey @Jason10,

Welcome to the Rogers Community Forums!

I've doubled checked your profile to ensure all permissions are enabled, everything checks out fine. Can you try to PM @CommunityHelps again please? If you run into problems, let us know and I'll have Communityhelps reach out to you.

Cheers,

RogersCilio

[Jason10]

Hello @RogersCilio


There is no member with the username name: . Their names have been removed from the Send to list.

Is the message I get when trying to send them a PM

[RogersCilio]

Hey @Jason10,

I had Communityhelps reach out to you. This may sound like a silly question, but by any chance are you including the @ symbol, followed by the username? If so, then that'll be the problem.

In the 'Sent to', don't include the @ symbol with the username. Just simply put in the username :).

Hope that helps!

RogersCilio

[Jason10]

Yes I did include the "@" in the username

[donnelly_7]

Rogers Rocket Wi-Fi Modem Firmware Trial

[donnelly_7]

Please add me!

[Datalink]

@donnelly_7 to signup for the trial firmware if you're interested, send a private message to @CommunityHelps  Follow that link to the public page for @CommunityHelps and then select the link on the right hand side to "Send this user a private message" to navigate to the message composition page. It will already be addressed. 

Fill in the title: Rocket Modem Firmware Trial

In the text area, add your modems:

MAC Address
Serial Number
Modem Model: this can be found on the product sticker at the back of the modem, CGN3xxxx 

The first two can be found in the Status page when you log into the modem or on the back of the modem. They can be copied from the Status page and pasted into the message. 

When you're logged into the forum, watch for a number overlaid on your avatar at the top right hand corner signifying a response from one of the moderators. Select that link and follow it down to your message inbox.  You should see a disclaimer that has to be acknowledged prior to loading the latest version of trial firmware. 

Keep an eye open on this thread or the Open Issues thread for any particular requirements for rebooting or running a factory reset on a modem with trial firmware loaded.  The usual rule these days is that a modem reboot or restart is fine to run.  A Factory Reset will cause the modem to revert to the current production firmware for that modem.  

[wongnog]

Reporting a bug, as originally posted here:

Hitron CODA-4582 user on 2.0.10.31.  If user has IPv6 disabled and wants to manually set DNS servers, you cannot leave the IPv6 DNS1 or DNS2 addresses blank.  Instead you get an error message:

[ERROR] - Please input the DNS infomation !

Likewise, if user has IPv4 disabled, you cannot leave the DNS1 or DNS2 addresses blank.  I recommend the following bugfixes:

• Only show all 4 DNS addresses when running in Dual mode
• Fix the spelling mistake for "infomation" in the above error message

[RogersDave]

---

@wongnog wrote:

Reporting a bug, as originally posted here:

Hitron CODA-4582 user on 2.0.10.31.  If user has IPv6 disabled and wants to manually set DNS servers, you cannot leave the IPv6 DNS1 or DNS2 addresses blank.  Instead you get an error message:

[ERROR] - Please input the DNS infomation !

Likewise, if user has IPv4 disabled, you cannot leave the DNS1 or DNS2 addresses blank.  I recommend the following bugfixes:

• Only show all 4 DNS addresses when running in Dual mode
• Fix the spelling mistake for "infomation" in the above error message

---

Thanks, reported to Hitron.