The internet today has been very flaky. Wireless, and Wired LAN ports going up and down intermittently. Had to reboot at least twice today. Also, the DOCSIS Event log bug prevents me from seeing any event around these failures. Can the "cusadmin" user be assigned a different logging level for the testers?
I would have taken it as a surprise, however no such luck. No longer able to access the login at the usual 192.168.100.1 address. Modem does seem to be continuing to operate unhindered. Pings to common websites continue to be low with gaming and VOIP performing reliably. Download and upload speeds are at the maximum attainable rate for the gigabit plan as they were with previous iteration of firmware. Nothing out of the ordinary to report really. There was a lot of fibre trenching being done in my area by Rogers but I haven't seen any updates to the infrastructure in my building as of yet, so maybe they are still on the way.
You on the .35? Haven't had a problem logging in at all. Almost 7days running now too.
I am indeed on the .35 variant. I will try a reboot of my hardware today and see when the inability to log in happens again. Which browser are you using when trying to access the login page?
Edge Chromium on windows. Still can log in, on the old .33 was lucky if you maybe got 1hr before it became inaccessible. Only way was if it was rebooted, and then you'd still get the limited access.
OFDM got turned on in my area!
|Port ID||Frequency (MHz)||Modulation||Signal strength (dBmV)||Channel ID||Signal noise ratio (dB)|
|Receiver||FFT type||Subcarr 0 Frequency(MHz)||PLC locked||NCP locked||MDC1 locked||PLC power(dBmv)|
|Port ID||Frequency (MHz)||Modulation||Signal strength (dBmV)||Channel ID||Bandwidth|
|Channel Index||State||lin Digital Att||Digital Att||BW (sc's*fft)||Report Power||Report Power1_6||FFT Size|
© 2021 Hitron Technologies Inc. All rights reserved.