cancel
Showing results for 
Search instead for 
Did you mean: 

Hitron 30dBmV upstream signal

gregzetko
I've been here awhile

According to this post, the upstream signals should be around 38dBmV but I have 30.000 on Ch1, 31.500 on Ch2, 29.500 on Ch3, and 31.750 on Ch4. I'm experiencing very low bandwidth with a ton of packet loss. What should I do?

3 REPLIES 3

Re: Hitron 30dBmV upstream signal

Datalink
Resident Expert
Resident Expert

@gregzetko I need to update that post to include the newer modems now in use.  If you have a white HItron CODA-4582 modem then those signal levels are fine.  Can you post that entire signal level table from the downstream overview line all the way to the very bottom right hand corner of that tables bottom line.  Select or highlight that entire area, right click, select Copy.  Then start a post, right click, select Paste.  That will paste in the copied data so that we can have a look at it.

 

You can call tech support and ask the Customer Service Rep to run a signal check on the modem to see what turns up. Explain to the Csr what you're seeing for data rates and packet loss.  Ask the Csr to check the noise level records as well. If you do call tech support please let us know what the signal check indicated as well as the noise level. 

Re: Hitron 30dBmV upstream signal

gregzetko
I've been here awhile

Downstream:

1591000000256QAM3.900740.946
2855000000256QAM-2.200337.636
3861000000256QAM-2.600438.605
4579000000256QAM3.900540.366
5585000000256QAM3.900640.946
6849000000256QAM-1.400238.983
7597000000256QAM3.800840.946
8603000000256QAM3.700940.946
9609000000256QAM3.9001040.946
10615000000256QAM3.9001140.946
11621000000256QAM3.8001240.946
12633000000256QAM4.2001340.366
13639000000256QAM4.2001440.946
14645000000256QAM4.3001540.946
15651000000256QAM4.3001640.946
16657000000256QAM4.2001740.366
17663000000256QAM4.1001840.946
18669000000256QAM3.9001940.946
19675000000256QAM4.2002040.946
20681000000256QAM4.1002140.946
21687000000256QAM4.0002240.946
22693000000256QAM3.8002340.946
23699000000256QAM3.6002440.946
24705000000256QAM3.4002540.946
25711000000256QAM3.1002640.366
26717000000256QAM2.8002740.366
27723000000256QAM2.7002840.366
28825000000256QAM0.7002938.983
29831000000256QAM0.4003038.605
30837000000256QAM0.0003138.983
31843000000256QAM-0.7003238.983
32303000000256QAM2.7001

40.946

 

Upstream: 

136996000ATDMA - 64QAM30.00046400000
222100000ATDMA - 64QAM31.50013200000
330596000ATDMA - 64QAM29.25036400000
425300000ATDMA - 64QAM31.75023200000

Re: Hitron 30dBmV upstream signal

@gregzetko your signal levels are ok from what I can see.  Do you have a white CODA-4582modem?  That is the only white cased modem that Rogers uses.  The model number will be found on the back of the modem.  If that's the modem that you have then there a couple of other sections of that table that are missing but only the OFDM section is currently in use.  Do you happen to have Fibre to the home service?  The signal to noise ratios are very consistent which is indicative of FTTH.  If you do have FTTH service then this could be a Fibre issue instead of a cable issue. 

Topic Stats
  • 3 replies
  • 1344 views
  • 0 Likes
  • 2 in conversation