Ignite Internet Gigabit - Slow Speeds

Need Help?

That's what we're here for! The goal of the Rogers Community is to help you find answers on everything Rogers. Can't find what you're looking for? Just ask!
cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
I've Been Here Awhile
Posts: 2

Re: Ignite Internet Gigabit - Slow Speeds

I had a Rogers tech at my house 2 days ago and they did a speed test and only got 150mbps on what ever software they use
Resident Expert
Resident Expert
Posts: 6,306

Re: Ignite Internet Gigabit - Slow Speeds

@SpencerW did the tech indicate that he or she was going to raise a ticket with a senior tech or the maintenance crew?  What were his or her plans to address the situation?  Those notes should be on file, so, if you call tech support you should be able to find out what the next step is.  If you do that, you should ask if another ticket has been raised and if so, is that ticket still open, or has it been closed with providing an resolution to the problem?  If the ticket is still open, where is that ticket sitting in the que, and if its been closed, then another ticket should be raised.  In either case, obtain the ticket number so that you can call tech support and refer to that ticket number, looking for an update. 

 

Are you measuring those low data rates via ethernet, or wifi?  Any speedtest to confirm that the modem is delivering the intended internet plan data rates should be conducted via ethernet. 



I Plan to Stick Around
Posts: 22

Re: Ignite Internet Gigabit - Slow Speeds

My speeds are slow I’m on gigabit getting 600mbps I think my docsis signals aren’t good plz check and fix

*Link removed for privacy reasons*

I Plan to Stick Around
Posts: 22

Re: Ignite Internet Gigabit - Slow Speeds

I Plan to Stick Around
Posts: 22

Re: Ignite Internet Gigabit - Slow Speeds

Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Signal noise ratio (dB)
1 591000000 256QAM -0.600 7 38.983
2 855000000 256QAM -6.300 3 37.636
3 861000000 256QAM -6.300 4 37.636
4 579000000 256QAM -0.800 5 38.983
5 585000000 256QAM -0.700 6 38.605
6 849000000 256QAM -6.100 2 37.636
7 597000000 256QAM -0.900 8 38.983
8 603000000 256QAM -0.700 9 38.983
9 609000000 256QAM -0.900 10 38.983
10 615000000 256QAM -0.800 11 38.605
11 621000000 256QAM -0.800 12 38.983
12 633000000 256QAM -0.600 13 38.983
13 639000000 256QAM -1.000 14 38.983
14 645000000 256QAM -0.900 15 38.983
15 651000000 256QAM -0.900 16 38.605
16 657000000 256QAM -1.200 17 38.983
17 663000000 256QAM -1.400 18 38.983
18 669000000 256QAM -1.500 19 38.983
19 675000000 256QAM -2.000 20 38.983
20 681000000 256QAM -2.000 21 38.983
21 687000000 256QAM -2.200 22 38.605
22 693000000 256QAM -2.100 23 38.605
23 699000000 256QAM -2.200 24 38.983
24 705000000 256QAM -2.300 25 38.983
25 711000000 256QAM -2.300 26 38.605
26 717000000 256QAM -2.800 27 38.605
27 723000000 256QAM -2.900 28 38.983
28 825000000 256QAM -4.600 29 38.605
29 831000000 256QAM -4.700 30 38.605
30 837000000 256QAM -5.000 31 38.605
31 843000000 256QAM -5.700 32 37.636
32 279000000 256QAM 4.000 1 40.946
OFDM Downstream Overview
Receiver FFT type Subcarr 0 Frequency(MHz) PLC locked NCP locked MDC1 locked PLC power(dBmv)
0 4K 275600000 YES YES YES 2.500000
1 NA NA NO NO NO NA
Upstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Bandwidth
1 22100000 ATDMA - 64QAM 27.500 1 3200000
2 36996000 ATDMA - 64QAM 27.500 4 6400000
3 30596000 ATDMA - 64QAM 25.500 3 6400000
4 25300000 ATDMA - 64QAM 27.500 2 3200000
OFDM/OFDMA Overview
Channel Index State lin Digital Att Digital Att BW (sc's*fft) Report Power Report Power1_6 FFT Size
0 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
1 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
I Plan to Stick Around
Posts: 22

Re: Ignite Internet Gigabit - Slow Speeds

Are my signals good
Highlighted
Resident Expert
Resident Expert
Posts: 6,306

Re: Ignite Internet Gigabit - Slow Speeds

@AzaanKamran the top DOCSIS 3.0 channels (1 to 32) are fine.  I wouldn't expect any issues with those, but, the modem isn't using the DOCSIS 3.0 downstream channels at the moment. 

 

The DOCSIS 3.1 OFDM channel is the download channel in use.  There isn't enough data presented in the user interface to know of that channel is operating within spec.  That would require a call to tech support to determine. 

 

The DOCSIS 3.0 upstream channels are all low, lower than normal for this modem which usually runs in the 30 to 32 dBmV range.  That might not be a problem however, depending on the signal levels when they arrive at the neighbourhood node.  They might still be well within spec.  

 

Call tech support and ask the Customer Service Rep to run a signal check on the modem.  Ask if the Downstream OFDM channel is operating within specification and ask if the upstream signal levels are within spec at the neighbourhood node.  

 

I'm assuming that your in a house, which is connected to a neighbourhood node.  If you live in an apartment/condo/highrise, then your building could have its own Multiple Dwelling Unit, or several of them, to service the apartments in the building.  That might explain the low upstream levels.  If that is the case, then the question of the upstream levels becomes, "are they acceptable when they arrive at the MDU?"

 

One last question at this point, how are you measuring the data rate, via ethernet or wifi.  If its via wifi, then you need to run a speedtest via ethernet with a pc/laptop which will run download rates in the order of 930/940 Mb/s. 

 

If you're testing to this point has been with wifi, don't call tech support until you've had a chance to run a test via ethernet. 



I Plan to Stick Around
Posts: 22

Re: Ignite Internet Gigabit - Slow Speeds

I’m just getting 800mbps download
Resident Expert
Resident Expert
Posts: 6,306

Re: Ignite Internet Gigabit - Slow Speeds

Yes, but, is that via ethernet or via wifi?

 

Can you have a look at the following post and if you're running a Windows pc or laptop, check the current TCP Receive Window setting.  You could set that to "Experimental", reboot the pc or laptop and then rerun the speedtest to see if that makes a difference in the results.

 

https://support.microsoft.com/en-us/help/4494445/tcp-receive-auto-tuning-level-feature-in-windows

 

 



I Plan to Stick Around
Posts: 22

Re: Ignite Internet Gigabit - Slow Speeds

Ethernet through mywifi from internet to modem