Correction, this only impacts CODA modems not the CGN3 if you reset to factory setting it back to production firmware. CGN3xxx modems remain with the trail fw.
Looks like my download profile has been reduced to 500u, upload is at its best:
This is hard wired to CODA. Hardware Version 1A Software Version 184.108.40.206
|Port ID||Frequency (MHz)||Modulation||Signal strength (dBmV)||Channel ID||Signal noise ratio (dB)|
|Receiver||FFT type||Subcarr 0 Frequency(MHz)||PLC locked||NCP locked||MDC1 locked||PLC power(dBmv)|
|Port ID||Frequency (MHz)||Modulation||Signal strength (dBmV)||Channel ID||Bandwidth|
|1||23700000||ATDMA - 64QAM||40.250||2||6400000|
|2||38595785||ATDMA - 64QAM||43.250||3||3200000|
|3||30596000||ATDMA - 64QAM||40.250||1||6400000|
|Channel Index||State||lin Digital Att||Digital Att||BW (sc's*fft)||Report Power||Report Power1_6||FFT Size|
I requested the update to my CGNM-3552 modem because I was having issues connecting to my chromecast. The update has fixed this, but now I'm having other issues. My Nexus 5 now will not stay connected to this wifi network (it's fine with other networks) and constantly cycles between disconnected -> scanning -> connected -> disconnected. I tried setting a static IP for the phone but that didn't work. I also tried using only 2.4 ghz and not 5.0, but that doesn't help either. Other devices, such as my laptop and iPod, have no issues remaining connected. This was also not an issue with my old modem or before the modem update, so I doubt it's an issue with my phone.
Here's the info displayed on my modem's page:
If anyone has any suggestions I'd love to hear them!
I just received an update from 220.127.116.11 to 18.104.22.168. I wasn't able to access the login page after the SW upgrade and reboot. I had to manually power off and on to access the login page at 192.168.0.1. I am on CODA-4582 V2 hardware but not the latest replacement V2 hardware. (waiting for a re-ship of the newer modem)
@schadwi6, is your problem resolved after a factory reset? There is a big change between version 22.214.171.124 and 126.96.36.199 that requires a factory reset for some Android devices (usually Nexus/Pixel). This should not be necessary anymore starting with version 188.8.131.52.
New Firmware Version Notification
CODA series: 184.108.40.206
CGN3 'AC' series: 220.127.116.11
I have updated the release notes in this post.
I have also started updating some modems to the newest version of firmware: 18.104.22.168 for CGN3 'AC' series modem and 22.214.171.124 for CODA series.
In a few days, based on feedback received, I'll continue the deployment to all other modems (it will probably last until the end of next week).
With 126.96.36.199 firmware on CODA modem I'm getting frequent random disconnects on WiFi. It was happening at the beginning when I got the modem months ago on earlier versions of firmware. It is something to do with combination of my wireless card Killer Wireless 1535 from Qualcomm Atheros Communications and chipset used in Hitron modems. I've seen a lot of reports on the net with different routers having the same issues. My computer is Dell laptop XPS 13 9360. On one occasion with recent firmware .31 the radio locked up all together. Modem stopped broadcasting SSID and 5G channel disappeared. I used to have this issue a lot on previous modem CGN series back in Jan / Feb of 2017. LED on the front panel is still on, wireless status in modem page was enabled and active but no wireless signal (checked on multiple computers). The only way to get the radio back is to reboot or disable and enable wireless channel.
Most of the time laptop will loose connection from CODA 5G ac WiFi (the strongest signal) and log into my old backup Linksys router different channel and much weaker signal. After minute or so it will go back to CODA 5G.