Rogers Hitron CODA-4582 Hardware

Need Help?

That's what we're here for! The goal of the Rogers Community is to help you find answers on everything Rogers. Can't find what you're looking for? Just ask!
cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Highlighted
Resident Expert
Resident Expert
Posts: 6,986

Re: Rogers Hitron CODA-4582 Hardware

@Triple_Helix please see the following post;

 

http://communityforums.rogers.com/t5/forums/forumtopicpage/board-id/Getting_connected/message-id/388...

 

At the present time, versions beyond .14 are targeted installations, so, you might not see any update beyond your current firmware version until a network wide release.  That all depends on whether or not your modem is seen to be experiencing any of the issues that the targeted releases are aiming to resolve.  As the saying goes, if it ain't broken, don't fix it. 



Highlighted
I've Been Around
Posts: 1

Re: Rogers Hitron CODA-4582 Hardware

Wish I hadn't upgraded to this modem. I was consistently getting 700+ mbps download speeds using the previous modem with my Gigabit service, now the max I'm getting is around 400, and with the top port over ethernet it looks like its limited to 100mbps. Currently on the 2.0.10.14 firmware. 

Highlighted
I'm Here A Lot
Posts: 6

Re: Rogers Hitron CODA-4582 Hardware

Same here,.. for almost 2 weeks i am getting up to 100 on 1gb service. This is completely unconvinient.

Highlighted
I'm a Reliable Contributor
Posts: 586

Re: Rogers Hitron CODA-4582 Hardware

@Akki @fffvde

 

If you guys are on the 2.0.10.14 firmware and receiving terrible speeds I would reccomend private messaging  @RogersDave to send you firmware 2.0.10.18 as it includes protection from interference that could be causing the very low download speeds that you are experiencing. It also provides enhancements to the 2.4/5 GHz bands and includes a fix for the autonegociation problem on the ethernet port 1. 

 

Also in the PM I would suggest sending your modem's MAC Address which is located behind the modem so that he can run further tests to find out what is causing the slow download speeds.

Highlighted
I'm Here A Lot
Posts: 6

Re: Rogers Hitron CODA-4582 Hardware

Thanks eddie!
pm sent
Highlighted
I Plan to Stick Around
Posts: 48

Re: Rogers Hitron CODA-4582 Hardware

I just got updated to 2.0.10.19

Highlighted
I Plan to Stick Around
Posts: 19

Re: Rogers Hitron CODA-4582 Hardware

gigabit slow internet speeds (CODA-4582)

 

http://www.speedtest.net/result/5921169153

 

Technician discovered there is signal noise in the area (something to do with channel 2), a maintenance team was then dispatched. The maintenance work has been completed but there is no change.

 

Any advice?

 

Downstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Signal noise ratio (dB)
1 615000000 256QAM 6.200 35 35.780
2 363000000 256QAM 0.200 10 35.595
3 369000000 256QAM 0.400 11 35.595
4 375000000 256QAM 0.800 12 35.595
5 381000000 256QAM 0.800 13 35.595
6 387000000 256QAM 1.300 14 35.595
7 393000000 256QAM 1.700 15 35.595
8 399000000 256QAM 2.000 16 35.595
9 405000000 256QAM 2.000 17 35.595
10 411000000 256QAM 2.100 18 35.780
11 417000000 256QAM 2.500 19 35.780
12 423000000 256QAM 2.400 20 35.595
13 429000000 256QAM 3.400 21 36.387
14 435000000 256QAM 3.300 22 35.780
15 441000000 256QAM 3.400 23 36.610
16 447000000 256QAM 3.600 24 36.387
17 555000000 256QAM 4.900 25 35.780
18 561000000 256QAM 4.800 26 35.780
19 567000000 256QAM 4.700 27 35.595
20 573000000 256QAM 4.700 28 35.595
21 579000000 256QAM 4.300 29 35.780
22 585000000 256QAM 4.400 30 35.595
23 591000000 256QAM 4.900 31 35.595
24 597000000 256QAM 5.500 32 35.780
25 603000000 256QAM 5.900 33 35.780
26 609000000 256QAM 6.100 34 35.780
27 357000000 256QAM 0.300 9 35.780
28 621000000 256QAM 6.400 36 35.780
29 633000000 256QAM 7.100 37 36.610
30 639000000 256QAM 7.300 38 36.387
31 645000000 256QAM 7.500 39 36.387
32 651000000 256QAM 7.700 40 36.387
OFDM Downstream Overview
Receiver FFT type Subcarr 0 Frequency(MHz) PLC locked NCP locked MDC1 locked PLC power(dBmv)
0 NA NA NO NO NO NA
1 NA NA NO NO NO NA
Upstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Bandwidth
1 23700000 ATDMA - 64QAM 37.500 2 6400000
2 38596000 ATDMA - 64QAM 42.000 3 3200000
3 30596000 ATDMA - 64QAM 40.250 1 6400000
OFDM/OFDMA Overview
Channel Index State lin Digital Att Digital Att BW (sc's*fft) Report Power Report Power1_6 FFT Size
0 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
1 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
Highlighted
I Plan to Stick Around
Posts: 15

Re: Rogers Hitron CODA-4582 Hardware

Is there a way to edit the CODA-4582 "backup" cfg file? I liked the fact that on my old DLink router the backup file was not encrypted and just a standard txt file. It was very easy to edit and upload any changes.

Highlighted
I Plan to Stick Around
Posts: 8

Re: Rogers Hitron CODA-4582 Hardware

I hoping to get the latest firmware soon.    Sent my request earlier today to @RogersDave

 

Highlighted
I'm a Reliable Contributor
Posts: 381

Re: Rogers Hitron CODA-4582 Hardware

Rogers Hitron CODA-4582 - Any documentation about what the light colours/front panel info does?

 

Would anyone have the operating manual for the Hitron CODA-4582 and can tell me what the colour of the lights and any other troubleshooting tips if some lights are flashing etc?  I want to help my friend setup his modem and am checking his network.  I just want to be armed with info in case we encounter any issues.

 

Also, perhaps we should start a troubleshooting thread specific to the Hitron CODA-4582 and have it focused or read only so that it doesn't snowball into something off topic.  

 

Thanks