FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

Need Help?

That's what we're here for! The goal of the Rogers Community is to help you find answers on everything Rogers. Can't find what you're looking for? Just ask!
cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
DragonSpyre
I'm Here A Lot
Posts: 6

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

I just had to do a hard reset of my Rogers modem, not only was the statistics page not available but there was a hard lockup where the front lights were showing sync and activity but no surf was able to be had.  After rebooting the Rogers modem (white Hitron monolith) my RT-AX88U router started processing the magic sand again.  I haven't ever had anything like this happen before so I will keep a close eye on it over the weekend and report if anything else is going on.

Triple_Helix
I Plan to Stick Around
Posts: 329

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

I'm in North Oshawa.

 

Downstream Overview
Port IDFrequency (MHz)ModulationSignal strength (dBmV)Channel IDSignal noise ratio (dB)
1591000000QAM2563.099738.983
2597000000QAM2563.200839.397
3603000000QAM2563.599938.983
4849000000QAM2561.400237.636
5855000000QAM2561.500337.636
6861000000QAM2562.700437.355
7579000000QAM2562.700540.366
8585000000QAM2562.400638.983
9279000000QAM256-1.700138.605
10609000000QAM2562.9001040.366
11615000000QAM2563.4001140.366
12621000000QAM2563.5991238.983
13633000000QAM2563.7001340.366
14639000000QAM2562.9001438.605
15645000000QAM2563.2991538.983
16651000000QAM2563.7991638.983
17657000000QAM2563.2991738.983
18663000000QAM2563.4001840.366
19669000000QAM2563.5991938.983
20675000000QAM2563.5992038.983
21681000000QAM2563.9002138.605
22687000000QAM2563.4002238.605
23693000000QAM2563.2002338.605
24699000000QAM2563.4002438.983
25705000000QAM2563.2992538.983
26711000000QAM2562.0992638.983
27717000000QAM2561.4002738.983
28723000000QAM2561.7992838.605
29825000000QAM2560.5002938.605
30831000000QAM2561.2003038.983
31837000000QAM2560.9003138.983
32843000000QAM2561.0993238.605
OFDM Downstream Overview
ReceiverFFT typeSubcarr 0 Frequency(MHz)PLC lockedNCP lockedMDC1 lockedPLC power(dBmv)
0NANANONONONA
14K275600000YESYESYES-0.400002
Upstream Overview
Port IDFrequency (MHz)ModulationSignal strength (dBmV)Channel IDBandwidth
12590000064QAM47.02026400000
23870000064QAM48.27046400000
33230000064QAM47.02036400000
42110000064QAM46.01013200000
50QAM_NONE----6400000
60QAM_NONE----6400000
70QAM_NONE----6400000
80QAM_NONE----6400000
OFDM/OFDMA Overview
Channel IndexStatelin Digital AttDigital AttBW (sc's*fft)Report PowerReport Power1_6FFT Size
0OPERATE0.24749.22139.600054.781547.00002K
1DISABLED0.00000.00000.00000.00000.00002K
Triple_Helix
I Plan to Stick Around
Posts: 329

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

The only thing I see with this new Firmware is I don't see any DOCSIS Event logs? I rebooted the Modem 3 to 4 times.

 

2021-01-19_14-07-30.png

blues_clues
I Plan to Stick Around
Posts: 142

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

@RogersIan 

My modem rebooted this early morning, around 4:00am.  I also had intermittent outages this morning around 10:00am and I had to physically unplug the modem and plug it back in.  I'm not sure if this is a firmware issue or due to OFDM/OFDMA enabled on my modem and testing is being done.   Do you have any insight as to the latter?  I know I cannot call Rogers tech support since I am a beta tester but I may need to be removed from the program as my son does online learning and cannot tolerate the outages during the day.

RogersIan
Product Manager
Product Manager
Posts: 56

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

 

 

Thanks for the feedback on 7.1.1.35 provided so far, keep it coming.

 

To confirm in 7.1.1.35 we did not implement a fixes for either of:

  • GUI login fails in bridge mode
  • Blank Event Log

RogersIan

RogersIan
Product Manager
Product Manager
Posts: 56

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

 

We will be rolling out new code for our CGN3AC  trial users over the next couple of days.

The new build 4.5.8.42 has 2 changes which are both geared toward the backend management.

 

  • v6 management IP enablement - not implemented yet
  • Telemetry updates

Once you have had some time with the new code please let us know what you think.

 

Thanks,

RogersIan

noziel
I Plan to Stick Around
Posts: 41

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

Hi, looking at my modem AC it's running trial 4.5.8.43.  Not sure if you had a typo or my modem will be downgraded?

user12343543
I Plan to Stick Around
Posts: 35

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

I'm still on  7.1.1.33 is this to be expected?

lethalsniper
I'm an Enthusiast
Posts: 1,009

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

I’m kind of confused me and my in laws live in the same building i live on the 7th floor in-laws live on the 9th floor I have the coda modem they have the Cgn3acsmr modem when running a ping / jitter test both wired when doing the test the Cgn3acsmr always comes on top with lower jitter they hit 1 jitter the coda get 6 jitter and a slightly higher pings. What I wanna know have they fixed the issues with the puma6 latency or does the Cgn3acsmr modem work or is just more compatible in our area / building
Datalink
Resident Expert
Resident Expert
Posts: 7,132

Re: FEEDBACK - Rogers Rocket Wi-Fi Modem Firmware Trial

@lethalsniper I don't recall if you have an OFDMA upstream channel running, but I don't believe so.  In that case, the upstream channels on both modems are using 6 Mhz wide QAM channels.  

 

The downstream channels are a different story.  The CGN3ACSMR will be using twenty four 6 Mhz wide channels.  The CODA-4582 will be using the OFDM channel with somewhere under 4096 sub-carriers, don't know the exact number.  Using the downstream OFDM channel will result in a greater number of transmit time slots, however, the downstream loads have increased significantly, which counteracts the increase in transmit time slots.  

 

Now, also keep in mind that Rogers may have assigned all of the OFDM capable modems to the OFDM channel, significantly decreasing the load on the QAM channels.  I don't know if there is a mixed mode in operation whereby the modems use both OFDM and QAM channels for customer data or if the OFDM channel has the majority load of the customer data, for those customers who are using an OFDM capable modem.  That would also explain why customers are see decreasing performance as the overall OFDM load has increased significantly since March 2017.

 

Looking back on some test data, there is a three to four times increase in the downstream ping times from the CMTS.  I'll have to do a little more testing to get a better idea of what that number is, but, there is a significant increase in that CMTS to modem time frame, despite the use of the OFDM channel.  

 

The end goal of the cable operators will be to remove the QAM channels and reassign the frequencies to OFDM channels, significantly increasing the throughput of the CMTS to modem portion of the system.  That will take a long time to accomplish, just like removing analogue tv channels took a long time to remove.  Its possible to run custom OFDM configurations around the QAM channels but I don't know if any cable operator is actually doing it.  

 

For what its worth, and I've said this in the past, I think your apartment building has a problem with its cable system, and no amount of complaining on the forum will fix that.  You need to be speaking with the building management and owners to change out the cabling and basement MDU's.  The goal should be to install fibre.  The copper cabling could probably be left in place and abandoned instead of paying to remove it.  Pull fibre and install fibre ports in all apartments.