Got internet installed yesterday, speeds were great till this morning. Pings went sky high, on a speed test would was hickuping big time, from 1 to 250 back to 10 or so, back to 200, back to not moving at all. Reboot and back to normal. Still on .13
i guess crazy ride just starting for me
@tonytoronto After 24-48 hours the modem will update it's firmware to the latest network wide release which is version .19
You can try disabling the 2.4Ghz WiFi band and see if the speeds improve, as a troubleshooting step.
Thanks for the info. The modem ended up getting .23 this afternoon, so far so good, lets see what happens overnight. The 2.4 radio was going to be my next step, already setting up a AP and was going to leave wi-fi off in the CODA.
When it works, seems like decent router with decent Wi-Fi, hopefully big bugs will be fixed.
Just got DOCSIS 3.1 here in Whitby.. .23 firmware. Latency has nearly halved..
@coder_1990 Nice to see results reported from Whitby. I too am from Whitby, and I have been waiting until there was some stability and a final beta moved to production, and even then I will wait a bit before considering moving up.
Nice to see though. Congrats.
I have same issue reboot needed 3 times daily. Call tech support daily swapped
coda 4582 yesterday same problem. Plugged directly in wall old ignite modem rarely needed reboot. Could be a dual band issue 2.4 may cause interference.
Is .23 beta f/w or stable release?
I got .23 right now and ran a speedtest yesterday and noticed my speeds were consistent through the day in regards to hitting the roof at 750 (when I used to get 950) and then slowly decents to 625-650. I would like to say I've had this f/w for a few days but it's hard to say.
Will the logs tell me when the f/w has been pushed to the modem? I think I noticed some downtime Sunday evening figuring it was just the modem getting updated.